• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.311-314
• /
• 2003

This paper describes a virtual instrument system with faulty sensor reconstruction mechanism based on personal computer. This system consists of sensor control board using 16bit RISC machine, error signal reconstruction algorithm based on principal component analysis and auto tunned GUI interface according to the attached sensors. USB module is used for fast communication between PC and sensor controller. To show the veridity of the proposed system, the proposed system was applied to the developed sun tracker with 8 solar sensors.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.1
• /
• pp.18-23
• /
• 2023

A smart sensor is the key element to implement IoT (Internet of Things) service, as a terminal equipment. This paper investigated the design method of a power supply using energy harvesting technique for a smart sensor. the performance of a power supply using a solar cell and a piezoelectric transducer as a energy harvesting device was verified and the method to optimize a power supply was analyzed depending on the operating condition of a smart sensor. Also the method to increase a battery life cycle as a auxiliary power supply was proposed.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.4
• /
• pp.55-62
• /
• 2001

A parabolic dish concentrator used in a high temperature application of solar energy tracks the sun's movement by two axis sun tracking system. In such a system, sun tracking performance affects the system efficiency directly. Generally the higher the tracking accuracy is, the better the system performance is. A large number of parabolic dish type concentrators has been developed and implemented in the world. However none of them clearly provided a qualitative method of how the accuracy of the sun tracking system can be evaluated. The work presented here is the evaluation of sun tracking performance of parabolic dish concentrator, which follows the sun's movement by the sensor, using a computer vision system. We install a camera on the parabolic dish concentrator. While the concentrator follows the sun, sun's images are captured continuously. Then the performance of sun tracking system was evaluated by analyzing the variation of the position of the sun in the captured images.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.13-14
• /
• 2014

본 논문에서는 유사 DC-Link 타입의 태양광 마이크로 인버터에서 요구되는 대용량의 전해 커패시터의 단점을 지적하고 이를 제거하기 위해 shunt 방식으로 연결되는 양방향 벅-부스트 컨버터 제어방법을 제안한다. 태양광 마이크로 인버터는 동작 특성상 PV 입력단에 120Hz 리플이 존재하지만 대용량의 전해 커패시터를 적용함으로써 리플을 제거할 수 있다. 하지만 전해 커패시터의 짧은 수명이 전체 시스템의 신뢰성을 저하시키기 때문에 이를 극복하기 위한 부가적인 회로가 필요하다. 본 논문에서는 제안한 1차측의 플라이백 스위치 전류 제어기의 레퍼런스를 공유함으로써 전류 센서수를 감소시키고 PV 입력단 Capacitance를 낮출 수 있는 양방향 벅-부스트 회로의 제어기를 시뮬레이션을 통하여 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.194-196
• /
• 2006

본 논문은 신재생에너지 분야 중 태양광/풍력발전시스템의 모니터링에 관한 것으로서, 500W 태양광 발전시스템 1기와 풍력발전시스템 2기를 각각 설치하고, LabVIEW를 이용하여 원격 모니터링 시스템을 구축한 후, 이를 이용하여 동시 다채널 모니터링 하는 것에 관한 것이다. 모니터링을 위하여 각 시스템 별로 센서를 부착하고, 출력되는 아날로그 데이터를 실시간으로 네트워크를 통하여 모니터링 함으로써 각 발전원별 출력특성을 분석하고자 하였다.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.314-316
• /
• 2005

태양광 발전은 화석에너지의 대안으로서 청정에너지로서의 상징성을 발휘하며 시범사업 및 일반보급사업을 통하여 국내에 확대 보급되고 있다. 본 논문에서는 에너지관리공단의 지원을 받아 동신대학교 생물자원산업화지원센터에 설치된 10kW 태양광 발전시스템의 운전특성 연구에 관한 것으로서, RS-232 통신을 이용 설치된 센서의 출력 값을 PC로 모니터링하여 결과값을 분석하였다.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_2
• /
• pp.1541-1551
• /
• 2023

Radiometric calibration is a fundamental step in ocean color remote sensing since the step to derive solar radiance spectrum in visible to near-infrared wavelengths from the sensor-observed electromagnetic signals. Generally, satellite sensor suffers from degradation over the mission period, which results in biases/uncertainties in radiometric calibration and the final ocean products such as water-leaving radiance, chlorophyll-a concentration, and colored dissolved organic matter. Therefore, the importance of radiometric calibration for the continuity of ocean color satellites has been emphasized internationally. This study introduces an approach to improve the radiometric calibration algorithm for the visible bands of the Geostationary Ocean Color Imager-II (GOCI-II) satellite with a focus on stability. Solar Diffuser (SD) measurements were employed as an on-orbit radiometric calibration reference, to obtain the continuous monitoring of absolute gain values. Time series analysis of GOCI-II absolute gains revealed seasonal variations depending on the azimuth angle, as well as long-term trends by possible sensor degradation effects. To resolve the complexities in gain variability, an azimuth angle correction model was developed to eliminate seasonal periodicity, and a sensor degradation correction model was applied to estimate nonlinear trends in the absolute gain parameters. The results demonstrate the effects of the azimuth angle correction and sensor degradation correction model on the spectrum of Top of Atmosphere (TOA) radiance, confirming the capability for improving the long-term stability of GOCI-II data.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.377-385
• /
• 2017

The solar cell need the characteristic interpreting because the solar cell changes greatly according to the isolation, temperature and load in the photovoltaic development. Moreover, to get many energy in photovoltaic development need the position tracking of the sun according to the environment change. Also, The solar cells should be operated at the maximum power point. In this paper, I used microprocessor and sensor and designed to improve the efficiency of the photovoltaic system the photovoltaic position tracker device, and compared the normal photovoltaic system of fixed form with the photovoltaic system of solar position tracked form. Moreover, compared the catalogue of solar cell module and the simulation through a mathematics modelling with the solar cell's characteristic interpreting and composed an power conversion system with boost converter and voltage source inverter. Used the constant voltage control method for maximum power point tracking in boost converter control and, used the SPWM(Sinusoidal Pulse Width Modulation) control method in inverter control. The result was less then 5% when compared the catalogue of solar cell module and the simulation through a mathematics modelling. The boost rate of boost converter was similar to 167 % with the simulation.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.123-135
• /
• 2013

The reflectance observed in the visible channels of a geostationary meteorological satellite can be used to calculate the amount of cloud by comparing the reflectance with the observed solar radiation data at the ground. Using this, the solar radiation arriving at the surface can be estimated. This study used the Meteorological Imager (MI) reflectance observed at a wavelength of 675 nm and the Geostationary Ocean Color Imager (GOCI) reflectance observed at similar wavelengths of 660 and 680 nm. Cloudy days during a typhoon and sunny days with little cloud cover were compared using observation data from the geostationary satellite. Pixels that had more than 40% reflectance in the satellite images showed less than 0.3 of the cloud index and blocked more than 70% of the solar energy. Pixels that showed less than 15% reflectance showed more than 0.9 of the cloud index and let through more than 90% of the solar energy to the surface. The calculated daily accumulated solar radiation was compared with the observed daily accumulated solar radiation in 22 observatories of the Korean Meteorological Administration. The values calculated for the COMS and MTSAT MI sensors were smaller than the observation and showed low correlations of 0.94 and 0.93, respectively, which were smaller than the 0.96 correlation coefficient calculated for the GOCI sensor. The RMSEs of MTSAT, COMS MI and GOCI calculation results showed 2.21, 2.09, 2.02 MJ/$m^2$ in order. Comparison of the calculated daily accumulated results from the GOCI sensor with the observed data on the ground gave correlations and RMSEs for cloudy and sunny days of 0.96 and 0.86, and 1.82 MJ/$m^2$ and 2.27 MJ/$m^2$, respectively, indicating a slightly higher correlation for cloudy days. Compared to the meteorological imager, the geostationary ocean color imager in the COMS satellite has limited observation time and observation is not continuous. However, it has the advantage of providing high resolution so that it too can be useful for solar energy analysis.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.1
• /
• pp.49-56
• /
• 2014

In this study, the generation efficiency of the limited area of a concentrator solar cell was increased by using a solar concentrator and a tracking device. Heat generated by the solar cell was collected using a thermal absorber for supplying hot water or heating. Thus, the concentrator solar cell system provided electricity and heat simultaneously. Tracking of the sun by detecting the sun's position, repositioning of heating device towards the east after sunset, and shutting down of system after sunset were successfully implemented using an illuminance sensor (CdS) and Simulink, a commercial software package. We performed parametric analysis of the velocity, fin installation, and entrance location with respect to the operating temperature of the concentrator solar cell. A heat transfer simulation model was developed for comparing the actual temperature profiles of the concentrator solar cell and thermal absorber, and good agreement was found between the results of the simulations and the experiments.