• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.417-419
• /
• 2011

태양전지 모듈은 back sheet, 후면 충진재, 태양전지 cell, 전면 충진재, 전면 보호유리의 구성으로 되어 있다. back sheet는 유리 또는 금속을 사용하는데 사용 재료에 따라 각각 유리봉입방식, 슈퍼스트레이트방식으로 구분된다[1]. 태양전지를 보호하기 위한 충진재는 빛의 투과율 저하가 적은 PVB(Poly Vinyl Butylo)나 내습성이 뛰어난 EVA(Ethylene Vinyl Acetate) 등이 주로 이용된다. 유리봉입방식과 슈퍼스트레이트 방식의 공통점은 모듈 전면에 투과율과 내?충격 강도가 좋은 강화 유리를 사용하는 것이다. 하지만 현재 모듈의 전면 유리는 평탄한 표면 때문에 태양고도가 낮을 때 상대적으로 반사율이 높은 단점을 가지고 있다[2]. 이러한 문제점을 해결하기 위한 방안으로 표면 유리에 요철(anti-glare) 구조를 형성하면 평면 구조의 표면에서 반사되는 태양광이 일부 태양전지 내부로 재입사가 일어나게 되어 표면 반사율이 낮아지게 되고, 이로 인하여 태양전지의 효율이 증가하게 된다. 특히 이러한 효과는 태양고도가 낮아졌을 때 요철(anti-glare) 구조에 의한 반사율의 감소가 증가하기 때문에 평면 구조보다 요철(anti-glare) 구조의 태양전지 모듈 효율이 향상될 것이다. 본 논문에서는 요철(anti-glare) 구조를 만들기 위해서 유리와 평면 구조의 유리에서의 반사율과 투과율을 측정하여 비교 분석하였고, 특히 태양고도의 고도가 변할 때를 비교하기 위하여 반사율 및 투과율을 측정 할 때 입사광의 각도를 변화시켰다. 그리고 태양전지 cell 위에 요철(anti-glare) 구조의 유리와 평명 구조의 유리를 각각 위치시킨 후 태양전지 cell의 효율변화를 확인하였다. 이때 태양전지 cell의 표면은 이방성 식각 용액을 이용하여 역피라미드 구조의 텍스쳐링 태양전지 cell과 평면 구조의 태양전지 cell을 각각 사용하여 비교하였다.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.124-132
• /
• 2012

This study presents the simulation results of Photopia when a lecture room with north-facing windows were illuminated by two different types of daylighting systems to improve the imbalance in its lighting conditions. Especially, the candela power distribution curves (CDCs) on a clear sunny day at the summer solstice, reaching $80^{\circ}$ in solar altitude, were analyzed with respect to the illuminance available at task areas (work planes). The difference between its illuminance on the north and south areas exceeded 1,000 lux without any daylighting system. This, however, decreased drastically with the application of a daylighting system. When a light tube system was introduced, it reduced from 906lx to 603lx and, even further to 308lx with the application of a dish concentrator system. Generally, the performance of a light tube system was greatly influenced by solar altitude while its effect on the dish concentrator system was rather negligible.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.2
• /
• pp.244-255
• /
• 1995

The success of a satellites mission is largely depended upon the choice of an appropriate orbit. In the case of a remote sensing satellite which observes the Earth, there exits an optimum solar elevation angle depending on the mission. Therefore a sun-synchronous orbit is suitable for a remote sensing mission. The second-order theory for secular perturbation due to non-symmetric geopotential was described. To design a sun-synchronous orbit, a constraint condition on regression of node was derived. A algorithm to determine the altitude and the inclination was introduced using this constraint condition. As practical examples, the altitudes and the inclinations of four remote sensing satellites were calculated. The ground tracks obtained by the orbit propagator were used to verify the resulting sun-synchronous orbital elements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4733-4739
• /
• 2012

While traditional two-axis tracking systems with double sensors had been using two sensors to control azimuth and elevation angle of the sun so that a solar cell module would make a normal line with the sun, this paper proposed a new two-axis system that can achieve the same performance with only one sensor in it. It is Two-axis tracking system that control azimuth and elevation to control to be reduced for solar cell module as proposed tracking system uses 1 sensors and the sun always forms normal. Two-axis tracking system of one sensor method that propose in paper that could reduce electric power consumption and sees than fixed type preventing action and the most efficient driving and needless drive could confirm that generation efficiency of about 23 [%] increases. To heighten efficiency of solar cell doing to receive more sunlights chasing the sun, done tracking device have proceeded a lot of studies in large size way. Therefore, is expected that will do big part in the sun tracking supply through utility study about persistent generation efficiency constructing monitoring system of the sun tracking of this paper.

• Journal of IKEEE
• /
• v.15 no.3
• /
• pp.211-217
• /
• 2011

The energy of CPV system is different as the altitude and azimuth of solar. In order to The maximum of solar energy density, the tracking system which does there to make be the module and the solar will be able to maintain a normal line is necessary. This paper proposed for GPS solar tracker of stand-alone 60[W] concentrating photovoltaic system. The position algorithm of solar tracker is through the coordinates transformation calculating the altitude and azimuth of the solar.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.450-453
• /
• 2017

In this abstract, the FPGA system using solar tracking is introduced. Solar tracking system combined with sensor tracking and solar altitude programming is utilized. The sensor tracking system consists of image sensor, light sensor, and the programs for sun altitude received by the computer. The sun altitude is received from the national weather database by wireless communication. The goal is to have maximum energy generation efficiency using bi-directional tracking and mixed tracking with FPGAs that are relatively inexpensive in terms of developing and programming the system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.36-44
• /
• 2009

This paper analyzes efficiency of photovoltaic(PV) tracking system using position solar algorithm(PSA). Solar location tracking system is needed for efficiently and intensively using PV system independent of environmental condition. PV tracking system of program method is presented a high tracking accuracy without the wrong operating in rapidly changing insolation by the clouds and atmospheric condition. Therefore, this paper analyzes efficiency of PV system using PSA algorithm for more correct position tracking of solar. Also, controlled altitude angle and azimuth angle by applied algorithm is compared with data of korea astronomy observatory. And this paper analyzes the tracking error and generation efficiency then proves the validity of applied algorithm.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.66-76
• /
• 2005

In this study, star visibility analysis of a star tracker is performed by using a statistical apprach. The probability of the Sun and the Earth proximity, the solar array masking probability, and the solar array blinding probability by the Sun light are obtained from the arbitrary chosen satellite positions as a function of a line of sight vector of the star tracker in several satellite attitude modes. This analysis demonstrates that the optimized star tracker accomodations can be determined to be an elevation angle -40o and two azimuth angles $-35^{circ}$ and $-150^{circ}$.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.102-102
• /
• 2003

다목적 실용위성 1호로 2000년 6월 28일에서 2001년 8월 1일까지의 고도 685 Km, 22:50LT 지역시(Local Time)인 상부 이온층을 조사하였다. 위성에 탑재된 이온층 측정 센서(Ionospheric Measurement Sensor)로부터 전자 온도와 전자 밀도 데이터를 얻었으며, 자기 위도로 -60$^{\circ}$ ~ +60$^{\circ}$사이의 중ㆍ저위도의 데이터를 분석하였다. 관측 기간은 지자기 변화를 나타내는 Kp index나 태양 활동을 나타내는 F10.7이 크게 변화한 태양 극대기 기간으로, 특히 일변화의 F10.7을 통해 전자 온도와 전자 밀도의 변화를 조사하였다. 측정 시간이 야간(22:50)임에도 불구하고 태양 활동을 나타내는 F10.7에 따라 전자 온도와 전자 밀도가 변화하는 것으로 나타났다. F10.7이 250이하일 때는 F10.7이 커질수록 전자밀도는 거의 선형적으로 증가하였으며 전자온도도 증가는 하나 그 정도는 전자 밀도보다 작게 나타났다. F10.7이 250을 넘어가면 전자 밀도가 일정하거나 감소하는 경향을 나타냈다. 부가적으로 비슷한 고도의 DMSP-F15의 데이터와 비교를 통해 다목적 실용위성 1호의 관측결과의 신뢰성을 높였다.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.2
• /
• pp.37-48
• /
• 2020

This study compares cloud radiation model (CRM) and sunshine fraction radiation model (SFRM) according to the solar altitude using hourly sunshine duration (SD) and cloud cover (CC) data. Solar irradiance measurements are not easy for the expensive measuring equipment and precise measuring technology. The two models with the site fitting and South Korea coefficients have been analyzed for fourteen cities of South Korea during the period (1986-2015) and evaluated using the root mean square error (RMSE) and the mean bias error (MBE). From the comparison of the results, it is found that the SFRM with the site fitting coefficients could be the best method for fourteen locations. It may be concluded that the SFRM models of South Korea coefficients generated in this study may be used reasonably well for calculating the hourly horizontal global irradiance (HGI) at any other location of South Korea.