• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.466-473
• /
• 2011

The purpose of satellite thermal control design is to maintain all the elements of a spacecraft system within their temperature limits for all mission phases. The thermal analysis model for Low Earth Orbit satellite payload level simulation is established by considering thermal vacuum test environment condition, thermal vacuum chamber configuration, and satellite's payload inner thermal environment. The established thermal analysis model is used to determine thermal vacuum test conditions and test case requirements.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.205.1-205.1
• /
• 2012

러시아 발사체 드네프르에 의해 발사될 과학기술위성 3호의 주탑재체 다목적적외선영상시스템, MIRIS (Multipurpose InfraRed Imaging System)는 한국천문연구원에서 주관하여 개발되었다. 그 구성 카메라인 EOC (Earth Observation Camera)는 한반도재난감시를 수행하고, SOC (Space Observation Camera)는 우리 은하 평면의 근적외선 서베이 관측을 통해 $360^{\circ}{\times}6^{\circ}$ Paschen-${\alpha}$ 방출선 지도를 작성하고 I, H 밴드 필터를 이용해서 황도 남북극에 대한 적외선우주배경복사를 관측한다. MIRIS 비행모델이 제작 완료되었고, 그 구성 기기인 SOC, EOC, 전장박스에 대한 최종 우주환경시험을 수행하였다. 과학기술위성 3호의 비행모델 우주환경시험은 진동시험과 열진공시험으로 이뤄지며, 그 시험 규격은 문서에 규정된 Acceptance Level로 수행된다. 충격시험은 공학인증모델을 통해 검증되었다. 열진공시험은 한국천문연구원에서 수행되었으며, 진동시험은 한국과학기술원 인공위성센터에서 수행되었다. 또한 전체 위성이 조립된 후 과학기술위성 3호의 열진공시험은 한국항공우주연구원에서 수행되었다. 이 발표에서는 MIRIS 비행모델에 대한 환경시험과정 및 결과를 보고하고, 과학기술위성이 전체적으로 조립된 후의 MIRIS 진동 및 열진공 시험 결과도 함께 논의한다.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.83-90
• /
• 2002

This paper describes the development of scientific payload system onboard the KSR-III. The ozone detector(UVR), Langmuir electron probe(LEP), airglow photometer(AGP), and magnetometer(MAG) constitute this system. The purpose of the ozone detector is to measure the ozone density profile and the LEP measures the electron density and temperature in the ionosphere over the Korean Peninsula. The AGP detects airglow in the mesosphere over the Korean Peninsular. The MAG provides rocket attitude and the magnetic fluctuation information during the flight. With the developed payloads, the ground calibration tests and the environmental tests have been performed.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.109-114
• /
• 2011

Ka-band payload of COMS (Communication, Ocean and Meteorological Satellite) launched in June 2010 was developed by ETRI with Korean local companies and also the in-orbit test (IOT) for the Ka-band payload was carried out entirely with domestic technology. The Ka-band payload IOT consisted of the antenna pattern measurements and the payload RF performance test was performed during about 40 days from 10 days after the launch. In this paper, the IOT methods and the results for the Ka-band payload are described in detail. According to the comparisons of each IOT test result with the corresponding ground test result, we can show that the Ka-band payload IOT and verification was successfully achieved and that all Ka-band channels of COMS are to be normal.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.40-47
• /
• 2019

This paper proposes the environment construction and test method of system integration laboratory (SIL) and system integration test (SIT) for verification of interface between onboard equipment and ground control equipment of unmanned aerial systems (UAS). This research also describes the interface environment between subsystems built in SIL and verification methods for the systems' operation logic through simulated flights. Similarly, the paper handles the ground integration test process of UAS in the real testing environments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.65-71
• /
• 2005

Pyro-shock measurement system in launch vehicle is necessary to validate structural robustness and to prepare environmental qualification criteria for launch vehicle systems. This paper describes design, development and function test of prototype pyro-shock recorder to be employed on KSLV-I in the near future. Due to the limitation of telemetry transmission rate, pyro-shock recorder acquires and stores the shock sensor data with high sampling rate in short period and sends the data to the KSLV-I telemetry system with lower data rate. Signal conditioning in pyro-shock recorder is designed to enhance signal-to-noise ratio through proper placement of anti-aliasing filter.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.461-466
• /
• 2012

This paper describes the development and test result of X-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels. S-band frequency is used for Telemetry & Command, and X-band frequency is used for mission data. Payload observations data in Mass Memory Unit (MMU) is modulated by QPSK modulator in X-band Transmitter, and then QPSK modulation signal is transmitted to antenna through transfer switch. In this Paper, we described the results of modulation, low-pass filter design, power amp development, and switch test. The FM XTU is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.130-136
• /
• 2002

In this paper, a flight test method is described for the system identification of the unmanned aerial vehicle equipped with an automatic flight control system. Multistep inputs are applied for both longitudinal mode and lateral/directional excitation. Optimal time step for excitation is sought to provide the broad input bandwidth. A programmed mode flight test method provides high-quality flight data for system identification using the flight control computer with the longitudinal and lateral/directional autopilot which enables the separation of each motion during the flight test. In addition, exact actuating input that is almost equivalent to the designed one guarantees the highest input frequency attainable. Several repetitive flight tests were implemented in the calm air in order to extract the consistent system model for the air vehicle. The enhanced airborne data acquisition system endowed the high-quality flight data for the system identification. The flight data were effectively used to the system identification of the unmanned aerial vehicle.

• Bulletin of the Korean Space Science Society
• /
• 2007.10a
• /
• pp.109.1-109.1
• /
• 2007

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.87.3-88
• /
• 2017

한국천문연구원은 차세대소형위성 1호의 근적외선 영상분광기 NISS (Near-infrared Imaging Spectrometer for Star formation history) 탑재체를 개발하여 2017년 6월 30일에 최종 비행모델을 납품하였고, 이 발표는 탑재체 NISS 구조체의 비행모델 개발 결과를 보고한다. NISS는 0.9 - 2.5um (R~20) 근적외선 파장에서 관측을 해야 하기 때문에, 구조체의 배경잡음을 없애기 위해서 200K까지 passive cooling으로 냉각되며, H2RG 검출기는 소형 냉동기에 의해 약 88K에서 운영된다. NISS 구조체의 passive cooling을 효율적으로 수행하기 위해서 방열판, Kevlar 지지대, MLI, 표면제어용 필름 등을 조립하였고, 실제 지상 시험을 통해서 그 성능을 확인하였다. NISS 구조체는 최종 시스템 조립 과정에서 전자부 하네스 조립을 함께 수행했으며, 온도 모니터링 센서를 부착하고 소형 냉동기 피드백 온도를 반복 시험을 통해서 결정하였다. NISS 구조체는 미러 및 렌즈를 지지하는 광기계부를 함께 포함하기 때문에 발사 및 우주환경에서 광학 성능을 유지하기 위한 설계를 거쳐서 제작 되었으며, 최종 시스템 검교정 시험, 진동 및 열진공 시험을 통해서 그 성능을 확인하였다. NISS를 탑재한 차세대소형위성 1호는 2018년 상반기에 미국의 Falcon 9 발사체에 실려서 발사될 예정이다.