• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.117-127
• /
• 2002

In this paper, structure design of the payload section of the KSR-III was performed. The payload section of the KSR-III, which corresponds to the second stage, consists of the Scientific Payload Section for the mission of the rocket, the Payload Section (Electronics) for the communication between the rocket and the ground station, and the Payload Section (Attitude Control) for the attitude control of the rocket. In order to accomplish the mission, every payload and component should operate successfully during the mission period and the structure must satisfy the requirements of the payloads. In this research, precise composition of the payload section and payloads arrangement of the KSR-III were performed. And the modification of the structure to meet the requirements were described.

• Water for future
• /
• v.54 no.11
• /
• pp.25-33
• /
• 2021

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.137-143
• /
• 2002

This paper concerns the spin-stabilization for the second stage of KSR-III(Korea Sounding Rocket-III). The error sources in the second stage are defined, and then the effect on attitude error of KSR-III is analyzed quantitatively and qualitatively. Based on the analysis, some conditions for optimal spinning frequency and optimal steady-spinning duration are suggested. Among several solutions, an optimal value can be determined in the point of minimum impact-point error. An approach to a sub-optimal solution is also suggested. Application to the KSR-III shows that a proper spinning frequency and a steady-spin duration to give the smallest impact-point error can be effectively determined.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.9-16
• /
• 1995

The erection process planning is to decide erection strategy and sequence that satisfies dock duration. The erection scheduling is to decide erection date of each block. The load profile varies according to scheduling and it is related to building cost. It must be possible to simulate the various combinations of process plan and schedule for optimal planning. To develop the process planning system for optimal planning, the system that generate the sequence of erection automatically and the load leveling system are required. This paper suggests the method that generates the erection sequence. The load leveling should be done to all the ships in the same dock batch to get reliable results. In this case since the search space is very large, efficient optimization method is needed Our research achieved the load leveling system using Genetic Algorithm. This system made it possible to simulate various process plans to which schedule is considered.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.71-72
• /
• 2008

과학기술위성3호 부탑재체로 영상분광기(COMIS, Compact Hyperspectral Imager)가 선정되어 2007년 5월부터 개발이 진행되고 있다. COMIS는 2010년 과학기술위성3호에 탑재 발사되어, 위성 궤도 700km 상공에서 해상도 30m을 가지고, 30km 폭의 지표면 또는 대기를 관측할 수 있다. 현재까지 국내에서 개발된 위성탑재 지구관측카메라가 흑백이거나 다분광(3파장)으로 지구관측을 하는 것에 반하여 COMIS는 가시광 및 근적외선 영역에서 16${\sim}$62대역(4${\sim}$15nm 파장 분해능)의 초분광 관측을 수행하게 된다. 초분광 영상은 관측 대상 물성의 상세 구분이 가능한 관계로 군사적 활용을 포함한 원격 탐사의 주요 활용 분야로 대두되고 있다. 본 논문은 과학기술위성3호 부탑재체로 개발되는 영상분광기인 COMIS(Compact Hyperspectral Imager)의 전반적인 개념, 활용 과학을 먼저 소개하고 상세 광학 설계를 발표한다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.224-227
• /
• 2005

KSL V-I 2단 탑재대를 복합재료 샌드위치 구조물로 설계/제작하였다. 축소형 탑재대를 제작하여 진동 특성을 측정하고, 측정된 결과를 이용하여 실물형 탑재대를 설계하였다. 탑재물의 중량을 포함하여 1차 고유진동수가 150 Hz가 되도록 설계하였으며 실제 시제를 제작하여 동특성을 측정하였다.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.60-64
• /
• 2005

STSAT-2 will demonstrate the scientific mission(acquisition of brightness temperature of the earth at 23.8 GHz and 37 GHz) and spacecraft technologies(laser ranging, frame-type satellite structure, Dual-head star tracker, CCD sun sensor, pulsed plasma thruster, etc.). In this paper STSAT-2 satellite system is described. It includes the definition of the system and the overview of payloads and BUS.

• Proceedings of the KSRS Conference
• /
• 2001.03a
• /
• pp.149-153
• /
• 2001

고해상도 카메라가 다목적 실용위성 2호의 탑재체로서 한국항공우주연구원에서 개발되고 있다. 이 카메라에는 Ground sample distance (GSD)가 1m에 달하는 PAN(panchromatic channel)과 GSD 4m인 MS (Multi-Spectral channel)가 있다. 이 목표를 성취하기 위하여 탑재체와 위성체의 요구저건들을 설정하고 그에 따른 설계작업이 현재 진행 중이다. 탑재체는 광학부, 기계부, 전자부, 자료전송부들로 구성되어 있는 데, 각 서브시스템간에 상충되는 점들을 전체 시스템 측면에서 분석, 판단, 조정하고 또한 위성체와의 접속도 원활하게 진행시키고 있다. 실제로 광학 설계, Sun shield 등에서 여러 가지의 설계중에서 최적의 방안을 선택하는 데 시스템 측면에서 고려가 되었었다. 본 논문에서는 이러한 시스템 측면에서의 고해상고 카메라의 요구조건과 기본설계에 대해 발표한다.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.83-90
• /
• 2002

This paper describes the development of scientific payload system onboard the KSR-III. The ozone detector(UVR), Langmuir electron probe(LEP), airglow photometer(AGP), and magnetometer(MAG) constitute this system. The purpose of the ozone detector is to measure the ozone density profile and the LEP measures the electron density and temperature in the ionosphere over the Korean Peninsula. The AGP detects airglow in the mesosphere over the Korean Peninsular. The MAG provides rocket attitude and the magnetic fluctuation information during the flight. With the developed payloads, the ground calibration tests and the environmental tests have been performed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.80-88
• /
• 2003

This paper describes the development of an ozone detector and an electron probe as parts of scientific payloads for sounding rockets such as the KSR-III. Each detector consists of sensor parts and electronic parts. We successfully carried out the calibration tests with developed ozone detector and the space plasma simulation chamber tests with electron detector. These payloads could be onboard the KSR-III and with measured data, it is expected and temperature profile over the Korean Peninsular.