• Korean Journal of Food Science and Technology
• /
• v.22 no.5
• /
• pp.530-532
• /
• 1990

The moisture sorption behaviors of dry corn(DC). dry-corn (DCC) and soaked-rooked corn(SCC) at $25^{\circ}C$ were analyzed. The corn was soaked in water at $26^{\circ}C$ for 8hr. The cooking times for DCC and SCC were 30 and 20min. respectively, at $80^{\circ}C$. Desorption occurred for DC and DCC at RH below 23% and SCC at RH below 33% during storage. Moldiness was observed in all samples at RH 97%, after 192hr for DC and 288 hr for both DCC and SCC. At the same water activity. SCC sample had the highest moisture content, followed by DC. The SCC sample had the highest monolaver value and sorption heat. Stability isotherms indicated that DC and SCC had better storability than DCC.

• Korean Journal of Food Science and Technology
• /
• v.19 no.4
• /
• pp.331-337
• /
• 1987

The sorption characteristics of pearled, cutted and pressed barleys stored for 360 hours at $20^{\circ}C$ and various relative humidites were analyzed. The adsorption rate at RH above 57% was the greatest in pearled barley and the lowest in cutted barley. The desorption rate at RH below 44% was in the decreasing order of pearled, pressed and cutted barleys. From the sorption rates an empirical equation was proposed. which can be used for the estimation of moisture content of three barleys at arbitrary storage time and RH.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.460-468
• /
• 1985

Changes in intrumental and sensory Theological parameters of chewing gum during storage were stuided. Texture changes are influenced to the great extent by moisture content of stored chewing gum and D.E. of cornsyrup, meanwhile content of cornsyrup, process condition and storage temperature had a little effect on texture change. Highly significant correlation was observed between logarithmic instrumental texture parameters of deformation, bending and puncture test and logarithmic moisture content. And also good correlations were observed between each sensory and instrumental texture parameters. The optimum texture values were estimated by regression analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.497-504
• /
• 2009

The characteristic changes in weight, moisture content, and dimension at the early adsorptiondesorption stage of PEG-treated Korean pine (Pinus koraiensis), Japanese larch (Larix kaempferi), mongolian oak (Quercus mongolica) and sargent cherry (Prunus sargentii) woods were investigated. The wood samples were treated with PEG 1000, 2000 and 4000, and conditioned at the relative 98%, 65% and 20% for humidities of one week. The weight of Korean pine, Japanese larch and sargent cherry woods treated with PEG 1000 and 2000 during the adsorption-desorption was significantly changed, but mongolian oak was slightly changed. Moisture content was highly Moisture content was highly fluctuated by the change of relative humidity in the three species except oak wood. Although the weight of PEG-treated wood; however, changes in dimension could be prevented by PEG treatment in all species tested.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.14-17
• /
• 1990

Seven varieties of soybeans(Paldal, Danyeob, Jangbaek, Baegun, Jangyeob and 2 cultivars of Local 1 and Local 2) were investigated to compare the sorption characteristics during storage of various relative humidities. The sorption isotherm curve determined at RH range of $33{\sim}92\;%$ and $4^{\circ}C$ and $25^{\circ}C$ showed that moisture contents of soybeans was higher at $4^{\circ}C$ than those values at $25^{\circ}C$ for overall water activities of 0.33{\sim}0.92$. The Paldal was the highest moisture content at $4^{\circ}C$ while that value of Baegun was the highest at $25^{\circ}C$. The change in moisture content with storage time was expressed by log(dw/dt)=b log(t)+log a and the value of (dw/dt)${\times}10^3$ was decreased logarithmically. The Paldal was comparatively the highest initial absorption rate and the value of -b in seven varieties decreased as the relative humidity increased from 33 % to 92 %.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.4
• /
• pp.398-402
• /
• 1989

Moisture sorption and cooking properties of two varieties of Korean soybean(Jangyup and Whangkeum) were studied. When soybean was stored under the various relative humidities (RH) of 33-86% at 16'E for 125hours, its sorption behaviors were divided into two : desorption at the RHs of 33 and 44% and adsorption at the RHs of above 55%. The sorption rate was decreased rapidly during storage. In comparisons with only storage humidities, the sample stored at higher RH held the higher sorption rate. The relationships between storage time and sorption rate were applied well to the equation, log dw/dt= b log t+ log a, where w is the moisture content(%, db), t is time(hour) and a and b are the parameters which were calculated from the experimental data. The calculated moisture contents from the equation agreed well with the measured moisture contents. On the other hand, the cooking degrees of soybean which was steamed in an autoclave at $106-121^{\circ}C$ were compared by the maximum cutting forces. The cooking time to attain the same degree of cooking decreased logarithmically as the cooking temperature increased. The z-values which were calculated from the time-temperature combinations that gave the same degree of cooking for Jangyup and Whangkeum were $13.3^{\circ}C$ and $12.8^{\circ}C$ respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.1
• /
• pp.25-30
• /
• 1982

To evaluate the quality of commercial dehydrated tea-products, the relationships between particle sizes, densities, moisture absorption & desorption and color appearance were studied by using Hunter-lab tristimulus colorimeter and spectrophotometer. Among the tea-products was held no significant relation between particle sizes and color appearance but red ginseng extract powder (RGEP) was included L, a and b values when was reduced particle size. appearance color of tea-products indicated red-orange color, L, a and b values were ranged 32.7 to 48.0, 4.0 to 10.0 and 5.6 to 18.0, respectively, densities of tea-products ranged 0.232 to 0.898 g/ml and increased L values, Hunter's a/b ratio values was included in 0.61 to 0.90. Color stability in this products was well agreed with decrease of total color difference value ($\Delta$E) and chromaticity difference value ($\Delta$C) of the Hunter-lab color data.

• Korean Journal of Food Science and Technology
• /
• v.17 no.2
• /
• pp.114-120
• /
• 1985

This study was carried out to investigate the storage stability of Yackwa (a Korean fried cake made from wheat flour, honey and 20% oil), with the variation in frying oils (soybean oil of fresh or heat-treated corn oil and rapeseed oil) and storage conditions (temperature, humidity and in dark or under fluorescent light) for 20 weeks period. In $5^{\circ}C$ storage, acid and peroxide values increased slowly, showing the peroxide value of 20 meq/kg after 13 weeks. In $40^{\circ}C$ storage, acid and peroxide values increased remarkably. The product became harder at storage humidity of 25% and softer by moistening at storage humidity of 80%. Acid and peroxide values of Yackwa from corn, rapeseed and soybean oils increased with storage period, to a different extent. The values of fluorescent groups, especially rapeseed oil group, were higher than those of control groups and the heat-treated oil groups were higher than those of fresh oil groups. Sensory scores for rancid flavor were gradually increased with the storage period in all groups. There was no significant difference with the kinds of frying oils, storage conditions and heat treatment. Correlation of sensory scores with acid values was positive throughout whole storage period, with low ${\gamma}-values$. Its correlation with peroxide values was positive up to 6th week but negative at 9th week of storage.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.593-598
• /
• 2013

In this study, we have evaluated the water absorption phenomenon of photoresist dry film, which is commonly used to build circuits on PCB (Printed Circuit Board) by photolithography, by using ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared). We have firstly observed significant change in fracture mode of dry film with respect to temperature and humidity, which we assumed the material transition from ductile to brittle. Secondly, we have established the process of absorption test for determining the diffusion coefficients of water into the dry film both with gravimeter and ATR-FTIR. We have successfully calculated the diffusion coefficients for each environmental conditions from the results which we achieved by gravimeter and ATR-FTIR. Compared to the gravimeter which is a conventional method for absorption test, the ATR-FTIR method in this study has been found to be very easy to use and have the same accuracy as gravimeter. Moreover, we are expecting to use the ATR-FTIR as an appropriate method to study the absorption phenomena related to any kinds of solvent and polymer system.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.117-121
• /
• 1992

The changes in sensory and mechanical texture of chewing gum during storage at various relative humidity were studied to define the quality index for the prediction of shelf-life. The initial moisture content of chewing gum was 2.57% (dry basis). The BET monolayer value at $a_{w}$ 0.19 was calculated to be 1.57% (dry basis). The sensory scores of chewing gum were closely correlated with moisture content and instrumental texture parameters with 0.1% significant level. Therefore the quality of stored chewing gum was directly related with moisture content above BET monolayer. The products became organoleptically acceptable in the range of moisture content $2.17{\sim}3.16%(dry basis)$. This range of moisture content ie equivalent to the ranges of instrumental parameter, fracture force$0.8{\sim}1.8{\times}10^{7}$, fracture modulus $1.1{\sim}2.4{\times}10^{8}$, puncture force $0.5{\sim}1.1{\times}10^{7}[dyne/cm^{2}]$ and brittleness $0.7{\sim}1.4{\times}10^{8}[dyne/cm^{3}]$, respectively.