• Applied Microscopy
• /
• v.1 no.1
• /
• pp.35-42
• /
• 1969

가토간장에서 채취(採取)한 간(肝)디스토마 성충(成蟲)의 정소(精巢)와 수정낭(受精囊)을 1.25% glutaraldehyde와 1% 사산화(四酸化) 오스뮴산(酸)으로 냉실(冷室)에서 이중고정(二重固定)하였다. 고정(固定)된 시료(試料)는 양식(樣式)에 따라 탈수(脫水)한 후(後) Epon-812로 포매(包埋)하여 MT-2형(型) Porter Blum microtome으로서 초박절편(超薄切片)을 만들어 수사화연(水酸化鉛)과 초산(醋酸)우라닐로서 이중염색(二重染色)한후 Hitachi HS-7형(型)과 HU-11E형(型)의 전자현미경(電子顯微鏡)으로 관찰(觀察)하였다. 관찰결과 간(肝)디스토마의 정세포(精細胞)는 타원형으로 난형(卵形)의 인(仁)을 포함(包含)한 큰 핵(核)을 갖고 있으며 핵(核)을 둘러싼 비교적소량(比較的小量)의 세포질(細胞質)에는 낭형(囊形)의 조면소포체(粗面小胞體)가 희소(稀少)하게 있으며 유리(遊離)리보좀 및 즐(櫛)을 가진 미토콘드리아, 중심체(中心體), 층판상(層板狀)의 골지체가 있다. 정자(精子)는 긴 원주형(圓柱形)의 핵(核)과 선단(先端)에 첨체(尖體)를 포함(包含)한 두부(頭部)와 중종편(中終片), 미부(尾部)의 말단부(末端部)로 갈수록 점차 가늘어져서 결국(結局) 편모(鞭毛)로 끝난다. 두부(頭部)의 선단부(先端部) 가까이 핵환(核環)이 있으므로 이를 기시점(起始點)으로 직경(直徑) $250{\AA}$ 정도의 $8{\sim}10$개(個)의 미세소관(微細小管)이 축사(軸絲)의 배면(背面) 원형질막(原形質膜) 직내면(直內面)의 외형질(外形質)에 평행(平行)하게 중종편(中終片)까지 신장(伸長)되어 있다. 미토콘드리아는 융합(融合)되어 두부(頭部)의 후반부(後半部) 핵(核)의 복측(腹側)에 평행(平行)하게 축사(軸絲)를 감싸는 원추형(圓錐形)으로 종단면(縱斷面)에서 반점상(班點狀)의 횡문(橫紋)이 관찰(觀察)되었다. 중심체(中心體)에서 기원(起原)된 축사(軸絲)는 중심부(中心部)에 중심섬유(中心纖維)와 중심초 및 이중(二重)의 미세소관(微細小管)이 9개(個) 둘러싸고 있는 구조(構造)를 하고 있다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.108-108
• /
• 2011

PLA 즉 폴리유산섬유는 옥수수를 발효하여 글루코오스(포도당)상태를 만든 후 젖산(유산, Lactic acid)으로 만들고 이것을 탈수, 축합반응시켜 polylactic acid로 만든 것이다. 생분해성이 있으므로 저탄소, 녹색성장의 모토를 대변하는 소재라는 이점이 있다. 구조는 에스테르기의 반복단위를 가지는 소수성 섬유로 벤젠환은 없으나 그 외 구조는 폴리에스테르와 비슷하며, 에스테르기가 존재하므로 분산염료와 수소결합하여 염착된다. 그러나 PLA는 융점이 $170^{\circ}C$, Tg $57^{\circ}C$로 내열성이 낮아서 염색온도, 열처리온도, 다림질에 제약이 있으며, 알칼리에 약한 단점이 있다. 따라서 PLA섬유는 낮은 염착량, 내알칼리성, 염착온도 때문에 염색 및 후가공 단계에 많은 사전 실험을 통한 조건 설정이 필요한 까다로운 섬유이다. 본 연구에서는 (주)휴비스의 PLA원사로 제직한 직물(경사:DTY 75/72SD, 위사:DTY 100/72SD, 조직:DOBBY) 생지에 대하여 열처리 시 장력의 유무, 온도, 시간에 따른 폭의 변화를 측정하여 수축률을 알아보았다. 또한, PLA직물을 온도별로 정련한 후 열처리하여 인열강도 측정을 통해 최적 전처리 조건을 조사하였다. 실험결과, PLA생지를 무장력 상태에서 열처리 시 수축이 심하게 일어나고, 장력이 주어져도 열처리 온도에 따라 수축의 정도에 차이가 나타났다. 열처리 시간은 30, 60, 90, 120초로 주었으나 큰 편차는 없었고, 경사가 위사보다 수축 정도가 더 컸으며, $130^{\circ}C$에서는 전체적으로 수축이 심하였다. 생지의 정련에는 인산에스테르계 정련제와 약알칼리인 탄산나트륨으로 조액하여 60, 70, 80, $90^{\circ}C$에서 10분간 처리한 후, Lab. tenter(Mathis, LTE)를 이용하여 110, 120, $130^{\circ}C$에서 30, 60, 90, 120초간 열처리한 다음, KS K 0535 펜듈럼법에 의거하여 인열강도를 측정하였다. 그 결과, 상기 정련온도에서는 인열강도에 영향을 주지 않았으나, 열처리 온도가 $130^{\circ}C$일 때 현저한 강도의 저하를 나타내었다. 실험조건 하에서 가장 적절한 열처리 조건은 $110^{\circ}C$, 60초로 사료된다. 따라서 PLA의 약한 내열성과 내알칼리성 실험결과, 강도나 수축 등 물성변화가 일어나지 않도록 열처리 온도의 제어에 주의가 필요함을 확인할 수 있었다. 실제 섬유가공 작업현장에서는 일반적으로 열처리기가 $180^{\circ}C$이상의 고온으로 고정된 경우가 많은데, 작업자들에게 PLA소재에 대한 사전주의 및 공정변경에 대한 주지가 요구된다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.545-553
• /
• 2003

To achieve good dentin bonding, we must obtain proper wet dentin surface. The purpose of this study was to compare dentin surface according to different wetness degree by AFM image as studying how to obtaining proper wet dentin surface. Intact recently extracted primary teeth were used in the study. The extracted teeth were stored in distilled water at $4^{\circ}C$ until prepared. The teeth were used to prepare 1mm thick dentin disks with exposed surfaces parallel to the occlusal surfaces. The surface of the dentin were polished with polishing disk. The sample were ultrasonically cleaned with distilled water. The sample of each group were treated by different ways. We compared dentin surface of each group by AFM image. From the experiment, the following results were obtained. 1. Acid etching in the dentin surface of primary teeth, resulted in the removal of the smear layer, which opened dentinal tubules, caused the demineralization of peritubular and intertubular dentin, and exposed a collagen-rich transition zone. 2. If the etched dentin was so dehydrated, the intertubular dentin surfaces deceased in height and the diameters of the dentinal tubules decreased slightly. 3. In the group dried with compressed air for 20 seconds at 2 cm, the dentin surfaces were too excessive dried and dehydrated. 4. In the group dried with compressed air for 3 seconds at 2 cm, dry cotton, wet cotton, microbrush and absorbent tissue paper, the dentin surfaces were properly wet.

• Journal of Food Hygiene and Safety
• /
• v.27 no.2
• /
• pp.117-126
• /
• 2012

This study was conducted to assess the levels of microbiological hazards of preprocessed Namuls, which were served at the school foodservice. 19 preprocessed ground or root vegetables were collected from 21 schools in May to June of 2011. Heavy contamination of aerobic plate counts (from 3.39 to 8.42 logCFU/g) and total coliform groups (from 3.16 to 7.84 logCFU/g), enterobacteriaceaes (from 2.53 to 7.55 logCFU/g) were detected in preprocessed Namuls. In addition, the detection rates of Escherichia coli, Staphylococcus aureus and Bacillus cereus (emetic form) were 4.3%, 11.7% and 2.1%, respectively. In addition, sanitary indicative bacterium at preprocessing steps of root vegetables (lotus root, burdock root, bellflower root) and blanched Namuls (bracken, sweet potato vine, chinamul) were analyzed. Aerobic plate counts, coliform groups, and enterobacteriaceaes were not effectively removed during preprocessing including washing and soaking steps. In the case of blanched Namuls (bracken, sweet potato vine, chinamul), contamination levels increased more after drying process and no significant reduction effect on the levels of microbial contamination was observed during preprocessing steps. Thus, effect of preprocessing steps on the microbiological hazards in Namuls must be reevaluated to improve the microbiological quality of preprocessed Namuls at the school foodservice and retail markets.

• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.12-17
• /
• 2017

We construct 3D SV-wave velocity structure of the crust and the upper mantle beneath East Asia from Rayleighwave group-velocity measurements. For the construction of the SV-wave velocity model at 10 ~ 100 km depth, we used seismic data recorded at 321 broadband stations in Korea, Japan, and China. Rayleigh-wave group-velocity dispersion curves were obtained by using the multiple filtering technique in the period range from 3 to 150 s. High SV-velocity anomalies are imaged beneath the East Sea from 10 km depth to deeper depth, implying that the Moho beneath the East Sea is between at 10 ~ 20 km depth. We estimated the Moho beneath the Korean peninsula to be around 35 km based on the depth where a high-velocity anomaly is observed. The SV-wave velocity model shows prominent fast S-velocity anomalies near northeastern Japan, associated with the subducting Pacific plate. Low-velocity anomalies are found beneath the east coast of the Korean peninsula at 100 km depth, which may play a role in the formation of the Ulleungdo and the Ulleung basin. We observed low-velocity anomalies beneath the Yamato basin at 100 km depth as well, which may indicate the upwelling of fluid from the Pacific plate via dehydration at deeper depth.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.12 no.1
• /
• pp.49-53
• /
• 2012

X-linked adrenoleukodystrophy (ALD) is a rare inherited metabolic disease which results in impaired peroxisomal ${\beta}$-oxidation and the accumulation of very long chain fatty acids (VLCFA) in the adrenal cortex, the myelin of the central nervous system, and the testes. X-linked ALD is caused by mutations in the ABCD1 gene encoding an ATP-binding cassette transporter superfamily located in the peroxisomal membrane. This disease is characterized by a variety of phenotypes. The classic childhood cerebral ALD is a rapidly progressive demyelinating condition affecting the cerebral white matter before the age of 10 years in boys. We report the case of a 8-year-old with childhood cerebral X-linked ALD who developed inattention, hyperactivity, motor incoordination and hemiparesis. We diagnosed ALD with elevated plasma very long chain fatty acid level and diffuse high signal intensity lesions in both parieto-occipital white matter and cerebellar white matter in brain MRI. We identified a novel c.983delT (p.Met329CysfsX7) mutation of the ABCD1 gene. There is no correlation between X-ALD phenotype and mutations in the ABCD1 gene. Further studies for searching additional non-genetic factor which determine the phenotypic variation will be needed.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.271-278
• /
• 2023

In the present study, A356 melt degassing experiments were conducted under various impeller rotation speed and inert gas flow rate conditions to determine changes in the melt temperature, composition and density during a degassing treatment. The melt temperature was found to decrease gradually as the degassing time increased, but a clear correlation between the impeller rotation speed or inert gas flow rate and the melt heat loss could not be confirmed. Regardless of the impeller rotation speed or inert gas flow rate, the Mg and Ti contents in the A356 melt scarcely changed, even after degassing for more than 10 minutes, while Sr contents decreased at the maximum degassing rate of 70 ppm. From a quantitative analysis of the degassing rate under each experimental condition based on the hydrogen concentration in the melt derived from the melt density and the degassing model equation, the inert gas flow rate was found to affect the degassing rate rather than the impeller rotation speed under the degassing operation condition employed in the present study.

• Journal of Gastric Cancer
• /
• v.8 no.3
• /
• pp.120-128
• /
• 2008

Purpose: Mistletoe extract was widely used for cancer treatment as complementary or alternative therapy in European area from early twenty century. It is currently used as alternative anti-cancer remedy by piecemeal in domestic medical group, however, the anti-cancer mechanism of mistletoe extract was not known precisely until now. In this study the effect of mistletoe extract on gastric cancer was studied vis cell line experiments. Materials and Methods: The SNU719 gastric cancer cell line was used, and ABNOBAviscum-Q and ABNOBAviscum-F were treated to cells as mistletoe extract, or 5-FU and cisplatin were used with mistletoe extract. The cell viability and cell death rate were estimated by CCK-8 assay kit and lactate dehydrogenase (LDH) assay kit in each. Caspase 3 assay kit was used to measure caspase 3 activity. The protein expression amounts of Bcl2, p53, and PTEN were estimated through Western blot analysis. Results: The co-treatments of mistletoe extract Q/F and 5-FU/cisplatin decreased lesser cell viability than only mistletoe treat. Caspase 3 activity was increased 4~6 times in co-treatment of mistletoe extracts and 5-FU than control. Bcl2 protein expression was reduced by mistletoe extracts or anti-cancer drugs, further more, the co-treatment of mistletoe extracts and 5-FU/cisplatin diminished more the expression than only mistletoe treatment. Mistletoe extracts did not affect the protein expressions of p53 and PTEN. Conclusion: It was concluded that the anti-cancer mechanism of mistletoe extracts was made by caspase 3 activation and lowered Bcl2 expression, and this apoptosis inducing mechanism was independent to p53.