• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.331-344
• /
• 2022

This study analyzed the characteristics of the soil and hydrological environment of abandoned paddy wetlands examined the changes in land cover type in the ecological affect area, analyzed the environmental factors of abandoned paddy wetlands, and examined the changes in land cover type in the ecological impact area. The ecological environment characteristics of the reference abandoned paddy wetlands were investigated through literature research, environmental spatial information service, and preliminary exploration of the abandoned paddy wetlands, and the basic data for the restoration of abandoned paddy wetlands ware provided by examining the changes in land cover type in the ecological impact area for 40 years. Through this study, it will be possible to manage the rapidly increasing number of abandoned farmland to be converted into wetlands so that it can perform functions equivalent to or greater than that of natural wetlands. In particular, as we checked the clues that abandoned paddy wetlands could spread to surrounding ecological influences through land cover changes, the study sites are highly likely to be reference wetlands, and if the topography, soil, water circulation system, and carbon reduction performance are analyzed carefully, it will be possible to standardize the development process. In addition, through the change in land cover, clues were confirmed that the abandoned paddy wetlands could spread to the surrounding ecological affect areas. The land cover type in the ecological impact area, forests was mainly distributed, but generally decreased rapidly in the last 10-20 years, and forests were changing from coniferous forests to broad-leaved forests, mixed forests, or grassland. It has not yet been fully called to the wetland, and it is found that it has maintained the form of barren or grassland, and as can be seen in the case of natural wetlands after more than 30 years after abandoned, it is expected that the transition will gradually proceed to wetlands that are structurally and functionally similar to natural wetlands.

• Korean Journal of Environmental Biology
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2016

As the deforestation in North Korea gets severed, the interest for REDD+ is also increasing. This study analyzed historical land cover changes of the study area which is 10,000 ha in Hwanghaebukdo of North Korea for assessing change in landcover and carbon storage. The result showed that the forest area had decreased from 7,035 ha to 4,293 ha which is approximately 39% of total forest area between 1989 and 2013. The deforestation caused that forest carbon storage had decreased approximately $284,399tCO_2$. Set the baseline and analysed the potential reduction amount of carbon emission, it was estimated that REDD+ project could store approximately $364,704tCO_2$ for next 30 years. This study still has limitations such as lacking in direct field survey and the data of stand volume of each tree species which was replaced with the data of stand volume in South Korea. But, study can be applied for future REDD+ projects in North Korea.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.785-799
• /
• 2022

The aim of this study was to characterize the emission pathways and the footprint of greenhouse gases (GHG) in Daecheong Reservoir using the G-res Tool, and to evaluate the GHG emission intensity (EI) compared to other energy sources. In addition, the change in GHG emissions was assessed in response to the total phosphorus (TP) concentration. The GHG flux in post-impoundment was found to be 262 gCO₂eq/m²/yr, of which CO₂ and CH₄ were 45.7% and 54.2%, respectively. Diffusion of CO₂ contributed the most, followed by diffusion, degassing, and bubbling of CH₄. The net GHG flux increased to 510 gCO₂eq/m²/yr because the forest (as CO₂ sink) was lost after dam construction. The EI of Daecheong Reservoir was 86.8 gCO₂eq/kWh, which is 3.7 times higher than the global EI of hydroelectric power, due to its low power density. However, it was remarkable to highlight the value to be 9.5 times less than that of coal, a fossil fuel. We also found that a decrease in TP concentration in the reservoir leads to a decrease in GHG emissions. The results can be used to improve understanding of the GHG emission characteristics and to reduce uncertainty of the national GHG inventory of dam reservoirs.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_3
• /
• pp.1721-1730
• /
• 2023

As awareness of the problem of global warming emerges around the world, the role of carbon sinks in settlement is increasingly emphasized to achieve carbon neutrality in urban areas. In order to manage carbon sinks in settlement, it is necessary to identify the current status of carbon sinks. Identifying the status of carbon sinks requires a lot of manpower and time and a corresponding budget. Therefore, in this study, a map predicting the location of trees was created using already established tree location information and Sentinel-2 satellite images targeting Seoul. To this end, after constructing a tree presence/absence dataset, structured data was generated using 16 types of vegetation indices information constructed from satellite images. After learning this by applying the Extreme Gradient Boosting (XGBoost) model, a tree prediction map was created. Afterward, the correlation between independent and dependent variables was investigated in model learning using the Shapely value of Shapley Additive exPlanations(SHAP). A comparative analysis was performed between maps produced for local parts of Seoul and sub-categorized land cover maps. In the case of the tree prediction model produced in this study, it was confirmed that even hard-to-detect street trees around the main street were predicted as trees.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.846-852
• /
• 2001

A two-dimensional Monte Carlo simulation has been used to investigate the effect of the reaction temperature on the formation of the silicon carbide conversion layer near the surface of graphite substrate The carbothermal reduction of silica is the reaction mechanism of silicon carbide formation on graphite substrate by chemical vapor reaction methods. The chemical composition of silicon carbide conversion layer gradually changes from carbon to silicon carbide because gaseous reactants diffuse through micropores within graphite substrate and react with carbon at the surface of inner pores. The simulation was carried out under the condition of reaction temperature at 1900K, 2000K, 2100K and 2200K for 500MCS. It was found from the results of simulation that the thickness of silicon carbide conversion layer increases with reaction temperature.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.180-186
• /
• 2005

This paper discusses the development of mixtures for silica fume as a stabilization/solidification agent and a binder for industrial wastewater residue containing organic and heavy metal contaminants. The UCS (unconfined compressive strength) gradually increased to 66.7% as the silica fume content increased to 15%. The leaching of TOC (total organic carbon) and chromium decreased as more OPC (Ordinary Portland Cement) was substituted with the silica fume. When a mixture had 5% silica fume, it retained about 85% TOC, and chromium leached out 0.76 mg-Cr/g-Cr in acidic solution. Also, microstructural studies of the solidified analysis showed that the silica fume caused an inhibition to the ettringite formation which did not contrilbute to setting but coated the cement particles and retarded the setting reactions. The results indicated that the incorporation of silica fume into the cement matrix minimized the detrimental effects of organic materials on the cement hydration reaction and the contaminant leachability.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.3
• /
• pp.77-82
• /
• 2014

In this study, we carried out the interrupted cutting of carbon steel for a machine structure (SM45C) with a CVD-coated tool and conducted an ANOVA test and a confidence interval analysis to find factors influence the surface roughness and to obtain a regression equation. We found that factor which mostly affects the surface roughness during interrupted cutting was the feed rate. The cutting speed and depth of the cut only had small effect on the surface roughness. From the result of a multi-regression analysis during an interrupted cutting experiment, we obtained regression equation. Its coefficient of determination was 0.918, indicating that the regression equation was predictable. Compared to continuous cutting, if the feed rate increases, the surface roughness will also increase during interrupted cutting.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.40-45
• /
• 2016

Interrupted cutting has different cutting characteristics compared with continuous cutting. In interrupted cutting, the workpiece has a groove that regularly impacts the cutting tool and workpiece. Therefore, tool damage occurs rapidly, and this increases the cutting force and surface roughness. In this study, we performed interrupted cutting of carbon steel for machine structure (SM45C) using a coated carbide tool (TT7100). To predict the cutting force, we analyzed the experimental results with a regression analysis. The results were as follows: We confirmed that the factors affecting the principal force and radial force were cutting speed, depth of cut, and feed rate. From the multi-regression analysis, we deduced regression equations, and their coefficients of determination were 89.6, 89.27, and 28.27 for the principal, radial, and feed forces, respectively. This means that the regression equations were significant for the principal and radial forces but not for the feed force.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.446-450
• /
• 2013

TRISO coated particles with a ZrC barrier layer were fabricated by a fluidized-bed chemical vapor deposition (FBCVD) method for a use in a very high temperature gas-cooled reactor (VHTR). The ZrC layer was deposited by the reaction between $ZrCl_4$ and $CH_4$ gases at $1500^{\circ}C$ in an $Ar+H_2$ mixture gas. The amount of free carbon codeposited with in ZrC was changed by controlling the dilution gas ratio. Near-stoichiometric ZrC phase was also deposited when an impeller was employed to a $ZrCl_4$ vaporizer which effectively inhibited the agglomeration of $ZrCl_4$ powders during the deposition process. A near-stoichiometric ZrC coating layer had smooth surface while ZrC containing the free carbon had rough surface with tumulose structure. Surface roughness of ZrC increased further as the amount of free carbon increased.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.236-245
• /
• 2021

It is very important for structure designer to understand the service life variation since a wide range of service life is evaluated with changing exposure conditions and design parameters. Recently, for zero-carbon, waste plastic has been used for fuel for clinker production and this yields increase in chloride content in cement. This study is for evaluation of changing service life in the concrete with increasing initial chloride content due to usage of plastic-SRF(Solid Refuse Fuel) considering various exposure conditions and design parameters. For this, 4 levels of initial chloride content were assumed, and the service life was assessed using LIFE 365 program considering various environmental conditions including 3 levels of surface chloride content. As for analysis parameters, critical/initial chloride content, blast furnace slag powder replacement ratio, W/B(Water to Binder) ratio, cover depth, and unit mass for binder are adopted. Service life decreases with increasing initial chloride content and a significant reduction of service life is not evaluated permitting up to 1,000ppm of initial chloride content. With increasing slag replacement ratio, a longer service life can be secured since blast furnace slag powder has the effect of reducing the diffusion of external chloride ions and fixing the free chloride. It is thought that increasing initial chloride content up to European standard is helpful for enhancing sustainability and reducing carbon emission. Though the reduction in service life due to an increase in the initial chloride content is not significant in slag-concrete with low surface chloride content, careful consideration for mixing design should be paid for the exposure environment with high surface chloride content.