• Title/Summary/Keyword: 탄소분포

Search Result 699, Processing Time 0.028 seconds

Density Profile Evaluation of Needle-punched Carbon/Carbon Composites Nozzle Throat by the Computed Tomography (전산화 단층촬영에 의한 니들펀칭 탄소/탄소 복합재료 노즐 목삽입재의 밀도 분포 평가)

  • Kim Dong-Ryun;Yun Nam-Gyun;Lee Jin-Yong
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.10 no.1
    • /
    • pp.44-53
    • /
    • 2006
  • In this study, the non-destructive computed tomography was adopted to observe the density profile of the needle-punched Carbon/Carbon(C/C) composites nozzle throat. The density profile of C/C was evaluated within ${\pm}0.01g/cm^3$ with 98.74% confidence when the correction of the image and high signal-to-noise ratio were achieved by the optimization of the beam hardening, the electrical noise and the scattered X-ray. The density variation of C/C with the computed tomography was in good agreement with the results obtained by the water immersion method and the observation with scanning electron microscope.

Density Profile Measurement of Needle-punched Carbon/Carbon Nozzle Throat by the Analysis of Computed Tomography Image (전산화 단층촬영 영상 분석에 의한 탄소/탄소 목삽입재의 밀도 분포 측정)

  • Kim Dong-Ryun;Yun Nam-Gyun;Lee Jin-Yong
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2005.11a
    • /
    • pp.469-474
    • /
    • 2005
  • Tn this study, the noll-destructive computed X-ray tomography was adopted to observe the density distribution of the needle-punched C-C composites nozzle throat. The density distribution of the C-C was evaluated within ${\pm}0.01g/cm^3$ with 98.74% confidence when the correction of the image and high signal-to-noise ratio were achieved by the optimization of the beam hardening, the electrical noise and the scattered X-ray. The density variation of the C/C with the computed tomography was in good agreement with the results obtained by the water immersion method and the observation with scanning electron microscope.

  • PDF

Thermo-Elastoplastic Analysis of Ni/Al$_2$O$_3$Heat-Resisting Functionally Graded Composites (Ni/Al$_2$O$_3$기능경사 내열복합재의 열-탄소성 해석)

  • 조진래;김병국;하대율
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.14 no.1
    • /
    • pp.11-19
    • /
    • 2001
  • 기능경사재(FGM)는 구성 물질의 체적분율(volume fraction)이 복합재 전체에 걸쳐 연속적 그리고 기능적으로 분포되어 있어, 기존의 이종물질 접합식(bi-material-type) 복합재보다 현저히 우수한 열기계적 특성을 가진다. 하지만, 기능경사 내열복합재의 열-탄소성 거동은 체적분율의 분포형태와 경사층이 차지하는 상대두께비에 따라 절대적으로 좌우된다. 본 연구는 기능경사 내열복합재의 열-탄소성 특성의 이들 두 설계인자에 대한 파라메트릭 FEM해석을 다룬 것이다. 열-탄소성 이론과 유한요소 근사화에 따라 연구용 2차원 FEM 프로그램을 개발하고, 대표적인 3층 구조의 2차원 기능경사 내열복합재의 열-탄소성 특성을 설계변수의 다양한 조합에 따라 분석하였다.

  • PDF

Synthesis of Single-walled Carbon Nanotubes with a Narrow Diameter Distribution via Size-controlled Iron Oxide Nanoparticle Catalyst

  • Kim, Seong-Hwan;Song, U-Seok;Kim, Yu-Seok;Lee, Su-Il;Park, Jong-Yun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.568-568
    • /
    • 2012
  • 뛰어난 물리적, 전기적 특성을 가진 단일벽 탄소나노튜브는 여러 분야에서 응용 가능성이 매우 높은 물질이다. 그러나 단일벽 탄소나노튜브의 전기적 특성은 나노튜브의 직경과 카이랄리티(chirality)에 매우 강하게 의존되기 때문에 균일한 직경과 카이랄리티를 갖는 단일벽 탄소나노 튜브만의 사용은 나노튜브 기반의 전자소자 응용에서 매우 중요하다. 균일한 직경과 카이랄리티의 단일벽 탄소나노튜브를 얻는 방법은 나노튜브 합성을 통한 직접적인 방법과 후처리 기술을 통해 가능하며, 최근에는 금속 나노입자를 촉매로서 화학기상증착(Chemical vapor deposition, CVD)을 이용하여 좁은 직경 분포를 갖는 단일벽 탄소나노튜브의 합성이 보고되었다. 화학기상 증착은 용이하게 단일벽 탄소나노튜브를 합성하며, 성장된 나노튜브의 직경은 촉매금속 나노입자의 크기에 의해 결정된다. 본 연구는 크기가 제어된 산화철 나노입자를 촉매금속으로 사용하여 열화학기상증착법을 이용해 직경분포가 매우 좁고 균일한 단일벽 탄소나노튜브를 합성하였다. 합성된 단일벽 탄소나노튜브 직경과 카이랄리티는 라만 분광법(Raman spectroscopy)과 투과 전자현미경(Transmission electron microscope)을 이용하여 분석하였다.

  • PDF

Valuation of Ecosystem Services through Organic Carbon Distribution and Cycling in the Quercus mongolica Forest at Mt. Worak National Park (월악산 신갈나무림의 유기탄소 분포와 순환을 통한 생태계서비스 가치평가)

  • Won, Ho-Yeon;Shin, Chang-Hwan;Mun, Hyeong-Tae
    • Journal of Wetlands Research
    • /
    • v.16 no.3
    • /
    • pp.315-325
    • /
    • 2014
  • Valuation of ecosystem services through organic carbon distribution and cycling in the Quercus mongolica forest at Mt. Worak national park were investigated from May 2012 through April 2013. The amount of carbon allocated to above and below ground biomass was 81.94 and 20.53 ton C/ha. Amount of organic carbon in litter layer was 6.49 ton C/ha. Amount of organic carbon within 50 soil depth was 141.23 ton C $ha^{-1}$ $50cm-depth^{-1}$. Total amount of organic carbon in this Quercus mongolica forest was estimated to 250.19 ton C $ha^{-1}$. The estimated amount of won in this Quercus mongolica forest in terms of total organic carbon was about 5.27 million won $ha^{-1}$. The amount of carbon evolved through soil respiration was 7.31 ton C $ha^{-1}yr^{-1}$. The amount of carbon evolved through microbial respiration and root respiration was 3.58 and 3.73 ton C $ha^{-1}yr^{-1}$, respectively. The amount of organic carbon absorbed from the atmosphere of this Quercus mongolica forest was 1.61 ton C $ha^{-1}yr^{-1}$ when estimated from the difference between net primary production and microbial respiration. This amount will come to about 33,000 won $ha^{-1}yr^{-1}$ in Korean currency.

Valuation of Ecosystem Services through Organic Carbon Distribution and Cycling in the Pinus densiflora Forest in Mt. Worak National Park (월악산 소나무림의 유기탄소 분포와 순환을 통한 생태계서비스 가치평가)

  • Won, Ho-Yeon;Lee, Young-Sang;Mun, Hyeong-Tae
    • Journal of Wetlands Research
    • /
    • v.17 no.4
    • /
    • pp.332-338
    • /
    • 2015
  • Valuation of ecosystem services through organic carbon distribution and cycling in the Pinus densiflora forest at Mt. Worak National Park were investigated from January 2013 through December 2013. The amount of carbon allocated to above and below ground biomass was 32.17 and 8.04 ton C $ha^{-1}$. Amount of organic carbon in litter layer was 5.55 ton C $ha^{-1}$. Amount of organic carbon within 50cm soil depth was 58.62 ton C $ha^{-1}$ 50cm-$depth^{-1}$. Total amount of organic carbon in this Pinus densiflora forest was estimated to 104.38 ton C $ha^{-1}$. The estimated amount of won in this Pinus densiflora forest in terms of total organic carbon was about 10.44 million won $ha^{-1}$. The amount of carbon evolved through soil respiration was 4.44 ton C $ha^{-1}yr^{-1}$. The amount of carbon evolved through microbial respiration and root respiration was 2.18 and 2.27 ton C $ha^{-1}yr^{-1}$, respectively. The amount of organic carbon absorbed from the atmosphere of this Pinus densiflora forest was 0.44 ton C $ha^{-1}yr^{-1}$ when estimated from the difference between net primary production and microbial respiration. This amount will come to about 44,000 won $ha^{-1}$ in Korean currency.

The estimation of CO concentration in Daegu-Gyeongbuk area using GEV distribution (GEV 분포를 이용한 대구·경북 지역 일산화탄소 농도 추정)

  • Ryu, Soorack;Eom, Eunjin;Kwon, Taeyong;Yoon, Sanghoo
    • Journal of the Korean Data and Information Science Society
    • /
    • v.27 no.4
    • /
    • pp.1001-1012
    • /
    • 2016
  • It is well known that air pollutants exert a bad influence on human health. According to the United Nations Environment Program, 4.3 million people die from carbon monoxide and particulate matter annually from all over the world. Carbon monoxide is a toxic gas that is the most dangerous of the gas consisting of carbon and oxygen. In this paper, we used 1 hour, 6 hours, 12 hours, and 24 hours average carbon monoxide concentration data collected between 2004 and 2013 in Daegu Gyeongbuk area. Parameters of the generalized extreme value distribution were estimated by maximum likelihood estimation and L-moments estimation. An evalution of goodness of fitness also was performed. Since the number of samples were small, L-moment estimation turned out to be suitable for parameter estimation. We also calculated 5 year, 10 year, 20 year, and 40 year return level.

Synthesis of Double-walled Carbon Nanotubes Using Decomposition of Tetra Hydro Furan (Tetra Hydro Furan 열분해를 이용한 이중벽 구조 탄소나노튜브의 합성)

  • Kang, Ha-Na;Jung, Da-Mi;Sok, Jung-Hyun
    • Journal of the Korean Vacuum Society
    • /
    • v.17 no.6
    • /
    • pp.576-581
    • /
    • 2008
  • High-quality double-walled carbon nanotubes (DWNTs) were synthesized without defects and amorphous carbonaceous particles by catalytic decomposition method at $800^{\circ}C$ in high yield. As-synthesized carbon materials almost consist of DWNT bundles with a diameter 12 - 20 nm.. The DWNTs rope have uniform diameter about 2 - 5 um and length up to several tens micrometer. DWNTs is inner tube diameter 0.9 - 1.5 nm and outer tube 1.6 - 2.2 nm. We investigate the crystallinity of DWNTs by TEM and Raman spectroscopy. We also found that the Fe-Mo bimetallic catalyst was active as a very efficient catalyst for the synthesis of DWNTs with the catalyst decomposition method. Our results also indicate that Tetra Hydro Furan (THF) is a very ideal carbon source for the synthesis of DWNTs.

Uncertainty Assessment of Emission Factors for Pinus densiflora using Monte Carlo Simulation Technique (몬테 카를로 시뮬레이션을 이용한 소나무 탄소배출계수의 불확도 평가)

  • Pyo, Jung Kee;Son, Yeong Mo;Jang, Gwang Min;Lee, Young Jin
    • Journal of Korean Society of Forest Science
    • /
    • v.102 no.4
    • /
    • pp.477-483
    • /
    • 2013
  • The purpose of this study was to calculate uncertainty of emission factor collected data and to evaluate the applicability of Monte Carlo simulation technique. To estimate the distribution of emission factors (Such as Basic wood density, Biomass expansion factor, and Root-to-shoot ratio), four probability density functions (Normal, Lognormal, Gamma, and Weibull) were used. The two sample Kolmogorov-Smirnov test and cumulative density figure were used to compare the optimal probability density function. It was observed that the basic wood density showed the gamma distribution, the biomass expansion factor results the log-normal distribution, and root-shoot ratio showd the normal distribution for Pinus densiflora in the Gangwon region; the basic wood density was the normal distribution, the biomass expansion factor was the gamma distribution, and root-shoot ratio was the gamma distribution for Pinus densiflora in the central region, respectively. The uncertainty assessment of emission factor were upper 62.1%, lower -52.6% for Pinus densiflora in the Gangwon region and upper 43.9%, lower -34.5% for Pinus densiflora in the central region, respectively.

Organic Carbon Distribution and Budget in the Quercus variabilis Forest in the Youngha valley of Worak National Park (월악산 용하계곡 굴참나무림의 유기탄소 분포 및 수지)

  • NamGung, Jeong;Choi, Hyeon-Jin;Han, A-Reum;Mun, Hyeong-Tae
    • Korean Journal of Environmental Biology
    • /
    • v.26 no.3
    • /
    • pp.170-176
    • /
    • 2008
  • Organic carbon distribution and carbon budget of a Quercus variabilis forest in the Youngha valley of Mt. Worak National Park were investigated. Carbon in above and below ground standing biomass, litter layer, and soil organic carbon were measured from 2005 through 2006. For the estimation of carbon budget, soil respiration was measured. The amount of carbon allocated to above- and below-ground biomass was 56.22 and 13.90 ton C ha$^{-1}$. Amount of organic carbon in annual litterfall was 2.33 ton C ha$^{-1}$ yr$^{-1}$. Amount of soil organic carbon within 50 cm soil depth was 119.14 ton C ha$^{-1}$ 50 cm-depth$^{-1}$. Total amount of organic carbon in this Q. variabilis forest was 193.96 ton C ha$^{-1}$. Of these, 61.43% of organic carbon was allocated in the soil. Net increase of organic carbon in above- and below-ground biomass in this Q. variabilis forest was estimated to 7.68 ton C ha$^{-1}$ yr$^{-1}$. The amount of carbon evolved through soil respiration was 6.21 ton C ha$^{-1}$ yr$^{-1}$. Net amount of 1.47 ton C ha$^{-1}$ yr$^{-1}$ was absorbed from the atmosphere by this Q. variabilis forest.