• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.259-262
• /
• 2010

최근 건물형상의 다양화로 인하여 수직부재의 불규칙성이 빈번하게 발생하면서 전통적인 보-기둥 형식의 골조에서 변형된 보와 기둥의 특징을 공유하고 있는 경사기둥의 사용빈도가 높아지고 있다. 현재 국내에서 사용하고 있는 내진설계방법은 강도에 근거를 둔 설계법으로서 구조물이 탄성상태에서 저항해야 하는 부재력에 근거하고 있다. 그러나 기준에서 규정하고 있는 또는 그 이상의 지진하중이 구조물에 가해지는 경우에 구조물은 비선형 거동을 하게 되는데 구조물이 비선형 거동을 할 때에는 탄성상태와는 다른 힘의 흐름을 나타내게 된다. 본 논문에서는 12층 철골 모멘트 골조 구조물에 대하여 횡력에 저항하는 정형화된 골조와 경사기둥을 이용한 골조의 내진성능 및 비선형 거동을 조사하였다. 그 결과 강기둥-약보로 설계된 정형화된 구조물에서는 보의 소성힌지가 계속적으로 발달하면서 구조물이 저항하는데 반하여 경사기둥을 가진 구조물은 비탄성 상태에서 경사기둥에 인접한 기둥부재로 하중이 집중되면서 정형골조에 비하여 붕괴 메카니즘이 훨씬 작은 변위에서 발생하는 것을 볼 수 있었다.

• Computational Structural Engineering
• /
• v.2 no.4
• /
• pp.79-88
• /
• 1989

The behavior of composite beams in steel building structures subjected to lateral loading is studied. Mathematical models for the stiffness of composite beams and the strength at the connections, which are dependent on details of the connections are developed based on the previous experimental results and the results from numerical analyses. Analytical models for the skeleton and hysteresis curves of cantilever composite beams are also presented. A single component model for the composite beam, consisting of elastic beam and the end springs at which all the inelstic deformations within a member are lumped, is implemented into the computer program, DRAIN-2D. And a comparison of analytical results is made with the experimental results.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.723-726
• /
• 2011

전 세계적으로 사회기반시설 및 신재생 에너지 생산을 위한 공간부족 문제를 해결하기 위하여 초대형 부유구조물에 대한 관심이 증가하고 있다. 다양한 사용분야에 대한 안정성 확보를 위해 파랑하중에 의한 동적 응답과 부유체의 강성 대비 길이 효과로 인해 발생할 수 있는 특이 거동에 대한 분석이 필요하다. 초대형 부유구조물의 경우 중앙부에 비해 양끝 단에서 과도한 응답이 발생하며, 이를 해결하기 위해 입사파가 들어오는 초대형 부유구조물의 단부에 부착되는 다양한 감요장치(anti-motion device)가 제안되어지고 있다. 초대형 부유구조물에 감요장치가 적용될 경우 입사파에 의한 동적 파압을 감소시켜 구조물의 전반적인 응답을 줄여줄 수는 있지만 감요장치의 질량이 클 경우 오히려 끝단의 응답을 증폭시킬 수 있다. 본 논문에서는 양단 자유 경계조건의 탄성지지된 보를 이용하여 초대형 부유구조물의 길이와 끝단에 부착된 감요장치의 질량으로 인한 영향을 분석하였다.

• Computational Structural Engineering
• /
• v.29 no.2
• /
• pp.33-37
• /
• 2016

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.517-524
• /
• 2012

In this study, the effects of the inelastic shear behavior of beam-column joint and the vertical distribution of lateral load are evaluated considering higher modes on the response of RC OMRF using the pushover analysis. A structure used for the analysis was a 5-story structure located at site class SB and seismic design category C, which was designed in accordance with KBC2009. Bending moment-curvature relationship for beam and column was identified using fiber model. Also, bending moment-rotation relationship for beam-column joint was calculated using simple and unified joint shear behavior model and moment equilibrium relationship for the joint. The results of pushover analysis showed that, although the rigid beam-column joint overestimated the stiffness and strength of the structure, the inelastic shear behavior of beam-column joint could be neglected in the process of structural design since the average response modification factor satisfied the criteria of KBC2009 for RC OMRF independent to inelastic behavior of joint.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.738-740
• /
• 2012

최근 변단면 거더의 경제성을 고려하여 장경간 거더 교량과 강골조 구조물에 변단면보의 사용이 증가하고 있으며, 고강도 강의 등장으로 인해 변단면보의 정확한 좌굴 강도의 평가가 매우 중요시 되고 있다. 본 논문에서는 기존에 연구된 탄성 횡-비틀림 좌굴 강도에 관한 연구를 바탕으로하여 별로 비탄성 구간에 비지지 길이가 존재하는 일축대칭 I형 변단면보의 횡-비틀림 좌굴 강도 해석을 실시하였다. 해석에는 유한요소해석프로그램인 ABAQUS(2007)가 사용되었으며, MINITAB(2006)을 이용하여 간편한 설계식을 제안하고 있다. 일단 계단식 단면을 가지는 보에 대하여 고려하였으며, 플랜지 길이 방향 비, 너비방향 비, 두께의 비로 계단식 I형 보를 나타내었다. 집중 하중을 적용시켰으며 비선형 해석을 위해 잔류응력 및 초기변형과 재료비선형을 고려하였다. 본 연구 결과에서 제안된 식은 향후 다양한 하중이 작용하는 비탄성 횡-비틀림 좌굴 강도에 대한 연구에 많은 도움이 될 것이다.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.5
• /
• pp.503-513
• /
• 2007

The seismic responses of a building are affected by the connection characteristics that have effects on structural stiffness. In this study, push-over analysis and time history analysis were performed to estimate structural behavior of 2D eight-story unbraced steel structures with partially restrained composite connections using a nonlinear dynamic analysis program. Nonlinear $M-{\theta}$characteristics of connection and material inelastic characteristics of composite beam and steel column were considered. The idealization of composite semi-rigid connection as fully rigid connection yielded an increase in initial stiffness and ultimate strength in the push-over analysis. In time history analysis, the stiffness and hysteretic behavior of connections have effects on base-shear force, maximum story-drift and maximum moment in beams and columns. For seismic waves with PGA of 0.4 g, the structure with the semi-rigid composite connections shows the maximum story-drift with less than the life safety criteria by FEMA 273 and no inelastic behavior of beam and column, whereas in the structure with rigid connections, beams and columns have experienced inelastic behaviors.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.101-111
• /
• 2005

In this study, it is investigated the modified modulus of elasticity of the reinforced concrete columns including the longitudinal reinforcing steels as well as the confinement effect of the core concrete due to the transverse reinforced steel through the literature reviews. Equations are derived in order to evaluate the modified modulus of elasticity for the reinforced compressive concrete including the confinement effect. The finite element analysis for the 20 story reinforced concrete building is undertaken as a case study depending on the steel ratio and modulus of elasticity, and the analysis results are discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.92-98
• /
• 1991

The structures such as railway bridges can be modelled as the multi-span beam on the elastic foundation. These structures are usually subject to the moving load, which has a great effect on dynamic stresses and can cause severe motions, especially at high velocities. In this paper, the dynamic responses of the multi-span beam on the elastic foundation were obtained by using the Galerkin's method and the numerical time integration technique. As trial functions, the same orthogonal polynomial functions obtained in part 1, were used. From the numerical results, it was found that the one term expansion of the assumed solution usually leads to the accurate solutions. However, in the case that the stiffness of the transnational spring is very high or the rotational spring is placed where the slope of the first mode is zero, the higher modes must be included to obtain the accurate solutions.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.985-988
• /
• 2008

A linear analysis method using reduced secant stiffness was developed for inelastic earthquake design of reinforced concrete structures. In the proposed method, the beam-column element and plane element, which are the same as used in conventional elastic analysis, are used for structural modeling. Based on the structural plastic mechanism intended by engineer, the distribution of inelastic members is determined. The secant stiffness of the inelastic members is determined based on the target ductility of the structure. Inelastic strengths of the members are calculated by using linear analysis on the structure modeled with secant stiffness. Plastic rotations in the inelastic members are calculated with the nodal rotations resulting from the secant stiffness analysis. For verification, the proposed method was applied to the inelastic earthquake designs of a moment-resisting frame and a dual system of two dimensions, and also a dual system of three dimensions.