• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.151-159
• /
• 1999

지구규모의 대기-지표-생물권(Atmo-Geo-Bio-Sphere)간의 끊임없는 상호작용(Interaction)의 피드백(Feedback)의 결과로 야기되는 기상변화는 아직도 이해를 위한 우리의 노력이 더욱 요구되고 있는 자연현상이다. 지구상의 모든 생물은 궁극적으로는 환경변화에 순응하여 생태계의 안정을 유지하는 방향으로 진화할 것이므로 생물자원의 관리분야라 할 수 있는 농업생산도 결국 기상자원의 변화에 효율적으로 적응하기 위한 인간활동인 것이다. 최근 빈발하고 있는 세계적인 이상기상의 출현은 일시적인 현상이 아니라 과도한 인간활동에서 야기된 대기질의 악화에 기인하는 비가역적이고 비선형적인 현상이라는데 불확실성과 심각성이 매우 크다. 지구상의 모든 농업생태계는 기상의 영향을 크게 받을 뿐만 아니라 반대로 기상에 커다란 영향을 미치는 중요한 생물권의 일부로 인식되고 있다. 농업활동의 결과는 항상 크던 작던 간에 대기조성에 영향을 미치게 되고 이는 다시 상호작용과 피드백에 의해 기상과 기후를 변화시키는 동인이 될 수 있다. 지구환경변화와 농업과의 관계는 지금까지는 주로 "기후변화가 농업생산에 미치는 영향"에 대한 접근방법을 택하여 왔다. 여기에서는 이와는 달리 "농업활동이 기후변화와 변동에 미칠 수 있는 가능성과 잠재력"에 대한 접근방법을 이용하여 농업과 기상과의 상호작용과 피드백효과를 새로운 시각에서 조견하고자 하였다. 상호작용 중 먼저 기후학적 변화원인으로 관심대상이 되고 있는 농업생태계의 온실기체 방출과 고정의 측면에서 이와 연관성이 높은 농업활동별로 온실가스의 방출/고정에 미치는 영향을 소개하고, 다음으로 생물지리화학적 및 생물지리물리학적 해석 방법을 검토 소개하였다. 한편 농업활동에 따른 지표면 특성의 변화가 국지기상 변화에 미치는 영향에 대한 검토를 에너지수지와 수분수지 관점에서 소개하였으며, 끝으로 농업활동의 근거지인 농촌지역의 인문사회학적 변화와 농업활동간의 관계, 그리고 이들이 기후변화/변동에 미칠 수 있는 잠재적 영향력을 살펴보았다.수 있는 잠재적 영향력을 살펴보았다.

• Journal of the Speleological Society of Korea
• /
• no.67
• /
• pp.1-9
• /
• 2005

The lava-calcification which was found in Geunjisul located in Jeju-do (Korea) was investigated to analyse the cause of calcification through the internal factor of cave structure and surroundings in company with relevant ecological system. The volcanic cave is degenerated after formation from volcano lava extravasation, however, the cave became more stronger with solidification and petrification by the reinforced structure of calcification as the cement in concrete buildings unprecedentedly if the lava-calcification occurred in the cave. Such a Progressive Phenomena of lava-calcification was verified in progress first in Geonjigul located at Hyubjae-ri, but those would be found in other simiiar case of caves distributed and connected with seaside of shelly sand beach.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.1
• /
• pp.47-54
• /
• 2002

This study examined the chemical and sensory characteristics of Altari Dongchimi with inoculation of Leuconostoc citreum IH22. Dongchimi was stored at room temperature for the first day and at 4$^{\circ}C$ from 2nd to 28th day. The pH was somewhat lower in Altari Dongchimi when first inoculated with Leuconostoc citreum IH22 than non -treated Dongchimi. As fermentation proceeded, titratable acidity of Altari Dongchimi significantly increased. The patterns of microflcral changes in both the inoculated and the control were similar during fermentation: the total number of bacteria increased at the beginning, but rapidly decreased right after the optimum ripening point. The hardness and fracturability of both Dongchimi's decreased gradually during fermentation. The evaluation of the sensory qualities showed that the sour taste and fresh taste resulted in similar scores in both Dongchimi's but overall acceptability of the control was higher than that of inoculated one with Leuconostoc citreum IH22.

• Applied Biological Chemistry
• /
• v.35 no.2
• /
• pp.126-131
• /
• 1992

For the development of kiwifruit storage method applicable to farm level, several quality indicator of kiwifruit(Actinidia chinensis Planch.) were measured during storage at modified atmosphere(MA) conditions(0.04, 0.06, 0.08 and 0.10 mm PE Film). The results obtained from the experiment were as follows. The highest firmness was marked by the kiwifruit kept in 0.06 mm thick film bag and the lowest weight loss was shown in 0.10 mm thick film bag. The largest production of respiratory rate was occured after storage for 30 days. The concentration of $O_2\;and\;CO_2$ in 0.06 mm thick film bag was 2.6% and 3.2% after storage for 60 days, respectively. It could be concluded that the optimum PE film thickness for MA storage of kiwifruit was 0.06 mm.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.593-596
• /
• 2008

Domestic area of most be happened chloride deicer damage. Because daily mean temperature is below 0$^{\circ}C$ from the area of domestic most. Use of deicing chemicals has been and will continue to be a major part of concrete structure in the highway. Chloride-containing chemicals such as calcium chloride or rock salt are main deicers for the road. Extensive use of chloride deicers is, however, not only the source of substantial cost penalties due to their corrosive action and ability to deterioration roadway surface materials but also the source of environmental damages. Chloride-containing chemicals such as calcium chloride or rock salt are main deicers for the road. Extensive use of chloride deicers is, however, not only the source of substantial cost penalties due to their corrosive action and ability to deterioration roadway surface materials but also the source of environmental damages. In this study, Use of deicing chemicals has been and will continue to be a major part of highway freeze-thaw durability and carbonation of concrete surface protecting materials

• Resources Recycling
• /
• v.26 no.6
• /
• pp.38-44
• /
• 2017

As by-pass dust (BPD) made from cement manufactured process is designated waste, it is required to bury as high cost. The main component of BPD is potassium chloride (KCl), and used for the fertilizer. For using KCl to the fertilizer, the pH value of KCl is required as neutral or weak acid. However, it is not suitable to apply BPD into the fertilizer directly without any other treatment because BPD's pH value is shown 12.0~12.5; a high base. In this study, the carbon dioxide ($CO_2$) was used for removing calcium oxide (CaO) and reducing pH value during manufacturing process of KCl. We fixed inner condition of the carbon test chamber as $25^{\circ}C$-50RH%, and retained 0~7 hours under the 20 vol% of $CO_2$ atmosphere. After experiment, we analyzed the content of CaO and pH value from each samples. The more time exposed to $CO_2$, the content of CaO and pH value are shown. Furthermore, pH value exposed in 6 hours nearly reached 7.

• Journal of Powder Materials
• /
• v.15 no.2
• /
• pp.125-135
• /
• 2008

[ $TiO_2$ ] nanotubes for photocatalytic application have been synthesized by hydrothermal method. $TiO_2$ nanotubes are formed by washing process after reaction in alkalic solution. Nanotubes with different morphology have been fabricated by changing NaOH concentration, temperature and time. $TiO_2$ nanoparticles were treated inside NaOH aqueous solution in a Teflon vessel at $110^{\circ}C$ for 20 h, after which they were washed with HCl aqueous solution and deionized water. Nanotube with the most perfect morphology was formed from 0.1 N HCl washing treatment. $TiO_2$ nanotube was also obtained when the precursor was washed with other washing solutions such as $NH_4OH$, NaCl, $K_2SO_4$, and $Na_2SO_3$. Therefore, it was suggested that $Na^+$ ion combined inside the precursor compound slowly comes out from the structure, leaving nanosheet morphology of $TiO_2$ compounds, which in turn become the nanotube in the presence of hydroxyl ion. To stabilize the sheet morphology, the different type of washing treatment solution might be considered such as amine class compounds.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.206-211
• /
• 2005

Mediated electrochemical oxidation (MEO) of polyethylene glycols (PEGs) of molecular weight of 1000, 4000 and 20000, was carried out on both platinum (Pt) and titanium-iridium electrodes in 8.0 M nitric acid solution containing 0.5 M Fe(II) and Co(II) ion. The electrochemical parameters such as current densities, kinds of electrode, electrolyte concentration and removal efficiency were investigated in both Fe(III)/Fe(II) and Co(III)/Co(II) redox systems. The PEGs was decomposed into carbon dioxide by MEO in Fe(III)/Fe(II) and Co(III)/Co(II) redox system during 180 min and 210 min at the current density of $0.67A/cm^2$ on the Pt electrode. Removal efficiency of PEGs by MEO was better in Co(III)/Co(II) redox system than Fe(III)/Fe(II) redox system, indicating mediated electrochemical removal efficiency was 100%.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.367-374
• /
• 2021

In this study, the applicability of mechanochemical process for the manufacture of self-healing admixtures and the effect of mechanochemical process on the self-healing performance were evaluated. The self-healing admixtures were adopted as a highly reactive materials(expansive agent, swelling material and crystal growth agent) for mechanochemical processes. The self-healing admixtures for the mechanochemical process application were evaluated by X-Ray Diffraction and Fourier Transform Infrared Spectroscopy analysis, water permeability performance was used to evaluate self-healing performance of mortar. As a result of the evaluation, the self-healing performance of the WM(With-Mortar)3 sample to which mechanochemical process increased by 4.1% compared to the WM1 sample that was not treated, and the average healing index was 94.3%.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.2
• /
• pp.95-101
• /
• 2019

High voltage impulse(HVI) has been gained attention as an alternate technique controlling $CaCO_3$ scale formation. Investigation of key operational parameters for HVI is important, however, those had not been reported yet. In this study, the effect of temperature and applied voltage of HVI on $Ca^{2+}$ concentration was studied. As the applied voltage from 0 to 15kV and the temperature increased from 20 to $60^{\circ}C$, the $Ca^{2+}$ concentration decreased, indicating that the aqueous $Ca^{2+}$ precipitated to $CaCO_3$. The $Ca^{2+}$ concentration decreased up to 81% under the condition of 15kV and $60^{\circ}C$. Rate constant for the precipitation reaction, k was determined under different temper1ature and voltage. The reaction rate constant under the 15kV and $60^{\circ}C$ condition was evaluated to $66{\times}10^{-3}L/(mmol{\cdot}hr)$, which was 5 times greater than the k of the reaction without HVI at same temperature. The increases in k by HVI at higher temperature region(40 to $60^{\circ}C$) was much greater than at lower temperature region(20 to $40^{\circ}C$), which implies temperature is more important parameter than voltage for reducing $Ca^{2+}$ concentration at high temperature region. These results show that the HVI induction accelerates the precipitation to $CaCO_3$, particularly much faster at higher temperature.