• Title/Summary/Keyword: 탄산용액

Search Result 228, Processing Time 0.025 seconds

Origin of Manganese Carbonates in the Janggun Mine, South Korea (장군광산산(將軍鑛山産) 망간광물의 성인(成因)에 관(關)한 연구(硏究))

  • Kim, Kyu Han
    • Economic and Environmental Geology
    • /
    • v.19 no.2
    • /
    • pp.109-122
    • /
    • 1986
  • Mn-Pb-Zn-Ag deposits of the Janggun mine are hosted in the Cambro-Ordovician Janggun limestone mostly along the contacts of the Jurassic Chunyang granite. The deposits are represented by several ore pipes and steeply dipping lenticular bodies consisting of lower Pb-Zn-Ag sulfide ores and upper manganese carbonate and oxide ores. The former consists mainly of arsenic, antimony, silver, manganese, and tin-bearing sulfides, whereas the latter are characterized by hypogene rhodochrosite, and superficial manganese oxides including todorokite, nsutite, pyrolusite, cryptomelane, birnesite and janggunite. Origin of the upper manganese ore deposits has been a controversial subject among geologists for this mine: hydrothermal metasomatic vs. syngenetic sedimentary origin. Syngenetic advocators have proposed a new sedimentary rock, rhodochrostone, which is composed mainly of rhodochrosite in mineralogy. In the present study, carbon, oxygen and sulfur isotopic compositions were analayzed obtaining results as follows: Rhodochrosite minerals, (Mn, Ca, Mg, Fe) $CO_3$, from hydrothermal veins, massive sulfide ores and replacement ores in dolomitic limestone range in isotopic value from -4.2 to -6.3‰ in ${\delta}^{13}C$(PDB) and +7.6 to +12.9‰ in ${\delta}^{18}O$(SMOW) with a mean value of -5.3‰ in ${\delta}^{13}C$ and +10.7‰ in ${\delta}^{18}O$. The rhodochrosite bearing limestone and dolomitic limestone show average isotopic values of -1.5‰ in ${\delta}^{13}C$ and +17.5‰ in ${\delta}^{18}O$, which differ from those of the rhodochrosite mentioned above. This implies that the carbon and oxygen in ore fluids and host limestone were not derived from an identical source. ${\delta}^{34}S$ values of sulfide minerals exhibit a narrow range, +2.0 to +5.0‰ and isotopic temperature appeared to be about $288{\sim}343^{\circ}C$. Calculated initial isotopic values of rhodochrosite minerals, ${\delta}^{18}O_{H_2O}=+6.6$ to +10.6‰ and ${\delta}^{13}C_{CO_2}=-4.0$ to -5.1 ‰, strongly suggest that carbonate waters should be deep seated in origin. Isotopic data of manganese oxide ores derived from hypogene rhodochrosites suggest that the oxygen of the limestone host rock rather than those of meteoric waters contribute to form manganese oxide ores above the water table.

  • PDF

Removal of Uranium by an Alkalization and an Acidification from the Thermal Decomposed Solid Waste of Uranium-bearing Sludge (알카리화 및 산성화에 의한 우라늄 함유 슬러지의 열분해 고체 폐기물로부터 우라늄 제거)

  • Lee, Eil-Hee;Yang, Han-Beom;Lee, Keun-Young;Kim, Kwang-Wook;Chung, Dong-Yong;Moon, Jei-Kwon
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.11 no.2
    • /
    • pp.85-93
    • /
    • 2013
  • This study has been carried out to elucidate the characteristics of the dissolution for Thermal Decomposed Solid Waste of uranium-bearing sludge (TDSW), the removal of impurities by an alkalization in a nitric acid dissolving solution of TDSW, and the selective removal (/recovery) of uranium by an acidification in an carbonate alkali solution, respectively. TDSW generated by thermal decomposition of U-bearing sludge which was produced in the uranium conversion plant operation, was stored in KAERI as a solid-powder type. It is found that the dissolution of TDSW is more effective in nitric acid dissolution than oxidative-dissolution with carbonate. At 1 M nitric acid solution, TDSW was undissolved about 30wt% as a solid residue, and uranium contained in TDSW was dissolved more than 99%. In order to the alkalization for the nitric acid dissolving solution of TDSW, carbonate alkalization is more effective with respect to remove the impurities. At the carbonate alkali solution controlled to about 9 of pH, Al, Ca, Fe and Zn co-dissolved with U in dissolution step was removed about $98{\pm}1%$. On the other hand, U could be recovered more than 99% by an acidification at pH about 3 in a carbonate alkali solution, which was nearly removed the impurities, adding 0.5M $H_2O_2$. It was found that uranium could be selectively recovered (/removed) from TDSW.

Analysis on the Generation Characteristics of $^{14}C$ in PHWR and the Adsorption and Desorption Behavior of $^{14}C$ onto ion Exchange Resin (중수로 원전$^{14}C$ 발생 특성 및 이온교환수지에 의한 $^{14}C$$\cdot$착탈 거동 분석)

  • 이상진;양호연;김경덕
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2004.06a
    • /
    • pp.147-157
    • /
    • 2004
  • The production of $^{14}C$ occurs in the Moderator(MOD), Primary Heat Transport System (PHTS), Annulus Gas System(AGS) and Fuel in the CANDU reactor. Among the four systems, The MOD system is the largest contributor to $^{14}C$ production(approximately 94.8%). $^{14}C$ is distributed of $^{14}CO_2$, $H_2^{14}CO_3$, $H^{14}{CO_3}^-$ and $^{14}{CO_3}^{2-}$ species as a function of the pH of water. Of these species, $H_2^{14}CO_3$ and $H^{14}{CO_3}^-$ form are predominant because the pH of MOD system is > 5. In this paper, adsorption-desorption characteristics of bicarbonate ion (${HCO_3}^-$) by IRN 150 resin was investigated. ${HCO_3}^-$ ion existed in neutral condition(app. pH 7)was reacted with ion exchange resin (IRN-150) and saturated with it. Then $NaNO_3$ and $Na_3PO_4$ solutions selected as extraction materials were used to make an investigation into feasibility of ${HCO_3}^-$ extraction from resin saturated with ${HCO_3}^-$. Desorption of $CO^{2+}$ and $Cs^+$ ion by $Na^+$ ion was not occurred, and desorption of ${HCO_3}^-$ ion by ${NO_3}^-$ and ${PO_4}^{3-}$ was occurred slowly. Also, the status of ion exchange which is used in Wolsong NPPs and generation of spent resin yearly were surveyed.

  • PDF

Strength and Effectiveness of Grouting of Sand Treated with Bacteria (Bacteria로 처리된 모래지반의 강도 및 주입효과)

  • Park, Kyung-Ho;Kim, Dae-Hyeon
    • Journal of the Korean Geotechnical Society
    • /
    • v.29 no.2
    • /
    • pp.65-73
    • /
    • 2013
  • The purpose of this study is to confirm strength and effectiveness of grouting of the sand treated with bacteria. In order to analyze the cementation of sand treated with bacteria, five types of specimens(Not treated, Cement 2% treatment, Cement 4% treatment, Cement 2% + $CaCO_3$ 2% treatment and $CaCO_3$ 4% treatment) were made. Unconfined compressive strength tests were done on $D\;5cm{\times}H\;10cm$ specimens and biogrouting tests were performed on $D\;6cm{\times}H\;12cm$ specimens to observe the effectiveness of grouting with bacteria. As a result, Cement 2% + $CaCO_3$ 2% treatment was found to be the most effective in terms of the unconfined compressive strength.

Influence of Carbonation on the Chloride Diffusion in Concrete (탄산화 현상이 콘크리트 중의 염소이온 확산에 미치는 영향 연구)

  • Oh, Byung-Hwan;Lee, Sung-Kyu;Lee, Myung-Kue;Jung, Sang-Hwa
    • Journal of the Korea Concrete Institute
    • /
    • v.15 no.6
    • /
    • pp.829-839
    • /
    • 2003
  • Recently, the corrosion of reinforced concrete structures has received great attention related with the deterioration of sea-side structures, such as new airport, bridges, and nuclear power plants. In this regards, many studies have been done on the chloride attack in concrete structures. However, those studies were confined mostly to the single deterioration due to chloride only, although actual environment is rather of combined type. The purpose of the present study is, therefore, to explore the influences of carbonation to chloride attack in concrete structures. The test results indicate that the chloride penetration is more pronounced than the case of single chloride attack when the carbonation process is combined with the chloride attack. It is supposed that the chloride ion concentration of carbonation region is higher than the sound region because of the separation of fixed salts. Though the use of fly ash pronounces the chloride ion concentration in surface, amounts of chloride ion penetration into deep region decreases with the use of fly ash. The present study allows more realistic assessment of durability for such concrete structures which are subjected to combined attacks of both chlorides and carbonation but the future studies for combined environment will assure the precise assessment.

The Synthesis of $BaTiO_3$ Powder by Sol-Gel Process (졸-겔법에 의한 티탄산 바륨 분말 합성)

  • Doh Kil-myung;Kim IIl-chool;Park Dae-wook
    • Journal of the Korean Chemical Society
    • /
    • v.37 no.1
    • /
    • pp.92-97
    • /
    • 1993
  • Sol-Gel Process is a new method of synthesis of high-quality of glass and glass-ceramics. Ferroeletric material, $BaTiO_3$ powder was made by reacting $Ba(OH)_2$ and $Ti[OCH(CH_3)_2]_4$ in alcohol. There was about 16.5% weight loss in thermogravimetric analysis. It was crystallized to tetragonal structure by heat treatment at $700^{\circ}C$ for 2 hours and had a specific surface area, 16.0 $m^2/g.$ Shrinkage curve by sintering was began around $1100^{\circ}C$ in dilatometer analysis.

  • PDF

Phase Changes of Calcium Carbonate by Temperature and RPM in Continuous Crystallizer (연속식 결정화기에서 온도와 교반속도에 의한 탄산칼슘 결정의 형상변화)

  • Shin, Yuonjeong;Han, Hyunkak
    • Korean Chemical Engineering Research
    • /
    • v.57 no.5
    • /
    • pp.666-671
    • /
    • 2019
  • Calcium carbonate involves three phases such as calcite, vaterite, and aragonite. Calcite and aragonite were more thermodynamically stable than vaterite. The synthesis of aragonite crystals by the reaction with sodium carbonate and calcium chloride solutions was investigated focusing on the effect of temperature and rpm in continuous crystallizer. In the batch crystallization test, calcite was synthesized by a relatively low temperature (under $40^{\circ}C$), but aragonite was formed at high temperature. In the continuous process with 100 rpm, no aragonite was found regardless of reaction temperature. But as increasing the stirring rate to 300 rpm and 500 rpm, the ratio of aragonite to calcite increased as increasing the temperature.

Effect of Bicarbonate and Phosphate Buffer Treatments on the Structure and Thermal Stability of Spent Layer Meat (중 탄산 및 인산염 완층액 처리가 노계육의 조직구조 및 열안정성에 미치는 영향)

  • Yi, Song-Sop;Mast, Morris G.
    • Korean Journal of Food Science and Technology
    • /
    • v.23 no.6
    • /
    • pp.695-701
    • /
    • 1991
  • Spent layer breast meat and leg meat samples washed with 0.05 M sodium bicarbonate solution and 0.04 M phosphate buffer(pH 8.3) showed decreases in heat denaturation temperature indicating the destabilization of myofibrillar proteins. The destabilization was attributed to the solubilization of 95 Kdalton and 55 kdalton proteins from the myofibrils observed in gel-electrophoretograms. Transmission electron microscopy further indicated the breakage of Z-lines.

  • PDF

Measurements of ${CO_3}^{2-}$ ion concentration using porous silicon diaphragm coated with LDPE film (LDPE 필름으로 코팅된 다공질 실리콘 다이어프램을 이용한 탄산칼륨 용역내의 ${CO_3}^{2-}$ 이온농도 측정)

  • Yang, Jung-Hoon;Kang, Chul-Goo;Jin, Joon-Hyung;Min, Nam-Ki;Hong, Suk-In
    • Proceedings of the KIEE Conference
    • /
    • 2001.07c
    • /
    • pp.1908-1910
    • /
    • 2001
  • 본 논문은 마이크로머시닝 기술을 이용하여 lift-off 공정으로 패턴닝 한 후 TMAH (Tetramethylammonium Hydroxide) 용액으로 $5{\sim}100{\mu}m$ 두께의 실리콘 다이어프램을 제작하였다. Pt/Ti 박막을 HF 전해질의 mask 물질로 사용하여 HF 용액 내에서 전기화학적 방법으로 정전압을 인가, 다이어프램 영역에 다공질 실리콘을 성장시켜 관통하였다. 140$^{\circ}C$의 질소 분위기에서 $10{\sim}15{\mu}m$두께의 LDPE(Low Density Poly Ethylene) 필름을 물리적으로 다이어프램 영역에 코팅하고 $K_2CO_3$ 용액내에서 ${CO_3}^{2-}$ 이온의 barrier에 의한 전류의 감소를 전기화학적인 분석방법에 의하여 측정하였다. 일정 전압하에서 이온 농도에 기인하는 다공질 실리콘과 LDPE 표면에서 Barrier의 두께에 따른 저항의 증가를 전극으로 감지하여 농도-전류의 특성을 측정하고 이것을 기준으로 하여 미지농도의 $K_2CO_3$ 용액내의 ${CO_3}^{2-}$ 이온 농도를 측정하였다.

  • PDF

The Characteristics of Alkaline Pretreatment Methods of Cellulosic Biomass (섬유소계 바이오매스의 분별을 위한 다양한 알칼리 전처리 특성)

  • Kim, Jun Seok
    • Korean Chemical Engineering Research
    • /
    • v.51 no.3
    • /
    • pp.303-307
    • /
    • 2013
  • This study compares the efficacy of soaking and percolation pretreatments with alkaline solutions for lignocellulosic biomass. Various biomass such as rice straw and barley were pretreated by soaking processes in various alkaline solutions including sodium hydroxide, potassium hydroxide, aqueous ammonia and sodium carbonate. The enzymatic digestibility of rice straw and barley that had been pretreated by soaking in aqueous ammonia was over 80%. Eucalyptus residue, Larix leptolepis and Pinus rigida exhibited relatively low enzymatic digestibility. Nevertheless, the enzymatic digestibility of pretreated eucalyptus residue was increased by five times compared to that of the initial biomass. And, the enzymatic digestibility of the percolation pretreated eucalyptus residue was increased 12 times.