• 전기의세계
• /
• v.56 no.2
• /
• pp.39-43
• /
• 2007

• Construction Engineering and Management
• /
• v.14 no.2
• /
• pp.39-42
• /
• 2013

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.80-80
• /
• 1994

세라믹막을 이용한 oil 폐수 처리의 기초 연구로서 정밀여과용 세라믹막의 제조와 oil(kerosene)-in-water 타입 에멀젼에 대한 막분리 효율이 연구되었다. 정밀여과 막으로서는 압출(extrusion)법으로 성형하여 제조한 $\alpha$-알루미나 튜브(평균 기공크기 0.9 $\mum$)와 이들 튜브(담체)내부에 $ZrO_2$ 또는 $Al_2O_3$ 다공성 박막을 코팅한 2층 구조의 복합막들을 사용하였다. 담체의 높은 투과율 ($1700 l/m^2\cdot h$ at $\Deltap = 1$ atm)을 어느정도 유지하면서 막분리 효율을 증대시킬 수 있는 새로운 슬러리 코팅법이 개발되엇으며, 코팅후 950-1300$\circ$C 에서 열처리한 코팅층의 두께와 평균 기공크기는 각각 5 - 20 $\mum$정도 이었다. 정밀여과막의 특성평가를 위하여 막 제조조건에 따른 코팅층의 두께 및 결함유무를 SEM으로 일단 관찰한 후에 Bubble Point Test와 Mercury Porosimeter를 이용하여 측정한 최대 및 평균 기공반경과 물의 투과량으로부터 막 전체에 대한 결함 유무와 결함의 허용한도등을 비교 분석하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.2-4
• /
• 2019

PCI Express(PCIe) 버스는 시스템 내·외부의 다양한 디바이스들을 연결하는데 여전히 중요한 역할을 하고 있다. 이 PCIe 버스를 확장하기 위해서 PCIe 스위치가 사용되며 호스트(서버)와 외부 디바이스를 연결할 때 다양한 케이블 미디어가 사용된다. 본 연구에서는 광 타입과 구리선 타입의 2종류 케이블이 장착 가능한 자체 제작된 PCIe 어댑터 카드를 사용하여 응용 프로그램 레벨에서 성능을 확인하였다. 서로 다른 2종류의 디바이스들을 대상으로 실험한 결과, 성능상의 큰 차이는 발견되지 않아서 케이블의 종류와는 무관하게 상호 운영에 크게 문제가 없을 것으로 예상된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1259-1268
• /
• 2010

In this paper, we presented a new LC prototype synthesis method for the multi-band filter. For synthesis a multi-band filter with the required frequency response, we proposed the diagram of poles and zeros, also, we proposed the optimization process for finding the combination of optimized poles and zeros. From the transfer and reflection functions calculated from poles and zeros, we performed the quasi-elliptic LC prototype synthesis of multi-band filter. Using the proposed LC prototype synthesis method of multi-band filter, dual-band filter operating at GSM(880~960 MHz) and ISM(2,400~2,500 MHz) and triple-band filter operating at GSM(880~960 MHz) and ISM(2,400~2,500, 5,725~5,850 MHz) were designed and fabricated.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.115-123
• /
• 2018

The primary objective of this study is to develop an all-in-one based steel pipe pile cutting robot prototype that improves the conventional steel pipe pile head cutting work in safety, quality, and productivity. For this, the following research works are conducted sequentially; 1)literature review and expert survey, 2)selection of core technology using AHP analysis, 3)deduction of detail design, 4)verification of structural stability, 5)development of full-scale prototype. As a result leveling laser and laser detector(94.46), plasma cutter(96.72), rotary grapple(98.45) are selected as a core technologies. As an outcome, it is analyzed that gripper, cylinder pivot bracket and gripper base are structurally stable. Their maximum stresses are shown as 43.0%, 19.4%, 5.3% compared to their yield strength respectively. The development of full-scale prototype in this study will be utilized for the development of the all-in-one attachment based steel pipe pile cutting robot commercialization model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.307-308
• /
• 2013

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.417-420
• /
• 2004

UML은 1997년 버전 1.0이 나온 이후로 여러 변화를 거치면서 산업계의 표준으로 자리잡았다. UML 을 위한 다양한 툴이 개발되고 툴 사이의 모델 교환을 위해 UML XMI 이 개발 되었다. UML 2.0에서는 모델 교환뿐 아니라 다이어그램 정보와 노테이션에 대한 정보도 교환하기 위해 다이어그램 교환을 위한 스펙을 발표했다. 다이어그램은 노테이션의 집합으로 이루어지고 노테이션은 다시 여러 하위 노테이션으로 구성된다. Diagram Interchange Specification은 이런 관계를 XMI로 표현한다. 다이어그램 정보 교환을 지원하는 편집기는 XMI 를 주고받을 수 있는 부분과 다이어그램 구조에 따라 다이어그램과 노테이션을 생성할 수 있는 기능이 필요하다. 본 논문에서는 다이어그램 메타 모델을 이용하여 모델 중심의 메타편집기 프로토타입을 보여준다.

• Composites Research
• /
• v.18 no.1
• /
• pp.45-54
• /
• 2005

The delamination in the filament-wound composite flywheel rotor often lowers the performance of the flywheel energy storage system. A conventional ring type hub usually causes tensile stresses on the inner surface of the composite rotor, resulting in lowering the maximum rotational speed of the rotor. In this work, the stress and strain distributions within a hybrid composite rotor were derived from the two-dimensional governing equation with the specified boundary conditions, and an optimum pressure at the inner surface of the rotor was proposed to minimize the strength ratio and maximize the storage energy. A split type hub was introduced to apply the calculated optimum pressure at the inner surface, and a spin test was performed up to 40,000 rpm to demonstrate the performance of the split type hub with radial and circumferential strains measured using a wireless telemetry system. From the analysis and the test, it was found that the split type hub successfully generates a compressive pressure on the inner surface of the rotor, which can enhance the performance of the composite rotor by lowering the strength ratio within the rotor.

• Cartoon and Animation Studies
• /
• s.47
• /
• pp.103-123
• /
• 2017

In recent years, some of the brands of cosmetics in Korea have launched the BB Cream only for man. Cosmetics is not only necessary for woman and it has been accepted by the male. A programme hosted by 김기수 is aimed to teach the female how to make up. As a result, the comprehension of the gender and the development of the times have been combined closely. The understanding of gender has been developed from binary opposition to the diversity of gender. The movements that were aimed at advocating feminism caused by some events reminded us of that we should pay attention to the equalization of the gender. We can see that people want to liberate themselves from the sexual stereotype through these social phenomenons. Meanwhile, animation advertising has also experienced a transformation, which is from that to shape a role under sexual stereotype to that to pay more attention to the diversity of gender during the progress of shaping a role. During the initial stage of the animation advertising's prosperity, what it described was based on the male. The male was the permanent theme. On the contrary, the female only played a subordinate role. However, with the development of feminism, to realize self-worth of the female and to fight for the gender equality have been mentioned more and more frequently. All these factors have prompted the animation advertising to break the stereotype when shaping a new role and change the sexual stereotype in order to create new animation figures.