• 제목/요약/키워드: 타이

Search Result 1,465, Processing Time 0.031 seconds

Effects of Reflecting Film Mulching on the Fruit Quality of Satsuma Mandarin(Citrus Unshiu Marc.) in the Plastic House. (하우스 밀감의 품질에 미치는 반사필름 멀칭 효과)

  • 문덕영;금용호
    • Journal of Bio-Environment Control
    • /
    • v.7 no.3
    • /
    • pp.259-267
    • /
    • 1998
  • This study was carried out to investigate the effect of mulching materials on the fruit quality of Miyagawa Early Satsuma Mandarin in the plastic house. The mulching time was 10 days after water irrigation breakage. The mulching materials used, in order of decreasing light reflectivity, were; micro-perforated vinyl sheets, non-woven fabric film, porous black P.E. film and non-mulching(control). Peel coloration by a values in the treatment of the micro-perforated vinyl sheets showed a 6.93 increase over the control group. The a/b values were similar to this trend, but there were no significant difference among the mulching treatment groups. The glucose level of fruit juice was much higher in the mulching treatment groups as compared with that of the control group, but there was no significant difference among the mulching treatments. Fructose content in the treatment of the micro-perforated vinyl sheets a 0.31mg%.m $L^{-1}$ increase over the control group. This group also showed a 1.36%.m $L^{-1}$ increase in sucrose and a similar increase trend in total sugar. The Brix value was 0.9 $^{\circ}$Brix higher in the micro-perforated vinyl sheet group(12.4 $^{\circ}$Brix) than in the control group(11.5 $^{\circ}$Brix) which result in a significant increase with micro-perforated vinyl sheet usage. However, the acidity level did not differ significantly among mulching treatments.

  • PDF

Strut-Tie Models and Load Distribution Ratios for Reinforced Concrete Beams with Shear Span-to-Effective Depth Ratio of Less than 3 (I) Models and Load Distribution Ratios (전단경간비가 3 이하인 철근콘크리트 보의 스트럿-타이 모델 및 하중분배율(I) 모델 및 하중분배율)

  • Chae, Hyun-Soo;Yun, Young Mook
    • Journal of the Korea Concrete Institute
    • /
    • v.28 no.3
    • /
    • pp.257-265
    • /
    • 2016
  • The failure behavior of reinforced concrete beams is governed by the mechanical relationships between the shear span-to-effective depth ratio, flexural reinforcement ratio, load and support conditions, and material properties. In this study, two simple indeterminate strut-tie models which can reflect all characteristics of the failure behavior of reinforced concrete beams were proposed. The proposed models are effective for the beams with shear span-to-effective depth ratio of less than 3. For each model, a load distribution ratio, defined as the fraction of load transferred by a truss mechanism, is also proposed to help structural designers perform the rational design of the beams by using the strut-tie model approaches of current design codes. In the determination of the load distribution ratios, the effect of the primary design variables including shear span-to-effective depth ratio, flexural reinforcement ratio, and compressive strength of concrete was reflected through numerous material nonlinear analysis of the proposed indeterminate strut-tie models. In the companion paper, the validity of the proposed models and load distribution ratios was examined by applying them to the evaluation of the failure strength of 335 reinforced concrete beams tested to failure by others.

Considerations on Wolfgang Weingart's Typography based on Syntactic Characteristics (볼프강 바인가르트의 구문론적 특성에 의한 타이포그래피 고찰)

  • Huh, Jin
    • The Journal of the Korea Contents Association
    • /
    • v.12 no.7
    • /
    • pp.86-93
    • /
    • 2012
  • The foundation of the development in modern typography is based on the era of International Typographical Style and Modern Typography that valued morphological functionality and rationality to achieve an accurate conveyance of meaning. However, with the advance of postmodernism, the view that the aesthetic and conceptual aspect must be included in its interpretation rather than its rational functionality was prominent. Indeed, the works of Dan Friedman and April Greiman, two graphic designers that are known to be the most representative of the post-modernistic era, displayed that graphic design works can also serve as a method for a more free artistic expression, unlike works of Modern Typography. This move towards aesthetic graphics was first started by Wolfgang Weingart. His various attempts at expanding the concept of typography had a significant impact on the development of New Wave and his experimentalist attitude brought about a ground-breaking change to the functional design and formative expression of modern typography. However, this thesis will consider the theoretical background of the typographical designs displayed in Wiengart's works and the experimental methods thereof, and will not attempt to evaluate Weingart's pioneering role and achievements. Furthermore, this thesis will shed new light on the argument that the Weingart's works are not based on the authorship view of post-modernistic typography and are rather utilized to expand the concept of typography based on a syntactical approach.

Load Distribution Ratios of Indeterminate Strut-Tie Models for Simply Supported RC Deep Beams - (II) Validity Evaluation (단순지지 RC 깊은 보 부정정 스트럿-타이 모델의 하중분배율 - (II) 적합성 평가)

  • Kim, Byung Hun;Jeung, Chan Haek;Yun, Young Mook
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.2A
    • /
    • pp.269-279
    • /
    • 2008
  • In this study, the ultimate strengths of 229 simply supported reinforced concrete deep beams tested to shear failure were evaluated by the ACI 318-05's strut-tie model approach implemented with the presented indeterminate strut-tie model and its load distribution ratio. The ultimate strengths of the deep beams were also estimated by the experimental shear equations, design codes that were based on experimental and theoretical shear strength models, and current strut-tie model design codes. The validity of the present strut-tie model and its load distribution ratio was examined through the comparison of the strength analysis results classified according to the prime design variables of the shear span-to-effective depth ratio, flexural reinforcement ratio, and compressive strength of concrete.

역사 속으로 - ABO식 혈액형분류법을 발견한 카를 란트슈타이너

  • Choe, Yong-Gyun
    • 건강소식
    • /
    • v.34 no.6
    • /
    • pp.38-39
    • /
    • 2010
  • 20세기 초반까지 수혈을 받는 수술 환자가 아무리 수술이 잘 되어도 죽는 경우가 다반사였다. 이때까지만 해도 혈액형이라는 개념이 없어 혈액형에 무관하게 수혈이 이뤄졌기 때문이다. 한 마디로 재수 좋으면 같은 혈액형을 수혈 받고, 재수 없으면 다른 혈액형을 수혈 받는 로또식 수혈이었던 것이다. 로또식의 수혈에서 벗어나 수술의 성공확률을 획기적으로 높인 사람이 있었으니 그가 바로 ABO식 혈액형분류법을 개발한 카를 란트슈타이너(Karl Landsteiner)이다. ABO식 혈액형분류법의 발견은 오늘날까지 이어지고 있는 수혈요법의 틀을 구축했다는데 큰 의의가 있으며, 란트슈타이너는 이 혈액형분류법의 개발로 1930년 노벨의학상을 수상했다.

  • PDF

국내ㆍ외(고부가) 타이어 시장 전망

  • Lee, Seung-Jae
    • The tire
    • /
    • s.228
    • /
    • pp.30-33
    • /
    • 2006
  • 우리나라는 세계5위의 타이어생산국으로 국내 타이어시장은 2010년까지 생산과 수요는 증가할 것이지만 성장률은 연평균3% 이내로 정체될 전망이다. 세계 타이어시장 성장률도 3% 수준에서 정체될 것으로 보이는 상황에서 천연고무 가격급등, 유가인상 등으로 경영환경이 악화되고 있으며 , 이를 극복하기 위해 국내외 타이어업체들은 마진율이 높은 고부가타이어의 매출비중을 적극적으로 확대하고 있는 상황이다. 세계 타이어시장은 상위 12개 업체가 과점하고 있으며, 같은 성능과 품질이라도 브랜드파워와 판매네트워크의 차이로 뚜렷한 가격 차이를 보이고 있다. UHPT의 경우 국내업체제품은 선진업체에 비해 40% 할인된 가격에 판매되지만 , 일반타이어를 중심으로 가격차이가 2010년까지 15% 이내로 좁혀질 전망이다.

  • PDF

Fabrication of Superhydrophobic TiO2 Films without Color Alternation (색 변화 없는 초소수성 타이타늄 산화막 제조)

  • Kim, Seon-Gyu;Choe, Jin-Seop
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2015.11a
    • /
    • pp.339-339
    • /
    • 2015
  • 타이타늄을 2단계로 양극산화하여 색을 유지하며 표면에 튜브형태를 갖는 산화막을 제조하였다. 타이타늄을 양극산화 시, 전해질 농도, 양극산화 전압, 시간 등에 따라 다양한 색을 띄게 되는데, 기름기 등의 오염물질로 인한 색 변화, 내 지문성 등의 문제가 유발된다. 이에 타이타늄을 양극산화하여 나노튜브를 성장시킨 후, 기존 산화막 제조와 같은 조건으로 다시 양극산화하였다. 그 결과 기존 barrier 형태의 산화막 색이 구현되면서, 표면의 돌기형태에 따른 접촉각이 변화하게 되었다.

  • PDF

83년도 미국의 타이어 시장

  • Korea Tire Manufacturers Association
    • The tire
    • /
    • s.111
    • /
    • pp.36-42
    • /
    • 1984
  • 본자료는 미국의 타이어 전문지인 「Modern Tire Dealer」에서 조사한, 83년도 미국의 타이어 산업 및 타이어시장 전반에 관한 실적분석이다. 83년도 미국 타이어업계의 수급실적을 보면, 승용차용 타이어의 총출하량은 178백만본으로 82년보다 약 9.2% 증가하였으며, 트럭ㆍ버스용 타이어의 총출하량도 3,470만본으로 82년보다 약 10.2% 증가되었다. 한편, 시장별로 보면 ,교환용 타이어시장에서는 승용차용이 134백만본으로 전년보다 약 3.1% 증가되었으며, 트럭ㆍ버스용은 2,950만본으로 전년보다 약 9.3% 증가하였다. 또 신차용 타이어시장에서는 승용차용이 44백만본으로 전년대비 33.3% 증가되었고, 트럭ㆍ버스용도 520만본으로 15.6% 증가하였다. 즉, 83년도 미국 타이어시장은 전반적으로 평균 약 9.4% 증가되었다.<편집자 주>

  • PDF

A Study on Contents for Appreciation Typography in Design Education (타이포그래피를 통한 디자인 학습 콘텐츠(contents) 연구)

  • Im, nam-sook
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2007.11a
    • /
    • pp.916-919
    • /
    • 2007
  • The study is proposed. to understand diverse elements including visual elements and context in typography; to get an overall perspective on various aspects of gestalt; and to develop contents for appreciation design, study which aims to help learners comprehend values.

  • PDF

'88년도 미국 타이어 시장현황

  • Lee, Seong-Eun
    • The tire
    • /
    • s.142
    • /
    • pp.30-38
    • /
    • 1989
  • 이 자료는 미국의 타이어 전문지인 「Modern Tire Dealer」에서 1988년도의 미국 타이어산업 및 타이어시장 전반에 관한 실적을 조사분석한 것이다. 이 자료에 나타난 1988년도 미국 타이어업계의 수급실적을 보면, 승용차용 타이어의 총출하량은 209.5백만개로 전년도보다 약 3% 증가하였으며, 트럭ㆍ버스용 타이어의 총출하량은 42.7백만개로 전년도보다 약 1% 증가하였다. 한편, 시장별로 보면, 교환용타이어시장에서는 승용차용이 150백만개로 전년도보다 약 3% 증가하였으며, 트럭ㆍ버스용은 34.3백만개로 전년도보다 오히려 약 1% 감소하였다. 그리고, 신차용 타이어시장에서는 승용차용이 53.5백만개로 전년도보다 약 1% 증가하였고, 트럭ㆍ버스용은 8.4백만개로 전년도보다 약 6% 증가하였다. 전반적으로 보아 1988년도의 미국 타이어시장의 수급실적은 전년도보다 약 2% 증가하였다.<편집자주>

  • PDF