DOI QR코드

DOI QR Code

Load Distribution Ratios of Indeterminate Strut-Tie Models for Simply Supported RC Deep Beams - (II) Validity Evaluation

단순지지 RC 깊은 보 부정정 스트럿-타이 모델의 하중분배율 - (II) 적합성 평가

  • Received : 2007.07.18
  • Accepted : 2007.09.11
  • Published : 2008.03.31

Abstract

In this study, the ultimate strengths of 229 simply supported reinforced concrete deep beams tested to shear failure were evaluated by the ACI 318-05's strut-tie model approach implemented with the presented indeterminate strut-tie model and its load distribution ratio. The ultimate strengths of the deep beams were also estimated by the experimental shear equations, design codes that were based on experimental and theoretical shear strength models, and current strut-tie model design codes. The validity of the present strut-tie model and its load distribution ratio was examined through the comparison of the strength analysis results classified according to the prime design variables of the shear span-to-effective depth ratio, flexural reinforcement ratio, and compressive strength of concrete.

본 논문에서는 전편논문에서 제안한 부정정 스트럿-타이 모델 및 하중분배율 결정식을 ACI 318-05 스트럿-타이 모델 설계기준에 적용하여 파괴실험이 수행된 229개 단순지지 철근콘크리트 깊은 보의 극한강도를 평가하였다. 또한 229개 깊은 보의 극한강도를 실험식, 실험 전단강도모델에 기초한 설계기준, 이론 전단강도모델에 기초한 설계기준, 그리고 현 스트럿-타이 모델 설계기준 등으로 평가하고, 그 결과를 본 연구의 방법에 의한 결과와 비교분석하여 본 연구에서 제안한 방법의 적합성을 검증하였다.

Keywords

References

  1. American Association of State Highway and Transportation Officials (2007) AASHTO LRFD Bridge Design Specifications, 2nd Edition, Washington, D.C., USA
  2. American Concrete Institute (1999) Building Code Requirements for Structural Concrete (ACI 318-99) and Commentary (ACI 318R-99), Farmington Hills, Michigan, USA
  3. American Concrete Institute (2005) Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05), Farmington Hills, Michigan, USA
  4. Cimite Euro-International du Beton (CEB)-Federation International de la Precontrainte (FIP) (1993) Model Code 1990, 1993, (MC90), Thomas Telford, London
  5. Eurocode2 (1992) Design of Concrete Strutcures, Part I: General rules and Rules for buildings(DD ENV 1992-1-1), Commission of the European Communities, UK
  6. The International Federation for Structural Concrete(fib) (1999) Structural Concrete; Textbook on Behavior, Design and Performance Updated Knowledge of the CEB/FIP Model Code 1999 Volume 3, The International Federation for Structural Concrete(fib), Lausanne, Switzerland
  7. Kong, P.Y.L. and Rangan, B.V. (1998) Shear Strength of High-performance Concrete Beams, ACI Structural Journal, Vol. 95, No. 6, pp. 677-688
  8. Oh, J.K. and Shin, S.W. (2001) Shear Strength of Reinforced Highstrength Concret Deep Beams, ACI Structural Journal, Vol. 98, No. 2, pp. 164-173
  9. Shin, S.W., Lee, K.S., Moon, J., and Ghosh, S.K. (1999) Shear Strength of Reinforced High-strength Concrete Beams with Shear Span-to-depth Ratios between 1.5 and 2.5, ACI Structural Journal, Vol. 96, No. 4, pp. 549-556
  10. Smith, K.M. and Vantsiotis, A.S. (1982) Shear Strength of Deep Beams, ACI Material Journal, Vol. 79, No. 3, pp. 201-213
  11. Tan, K.H., Kong, F.K., Teng, S., and Guan, L. (1995) High-strength Concrete Deep Beams with Effective Span and Shear Span Variations, ACI Structural Journal, Vol. 92, No. 4, pp. 572-582
  12. Tan, K.H., Kong, F.K., Teng, S., and Weng, L.W. (1997a) Effect of Web Reinforcement on High-strength Concrete Deep Beams, ACI Structural Journal, Vol. 94, No. 6, pp. 572-582
  13. Tan, K.H., Teng, S., Kong, F.K., and Lu, H.Y. (1997b) Main Tension Steel in High Strength Concrete Deep and Short Beams, ACI Structural Journal, Vol. 94, No. 5, pp. 752-768
  14. Tan, K.H. and Lu, H.Y. (1999) Shear Behavior of Large Reinforced Concrete Deep Beams and Code Comparisions, ACI Structural Journal, Vol. 96, No. 5, pp. 836-845
  15. Teng, S., Kong, F.K., Poh, S.P., Guan, L.W., and Tan, K.H. (1996) Performance of Strengthened Concrete Deep Beams Predamaged in Shear, ACI Structural Journal, Vol. 93, No. 2, pp. 159-171
  16. Vecchio, F.J. and Collins, M.P. (1986) The Modified Compression Field Theory for Reinforced Concrete Elements Subjected to shear, ACI Journal, Vol. 83, No. 2, pp. 219-231
  17. Zsutty, T.C. (1971) Shear Strength Prediction for Separate Categories of Simple Beam Tests, ACI Journal, Vol. 68, No. 2, pp. 138-143