• 제목/요약/키워드: 타이어/노면

검색결과 88건 처리시간 0.044초

타이어 구조 진동음에 관한 연구 (A Study on the tire structure-borne sound)

  • 지창헌
    • 한국음향학회지
    • /
    • 제14권2호
    • /
    • pp.80-91
    • /
    • 1995
  • 타이어와 노면의 상호작용에 의해 발생하는 소음에 대한 이론적인 모델에 대하여 연구하였다. 모델은 레디얼 타이어의 벨트 운동을 얇은 셀 방정식들로 가정하고 Bohm이 유도한 운동방정식을 기초로 하였으며 이들 방정식에 요구되는 구조적인량은 타이어의 재질적인 특성을 기초로 유도하였다. 타이어의 회전형태는 이들 방정식들의 정상상태로 부터 계산되고 진통 응답은 전체 종속적인 셀 방정식에 의해 구하였다. 타이어 노면 접지면에서의 힘은 타이어 트레드의 기하학적인 형상과 접지압의 분포를 기초로 계산하였고 소음방사는 심프슨 적분에 의해 계산된다. 여러가지 설계인자의 변화에 대한 효과를 조사하여 저소음 타이어 설계의 기초자료를 확보하는데 목적이 있다.

  • PDF

회전하는 타이어의 접지면 동특성 예측에 관한 연구 (A Study on Slow Rolling tire for Prediction of the Tire Forces and Moments)

  • 김항우;황갑운;조규종
    • 전산구조공학
    • /
    • 제10권2호
    • /
    • pp.161-169
    • /
    • 1997
  • 차량의 동적특성, 즉 소음, 진동, 승차감 및 조종안정성능 등에 중요한 영향을 미치는 부품중에 하나로 차체의 중량을 지지하고 노면과 접촉하여 회전하면서 조타성을 지니는 타이어를 고려하지 않을 수 없다. 지금까지의 이러한 타이어 최적설계에 이용되어지고 있는 예측기법으로는 유한요소해석 방법이 널리 활용되어 지고 있으나, 이는 타이어에 공기압 주입 및 차량의 조종안정성능이 우수한 타이어 제품개발 및 개선을 위해 차량 주행시 타이어와 노면과의 접지면에 작용하는 힘과 모멘트를 예측할 수 있는 유한요소해석 적용기법을 개발하였으며,이러한 해석기법을 통한 결과와 실측치는 매우 유사한 관계를 지니고 있음을 알 수 있었다.

  • PDF

포장노면 종류에 따른 타이어/노면 마찰 소음의 실험적 평가 (An Experimental Evaluation of Friction Noise between Road Surface and Tyre)

  • 김진형;최태묵;문성호;서영국;박준석;도천수;조대승
    • 한국소음진동공학회논문집
    • /
    • 제16권10호
    • /
    • pp.1067-1073
    • /
    • 2006
  • In this paper, we present noise measurement results of 8 vehicles. The measurement was done by a close proximity method attaching surface microphones on the test vehicle. For the 9 road surface types constructed at Korean highway test road, the vehicles were tested from 50 to 120 km/h at the interval of 10 km/h in normal steady state and inertia cruising conditions. Using the results, we evaluate and discuss the effect of vehicle noise generation depending on the different conditions for vehicle type, speed, road surface and loading condition, especially focused on friction noise between tyre and road surface.

포장노면 종류에 따른 타이어/노면 마찰 소음의 실험적 평가 (An Experimental Evaluation of Friction Noise between Road Surface and Tyre)

  • 김진형;조대승;최태묵;문성호;서영국;박준석;도천수
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 춘계학술대회논문집
    • /
    • pp.428-433
    • /
    • 2006
  • In this paper, we present noise measurement results of 8 vehicles. The measurement was done by a close proximity method attaching surface microphones on the test vehicle. For the 9 road surface types constructed at Korean highway test road, the vehicles were tested from 50 to 120 km/h at the interval of 10 km/h in normal steady state and inertia cruising conditions. Using the results, we evaluate and discuss the effect of vehicle noise generation depending on the different conditions for vehicle type, speed, road surface and loading condition, especially focused on friction noise between tyre and road surface.

  • PDF

타이어/노면에 대한 Pass-by Noise 특성 연구 (A Study on Pass-by Noise Performance for Tire/Road)

  • 강영규;오약전
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 춘계학술대회 논문집
    • /
    • pp.462-465
    • /
    • 2014
  • It is well known that tire/road factors have a large influence on overall tire performance. In this paper, the basic study on the effects of tire/road factors on the pass-by noise performance of tire labeling has been carried out through experimental tests. The tire pass-by noise is affected by road characteristic factors, especially greatly influenced by road friction coefficient, and the next dominant factor is road chipping size. For several authorized pass-by noise test tracks, the pass-by noise correlation test has been done to know the test site effect, which results in 2~3dB(A) variation of pass-by noise level. Finally, it is shown that the winter tire is differently influenced by the pass-by noise test track characteristics, as compared to all-season tire and summer tire.

  • PDF

마모 타이어로 인한 교통사고의 분석 및 대책(상)

  • 대한타이어공업협회
    • 타이어
    • /
    • 통권104호
    • /
    • pp.8-16
    • /
    • 1983
  • 타이어가 마모되면 미끄러지기 쉬울뿐 아니라, 위험하다. 특히 과마모된 타이어가 젖은 노면을 주행하게 되면 ,정지거리가 길어지든가 또는 옆으로 미끄러지기 쉬우므로 위험하며, 또 타이어의 수상활주현상(Hydroplaning)이 일어나기 쉽다. 그러므로 본고에서는 날로 더해가는 교통량의 증가로 과마모타이어의 사용률이 늘어나게 됨으로써 교통사고와 직결되는 타이어의 위험부담을 조금이라도 줄여보고자 타이어로 인한 교통사고의 원인분석과 그 대책을 살펴본 것이다. 특히 본고에서는 일본의 전국 교통사고분석관회의에서 발표된 보고서의 자료를 인용하여 마모타이어와 교통사고의 연관성을 분석해 본 것이다. 따라서 본자료는 처음부터 완전한 것은 아니며 앞으로도 계속 연구할 필요가 있을 것으로 보며, 이 기회에 관련업체는 물론, 관계기관에서도 마모타이어로 인한 사고를 미연에 방지할 수 있는 적극적인 대책을 강구해 줄 것을 진심으로 바라는 바이다.<편자 주>

  • PDF

타이어 뉴메틱 트레일 정보를 활용한 횡방향 타이어 노면 마찰 계수에 관한 연구 (A Study on Lateral Tire-road Friction Coefficient Estimation Using Tire Pneumatic Trail Information)

  • 한경석;최세범
    • 한국자동차공학회논문집
    • /
    • 제24권3호
    • /
    • pp.310-318
    • /
    • 2016
  • The demands for vehicle safety systems such as ABS and ESC have been increased. Accurate vehicle state estimation is required to realized the abovementioned systems and tire-friction coefficient is crucial information. Estimation of lateral tire-road friction coefficient using pneumatic trail information is mainly dealt in this paper. Pneumatic trail shows unique characteristics according to the wheel side slip angle and these property is highly sensitive to vehicle lateral motion. The proposed algorithm minimizes the use of conventional tire models such as magic formula, brushed tire model and Dugoff tire model. The pure side slip maneuver, which means no longitudinal dynamics, is assumed to achieve the ultimate goal of this paper. A simulation verification using Carsim and Simulink is performed and the results show the feasibility of the proposed algorithms.

활주 직전과 제동 직전 속도의 상관관계 규명에 관한 연구 (Relationships Between Pre-Skidding and Pre-Braking Speed)

  • 류태선;전진우;박홍한;이수범
    • 대한교통학회지
    • /
    • 제27권1호
    • /
    • pp.43-51
    • /
    • 2009
  • 이 논문은 타이어-노면간 마찰계수(drag factor)와 노면에 발생된 스키드마크를 통해 제동직전 속도(pre-braking speed) 산정을 정확하게 하기 위한 방법론을 제시하고자 한다. 제동직전 속도(pre-braking speed)와 활주직전 속도(pre-skidding speed)간 어떠한 상관관계가 있는지 판단하기 위해 실차 주행 및 제동실험을 통해 데이터가 수집되었다. 두 대의 차량에 fifth wheel(오륜) 장비, 스피드건, vericom 2000 등 다양한 측정장비를 탑재하여 제동실험이 수행되었으며, 자동차 속도, 제동거리, 활주거리, 감속도 등이 정밀 측정되었다. 실험자료의 분석을 통해 노면 마찰계수값과 활주직전 속도를 산정하고, 이후 활주직전 속도와 제동직전 속도를 비교하여 이들간의 상관관계를 규명하였다. 결과적으로 산정된 마찰계수값은 현재 일반적으로 적용되고 있는 0.8보다 높았으며, 제동직전 속도는 활주직전 속도보다 $5{\sim}10km/h$ 정도 높은 것으로 나타났다. 향후에는 다양한 차종과 노면조건에 대한 후속실험을 통해 더욱 정교한 한국형 분석모형의 개발과 실무적용이 필요할 것으로 판단된다.

실차 실험을 통한 제동순시간에 의한 타이어-노면마찰계수에 관한 연구 (An Experimental Study of Tire-Road Friction Coefficient by Transient Brake Time)

  • 한창평;박경석;최명진;이종상;신운규
    • 한국정밀공학회지
    • /
    • 제24권7호
    • /
    • pp.106-111
    • /
    • 2007
  • In this paper, the transient brake time was studied on the van type vehicle with accelerometer. Experiments were carried out on the asphalt(new and polished), unpacked road(earth and gravel) and on wet or dry road conditions. The transient brake time is not effected bzy the vehicle speed. The transient brake time is about 0.41$\sim$0.43second on the asphalt road surface and the error range is within 0.1$\sim$0.16second. For the asphalt road condition, the transient brake time is not effected by both new asphalt road surface and the polished asphalt road surface. With compared by dry and wet road surface condition, the transient brake time of wet condition is longer than dry road condition and compared with unpacked road condition and packed road condition, unpacked road condition is shorter than packed road condition. It is considered that the transient brake time is effected by the road surface fraction coefficient. In other words, the transients brake time increases as friction coefficient decreases.

휠 슬립 제어를 위한 타이어와 노면 사이의 타이어 제동력 및 노면 마찰계수 추정 (Estimation of Tire Braking Force and Road Friction Coefficient Between Tire and Road Surface For Wheel Slip Control)

  • 홍대건;허건수;윤팔주;황인용
    • 대한기계학회논문집A
    • /
    • 제28권5호
    • /
    • pp.517-523
    • /
    • 2004
  • Recently, wheel slip controllers with controlling the wheel slip directly has been studied using the brake-by-wire actuator. The wheel slip controller is able to control the braking force more accurately and can be adapted to various different vehicles more easily than the conventional ABS systems. The wheel slip controller requires the information about the tire braking force and road condition in order to achieve the control performance. In this paper, the tire braking forces are estimated considering the variation of the friction between brake pad and disk due to aging of the brake, moisture on the contact area or heating. In addition, the road friction coefficient is estimated without using tire models. The estimated performance of tire braking forces and the road friction coefficient is evaluated in simulations.