• 제목/요약/키워드: 타원형 후류

검색결과 12건 처리시간 0.025초

메쉬 스크린 후류의 난류유동 특성에 관한 실험적 연구 (An Experimental Study on Turbulent Characteristics in the Wake of Mesh-Screens)

  • 강신형;이현구;전우평
    • 대한기계학회논문집
    • /
    • 제15권1호
    • /
    • pp.274-284
    • /
    • 1991
  • 본 연구에서는 몇가지 단순한 스크린의 형상에 대하여 후류의 난류 특성치들 을 계측하여, 실제 현상을 파악하고 자료를 확보하여 앞으로의 연구에 활용하고자 하 였다.본 논문에서는 원형 스크린과 타원형 스크린을 기본 형상으로 택하여, 저항 계수를 변화시키면서, 후류유동장에서 평균속도 분포, 난류 운동에너지, 난류 전단응 력을 열선 풍속계로 계측하였다. 원형 스크린의 경우에는 주로 스크린의 모서리에서 발달하는 전단층의 확산과정을 연구하였고, 타원형 스크린의 경우에는 평균속도 분포 가 하류로 가면서 원형 후류로 발전되어가는 과정을 연구하였다.

이차원 타원형 날개꼴의 실속제어에서 간헐제트 브로잉의 효과 (Effects of Pulsating Jet Blowing on Stall Control of Two Dimensional Elliptic Airfoil)

  • 이기영;손명환;정형석
    • 한국항공우주학회지
    • /
    • 제33권9호
    • /
    • pp.1-8
    • /
    • 2005
  • 이차원 타원형 날개꼴에서 펄스제트 브로잉에 의한 박리 제어 효과에 대하여 연구하였다. 박리 유동의 능동제어기술 개발을 위하여 압축공기를 사용하는 연속제트/간헐제트 엑츄에이터를 설계제작하여 타원형 날개 풍동 실험 모델에 장착하였다. 아음속 유동에서 날개 주위 유동장의 PIV 측정과 유동의 가시화을 통하여 간헐제트 브로잉의 타원형 날개의 실속제어 효과와 실용성에 대해 실험연구를 수행하였다. PIV 실험 결과 제트 브로잉에 의해 난류 후류 영역과 박리 버블의 크기를 현저하게 감소시킴으로써 박리제어가 가능함을 보였다. 간헐제트는 연속제트보다 박리제어에 보다 효과적이었다. 간헐제트의 주파수를 증가시키면 보다 높은 받음각에 이르기까지 난류 박리 후류를 효과적으로 억제할 수 있었다.

진동하는 타원형 에어포일의 근접후류 특성 연구 (An Experimental Study of the Near-Wake Characteristics of an Oscillating Elliptic Airfoil)

  • 장조원;손명환;은희봉
    • 대한기계학회논문집B
    • /
    • 제27권3호
    • /
    • pp.334-346
    • /
    • 2003
  • An experimental study was carried out to investigate near-wake characteristics of an elliptic airfoil oscillating in pitch. The airfoil was sinusoidally pitched about the half chord point between -5$^{\circ}$and +25$^{\circ}$angles of attack at the freestream velocities of 3.4 and 23.1 m/s. The corresponding Reynolds numbers based on the chord length were 3.3$\times$10$_{4}$ and 2.2$\times$10$^{5}$ , respectively. A hot-wire anemometer was used to measure the near-wake flow variables at the reduced frequency of 0.1. Ensemble-averaged velocity and turbulence intensity profiles were presented to examine the near-wake characteristics depending on the Reynolds number. The axial velocity deficit in the near-wake region tends to decrease with the increase in the Reynolds number as found in many stationary airfoil tests. Turbulence intensity in the near-wake region have a tendency to decrease with the -increase in the Reynolds number during the pitch-up motion, whereas it shows different feature during the pitch-down motion according to the separation characteristics.

논문 : 이산와류법을 사용한 지면근처에서의 2 차원 비정상 와류면 전개연구 (Papers : A Study on the Evolution of 2-D Unsteady Vortex Sheets in Ground Effect Using a Discrete Vortex Method)

  • 한철희;조진수
    • 한국항공우주학회지
    • /
    • 제30권3호
    • /
    • pp.57-63
    • /
    • 2002
  • 지면효과를 받는 와류면의 2차원 비정상 전개를 이산와류법을 사용하여 연구하였다. 와류면이 말리는 정확한 형상을 얻기 위하여, 두 개의 평활기법을 비교하였다. 타원형 하중분포를 가지는 지면가까이에 있는 날개의 후류말림에 대하여 본 연구 방법을 적용하였다. 날개가 지면가까이 비행할 때, 지면효과로 인하여 와류가 날개길이방향으로 이동하였으며 날개익단부근에서 와류면의 늘림운동이 발생하였다.

경기만 조류성 사퇴위에 설치한 원등물체 주변 침식 및 퇴적현상 (Scour development around an artificial cylinder on tidal sand ridg in gyeonggi bay, Korea)

  • ;최진혁
    • 한국해양공학회지
    • /
    • 제6권2호
    • /
    • pp.10-20
    • /
    • 1992
  • 강조류하의 인공 구조물 주변 해저 침식 및 재퇴적 현상을 연구하기 위하여 1987년 8월 24일 부터 9월 26일 까지 경기만에 발달한 조류성 사퇴위에서 현장 실험을 실시하였다. 인공구조물(원통 물체) 주변에 발달한 침식 구조는 전체적으로는 타원형으로 접시모양을 하고 있으며, 후류 및 이차류에 의한 복합 침식작용에 의한 것으로 분석되었다. 아울러 연속적인 침식구조 크기 측정자료를 이용 산술적으로 침식율$(1.5-20m_3/day)$및 재퇴적율(0.13-0.18gr/cm/sec)를 추정하였다.

  • PDF

와사법을 이용한 타원판 후류의 전산 가시화 (Numerical Visualization of Three-Dimensional Flow Past an Elliptic Disk using Vortex Filament Method)

  • 안철오;이상환
    • 한국가시화정보학회:학술대회논문집
    • /
    • 한국가시화정보학회 2002년도 추계학술대회 논문집
    • /
    • pp.59-62
    • /
    • 2002
  • A study of three-dimensional unsteady incompressible flow past elliptic disk with aspect ratio 3 is presented. Numerical visualization using the vortex filament method was performed at Reynolds number of 20,000 on the basis of the minor diameter, the random walk method was used to calculate viscous diffusion effect. We suggest 3 stages about the wake development according to its structures, stability and motions and described the characteristics of each stages. The structure of the elliptic wake is more complicate and unstable than the wake behind a circular disk.

  • PDF

진동하는 타원형 에어포일의 근접후류 특성 연구 (An Experimental Study of the Near-Wake Characteristics of an Oscillating Elliptic Airfoil)

  • 장조원;손명환;은희봉
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.1795-1800
    • /
    • 2003
  • An experimental study was carried out to investigate near-wake characteristics of an elliptic airfoil oscillating in pitch. The airfoil was sinusoidally pitched about the half chord point between $-5^{\circ}C$ and $+25^{\circ}C$ angles of attack at the freestream velocities of 3.4 and 23.1 m/s The corresponding Reynolds numbers based on the chord length were $3.3{\times}10^4$ and $2.2{\times}10^5$, respectively. A hot-wire anemometer was used to measure the near-wake flow variable at the reduced frequency of 0.1. Ensemble-averaged velocity and turbulence intensity profile were presented to examine the near-wake characteristics depending on the Reynolds number. The axial velocity deficit in the near-wake region tend to decrease with the increase in the Reynolds number a found in many stationary airfoil test . Turbulence intensity in the near-wake region have a tendency to decrease with the increase in the Reynolds number during the pitch-up motion, whereas it shows different feature during the pitch-down motion either the laminar boundary layer or turbulent boundary layer separation.

  • PDF

앙각을 가진 타원형 실린더 후류와 평판 경계층의 상호작용에 대한 연구 (Interaction between Turbulent Boundary Layer and Wake behind an Elliptic Cylinder at Incidence)

  • 최재호;이상준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.465-471
    • /
    • 2000
  • The flow characteristics around an elliptic cylinder with axis ratio of AR=2 located near a flat plate were investigated experimentally to study the interaction between the cylinder wake and the turbulent boundary layer. The pressure distributions on the cylinder surface and on the flat plate were measured with varying the angle of attack of the cylinder. In addition, the velocity profiles of wake behind the cylinder were measured using a hot-wire anemometry As the angle of attack increases, the location of peak pressure on the windward and leeward surfaces of the cylinder moves toward the rear and front of the cylinder, respectively. At positive angles of attack, the position of the minimum pressure on the flat plate surface is moved downstream, but it is moved upstream at negative angles of attack. With increasing the angle of attack, the vortex shedding frequency is gradually decreased and the critical angel of attack exists in terms of the gap ratio. By installing the elliptic cylinder at negative angle of attack, the turbulent boundary layer over the flat plate is disturbed more than that at positive incidence. This may be attributed to the shift of separation point on the lower surface of the cylinder according to the direction of the angle of attack.

  • PDF

앙각을 가진 타원형 실린더 후류와 평판경계층의 상호작용에 대한 연구 (Interaction between Turbulent Boundary Layer and Wake Behind an Elliptic Cylinder at Incidence)

  • 최재호;이상준
    • 대한기계학회논문집B
    • /
    • 제24권7호
    • /
    • pp.976-983
    • /
    • 2000
  • The flow characteristics around an elliptic cylinder with axis ratio of AR=2 located near a flat plate were investigated experimentally to study the interaction between the cylinder wake and the turbulent boundary layer. The pressure distributions on the cylinder surface and on the flat plate were measured with varying the angle of attack of the cylinder. In addition, the velocity profiles of wake behind the cylinder were measured using a hot-wire anemometry As the angle of attack increases, the location of peak pressure on the windward and leeward surfaces of the cylinder moves toward the rear and front of the cylinder, respectively. At positive angles of attack, the position of the minimum pressure on the flat plate surface is moved downstream, but it is moved upstream at negative angles of attack. With increasing the angle of attack, the vortex shedding frequency is gradually decreased and the critical angle of attack exists in terms of the gap ratio. By installing the elliptic cylinder at negative angle of attack, the turbulent boundary layer over the flat plate is disturbed more than that at positive incidence. This may be attributed to the shift of separation point on the lower surface of the cylinder due to the presence of a ground plate nearby.

평판 가까이에 놓인 타원형 실린더 주위 유동에 관한 연구 (Flow Around an Elliptic Cylinder Placed Near a Plane Boundary)

  • 김성민;이상준
    • 대한기계학회논문집B
    • /
    • 제20권8호
    • /
    • pp.2637-2649
    • /
    • 1996
  • Flow characteristics and aerodynamic forces acting on an elliptic cylinder placed in a plane boundary layer were investigated experimentally. Four cylinder models with axis ratio(major axis to minor axis, AR=A/B) of 1, 2, 3, and 4 having the same equivalent diameter were used in this experiment. The Reynolds number based on the equivalent diameter $D_e$(=20mm) was 13,000. In the case of circular cylinder, regular vortex shedding occurs for the cylinder gaps larger than G/B=0.3 and is not almost related to the boundary layer thickness. But, for the elliptic cylinders, the vortex shedding frequency is increased with increasing the gap ratio (G/B) and the axis ratio (AR) of elliptic cylinders. The maximum drag coefficient acting on a circular cylinder is mainly affected by the boundary layer thickness. But, the elliptic cylinders(AR$\geq$2), except for the smaller gap G/B<0.2, show a nearly constant drag coefficient which is much smaller than that of a circular cylinder. The base pressure on the flat plate decreases with increasing the axis ratio(AR) of the elliptic cylinder. In the case of a circular cylinder, the base pressure has the minimum value at the gap ratio G/B=0.4, but it occurs at G/D=2 for elliptic cylinders. The mean velocity of the cylinder wake is quickly recovered at a small cylinder height ratio(H/$\delta$), but the turbulent intensity is rapidly recovered at a large cylinder height ratio(H/$\delta$). The effective wake region in the plane boundary layer is shrinkaged with increasing the axis ratio(AR) of elliptic cylinder. And the drag coefficient and streamwise turbulent intensity of the elliptic cylinder with AR=4 are less than half of those for the circular cylinder(AR=1).