• 제목/요약/키워드: 타액 pH

검색결과 65건 처리시간 0.03초

사료작물 사일리지의 단백질 분획 및 Borate-phosphate Buffer 추출이 In vitro 발효성상, Gas 발생 그리고 분해율에 미치는 효과 (Protein Fractionation of Whole Crop Silages, and Effect of Borate-phosphate Buffer Extraction on In vitro Fermentation Characteristics, Gas Production and Degradation)

  • ;김광림;지병주;;오영균;홍성구;송만강
    • Journal of Animal Science and Technology
    • /
    • 제51권5호
    • /
    • pp.369-378
    • /
    • 2009
  • 본 시험은 여러 종류(호밀, RS; 볏짚, RSS; 소맥, WS; 트리티케일, TS; 귀리, OS; 청보리, BS)의 사일리지를 대상으로 단백질을 분획(fractionation)하고, in vitro 방법으로 buffer 추출 전과 추출 후의 사일리지를 배양하였을 때 반추위 미생물에 의한 발효성상, 가스발생량 및 분해율을 조사하고자 실시되었다. 사일리지의 가용성 물질은 boratephosphate 용액으로 추출하였으며, 반추위액과 인공 타액이 동일한 비율로 구성된 배양액을 혐기적인 조건에서 48시간동안 배양($39^{\circ}C$)하면서 발효 성상과 nylon bag을 이용한 사일리지의 in vitro 분해율을 조사하였다. 사일리지의 soluble protein (SP) 함량은 RSS에서 총 CP 함량 중 2.11%로 가장 낮았으며, RS와 BS 및 OS에서는 7% 이상의 높은 함량을 보였다. 또한 A fraction (NPN)은 RS에서 총 CP의 74.33%로 가장 높았으나 TS 및 RSS의 NPN 함량은 48% 정도로 비교적 낮았다. Buffer 불용성 단백질(IP) 중 B2 fraction은 RS, RSS 및 WS에서 총 CP의 7% 이상으로 비교적 높았던 반면 TS (1.45%)와 BS (2.13%)에서 매우 낮았다. 이와는 달리 $B_3$ fraction은 WS (4%)를 제외하고는 다른 사일리지에서 5.99~15.20%의 함량을 보였다. 체내 이용성이 매우 낮은 C fraction은 볏짚 사일리지(RSS)에서 27.07%로 다른 종류의 사일리지(1.40~9.93%)에 비하여 현저히 높은 수준이었다. 배양 12시간 까지는 추출 전에 비하여 추출 후의 사일리지 배양액에서 pH가 높았으나 (P<0.01~P<0.001) 48시간에는 오히려 추출 전의 사일리지 배양액의 pH가 낮았다(P<0.01). 배양액의 ammonia-N는 모든 사일리지에서 추출 전의 농도가 추출 후의 농도에 비하여 현저히(P<0.01~P<0.001) 높았으나 사일리지 종류에 의한 영향을 받지 않았다. 모든 사일리지에서 추출 후에 비하여 추출 전의 VFA 농도가 현저히 증가되었다(P<0.01~P<0.001). Acetate의 조성 비율은 buffer 추출 전에 비하여 배양 24시간까지 추출 후 모든 사일리지에서 높았던 (P<0.01~P<0.001) 반면 propionate와 butyrate 비율은 배양 24시간까지 추출 전에 더 높았다(P<0.001). 배양 12시간까지는 buffer 추출 전의 사일리지로부터 더 많은(P<0.01~P<0.001) 양의 gas가 발생되었지만 그 후로(24~48시간)는 오히려 buffer로 추출된 후의 사일리지에서 발생량이 더 많았다(P<0.01). 추출 후에 비하여 추출 전 사일리지의 DM과 CP 분해율이 현저히(P<0.001) 높았으나 NDF 분해율의 경우 오히려 추출 후의 사일리지에서 높았다(P<0.001). 그러나 각 사일리지에 대한 buffer 추출 전 후의 평균치에서는 사일리지 간에 차이가 없는 것으로 나타났다. 본 시험의 결과로 미루어 보아 사일리지로 인해 현저히 증가된 NPN 함량이 사일리지의 단백질 이용율을 크게 낮출 것으로 보이며, 단백질을 포함한 buffer 가용성 물질은 사일리지의 초기 발효를 크게 촉진할 수 있는 것으로 여겨진다.

구취발생에 관여하는 구강내부요인에 관한 연구 (A study on the intraoral factor related to oral malodor)

  • 정미애;이은숙
    • 한국치위생학회지
    • /
    • 제8권1호
    • /
    • pp.119-131
    • /
    • 2008
  • This study was peformed in order to find out the relationship between the causing factors and the production of each gas 01 oral malodor, to contribute the oral malodor control at dental clinic as well as to establish the effective application of malodor control project for public oral health program 127 patients from 20 to 40 years old who had been visited for preventive dental cares were participated for the study. Such items as caries status, periodontal status, salivary flow, viscosity, pH. Snyder test, plaque deposit and tongue plaque were checked through the oral examination in order to find out the contributing factors Hydrogen sulfide, Methyl mercaptan, Di-methyl sulfide and Ammonia gas components were checked with Oral-Chroma and Attain, the oral malodor check units. Not only the corelation coefficiencies but also the multi-way variance analysis were calculated between each causing factor and each component of oral malodor gases to estimate the contributing factors of the oral malodor. 1. There was no relationship between the caries status and each component pf the oral malodor such as sulfur compound or Ammonia, both in laboratory test and VAS test (pF0.05). It revealed negative relationship between Hydrogen sulfide and FT(rM-0.1904. pE0.05) as well as the VAS and FT (rM-0.210. pE0.05). S0, it was estimated that the less oral malador was recognized when caries state changed to filled state in Hydrogen sulfide laboratory test or VAS test 2. High relationship was showed between salivary flow and Hydrogen sulfide (rM-0.183, pM0.039), Methyl mercaptan(rM-0.234, p-0.008). Dimethyl sulfide(rM-0.234, pM0.008) and Ammonia(-0.361. pM0.001) gas(pE0.05). 3. There was a high relationship between M-PHP(Modified-Patient Hygiene Performance Index) and tong plaque all kinds of sulfide(rM0.249. pM0.005). Ammonia gas component(rM0.232, pM0.009). 4. It was found that considerable relationship was appeared between the periodontal status and Ammonia gas (rM0.274, pM0.002), so, it should be needed to control Ammonia. Such dental Cares as the prevention or early treatment of periodontal disease and the accelerating the salivary flow as well as reducing the amounts and activities of filament or spiral typed oral micro-organism were recommended for adults, not only for dental care program at the dental clinics but also for public health programs, in order to promote the oral health and quality of file for individual and community peoples.

  • PDF

불소 민감성 Streptococcus mutans와 불소 저항성Streptococcus mutans의 우식원성 특성 비교 (Comparison of Cariogenic Characteristics between Fluoride-sensitive and Fluoride-resistant Streptococcus mutans)

  • 옹승환;김종수;백동헌;유승훈
    • 대한소아치과학회지
    • /
    • 제47권4호
    • /
    • pp.397-405
    • /
    • 2020
  • 이 연구의 목적은 불소 민감성(fluoride-sensitive) Streptococcus mutans (FS S. mutans ) 와 불소 저항성(fluoride-resistant) Streptococcus mutans (FR S. mutans )의 우식원성 특성을 비교하는 것이다. S. mutans ATCC 25175 균주를 NaF (70 ppm)를 포함한 trypticase soy broth에서 40일 동안 배양하여 FR S. mutans를 획득하였다. 2% 자당 유무에 따른 FS와 FR S. mutans의 성장과 산 생성 변화를 비교하였고, 타액 세균을 이용하여 FS와 FR S. mutans 바이오필름을 형성하여 공초점 레이저 현미경으로 관찰하고 세균 수를 측정하였다. 또한 RT-PCR을 통해 FS와 FR S. mutans의 gtf 유전자 발현 정도를 비교하였다. FR S. mutans는 FS S. mutans 보다 자당을 이용한 성장과 산 생성이 모두 낮았다. 타액 세균과 단일 균주 바이오필름의 형성 또한 FR S. mutans가 FS S. mutans 보다 적었고, 더 낮은 gtfB, gtfC 및 gtfD 발현을 보였다. 이 연구를 통해 FR S. mutans는 FS S. mutans 보다 감소된 우식원성 특성을 가지고 있음을 관찰하였고, 불소의 주기적 사용은 S. mutans 세균의 활성을 낮추어 우식 발생을 줄이는데 도움이 될 수 있을 것이다.

Self-etching primer를 이용하여 접착된 교정용 브라켓의 전단결합강도 (Shear bond strength of metal orthodontic brackets bonded with Self-Etching Primer)

  • 안윤표;김효영;전영미;김정기
    • 대한치과교정학회지
    • /
    • 제33권1호
    • /
    • pp.51-61
    • /
    • 2003
  • 본 연구는 6세대 교정용 접착 시스템인 Transbond Plus Self-Etching Primer(3M/Unitek Dental Products, Monorovia, Calif)를 이용하여 법랑질면에 브라켓을 접착하는 방법과, 통상적인 산부식 방법에 의해 브라켓를 접착한 경우의 전단결합강도 차이를 비교$\cdot$평가하고, self etching primer를 이용하여 브라켓을 접착할 때 치면에 존재하는 수분이 브라켓의 저단결합강도에 미치는 영향에 관하여 조사하였다. $37\%$ 인산용액과 Self-Etching Primer를 이 용하여 법랑질을 표면 처 리하고 Transbond XT를 이 용하여 브라켓을 치면에 부착하였다. 또한 수분의 존재에 따른 전단결합강포의 차이를 평가하기 위해 인공타액을 치면예 도보후 Self-Etching Primer를 사용하여 브라켓을 부착한 후 30분과 24시간에 따른 전단결합강도를 비교 평가하여 다음과 같은 결론을 얻었다. 1. Self-etching primer군에서 건조군과 습윤군의 전단결합강도는 $37\%$인산처리군의 결합강도보다 낮았다(p<0.05). 그러나 Self-etching primer군의 전단결합강도는 일상적으로 유용한 수준의 이상이었다. 2. 모든군에서 24시간군의 전단결합강도가 30분군의 전단결합강도보다 높았으며 (p<0.05), 이는 브라켓 접착후 일정시간의 경과가 결합강도를 증가시켜 줌을 알 수 있었다. 3. Self-etcing primer군에서 습윤군의 전단결합강도는 건조군보다 높은 경향이었으나 통계적 유의성은 인정되지 않았다(P>0.05). 4 ARI 점수의 비교결과 인산처리군에서는 0점과 1점의 빈도가 높았으며, Self-etching primer 건조군과 습윤군에서는 2점과 3점의 빈도가 높아(p<0.05) Self-etching primer군이 인산처리군보다 법랑질-레진 접착계면부위에서의 파절이 많이 일어남을 알 수 있었다.

Silver diamine fluoride와 sodium fluoride (NaF) 바니쉬의 법랑질 인공우식병소 재광화 효과 (Effect of Silver Diamine Fluoride and Sodium Fluoride Varnish on Remineralization in Artificially Induced Enamel Caries: An in vitro Study)

  • 김소영;이상호;이난영;지명관
    • 대한소아치과학회지
    • /
    • 제47권3호
    • /
    • pp.266-276
    • /
    • 2020
  • 이 연구의 목적은 법랑질 인공우식병소에서 silver diamine fluoride (SDF)와 sodiun fluoride (NaF) 바니쉬의 재광화 효과를 비교하는 것이다. 소의 절치를 이용해 인공적으로 법랑질 초기 우식병소를 형성하고 38% SDF와 5% NaF 바니쉬를 도포한 후 인공 타액에 3주동안 보관하면서 pH-cycling을 시행하여 법랑질 표면과 3개 층의 깊이에서 micro-CT를 이용하여 무기질 밀도를 측정하고 SEM-EDS를 이용하여 법랑질 표면의 미세구조를 분석함으로써 두 제제의 재광화 효과를 비교, 평가하였다. 38% SDF군와 5% NaF 바니쉬군 모두 탈회된 법랑질의 무기질 밀도와 정상수준으로 재광화된 법랑질의 부피는 시간 경과에 따라 21일까지 지속적으로 증가하였다. 38% SDF군은 5% NaF 바니쉬군보다 법랑질의 모든 깊이와 경과한 시간대에서 무기질 밀도 증가량(△HUV) 및 정상수준으로 재광화된 법랑질의 부피 모두 컸다(p = 0.001). SEM을 이용해 관찰한 재광화된 법랑질 표면은 38% SDF군이 5% NaF 바니쉬군에 비해 더 부드러웠다. SEM 사진상에서 38% SDF를 도포한 법랑질 표면에서 은 화합물 침착이 관찰되었으며 EDS 분석에서는 은 이온이 검출되었다. 이상의 연구 결과를 종합하면 38% SDF의 법랑질 인공우식병소에서의 재광화 효과는 5% NaF 바니쉬보다 더 큼을 알 수 있었으며 이러한 결과는 앞으로 SDF가 진행된 우식의 처치에 있어서도 중요한 역할을 할 수 있을 것으로 사료된다.

갑상선암 환자의 방사성옥소 치료 후 타액선 기능의 변동 (The Change of the Salivary Function after the High Dobe Radioiodine Treatment in the Patients with Differentiated Thyroid Cancer)

  • 임상무;홍성운;이진오;강태웅
    • 대한핵의학회지
    • /
    • 제23권1호
    • /
    • pp.7-12
    • /
    • 1989
  • The pain, swelling of salivary glands and dry mouth are not infrequent complication of the high dose radioiodine treatment in the patients with differentiated thyroid cancer. The purpose of this study was, by the dynamic salivary scintigraphy, to observe the change of the salivary function after the high dose $(150\sim200mci)$ radioiodine treatment. From May 1987 to April 1988, the dynamic salivary scintigraphy with 5mci of $^{99m}Tc-pertechnetate$ and gamma camera was performed before and 7 days after the radiolodine treatment in 7 patients with differentiated thyroid cancer. Just after the dynamic scintigraphy, the stimulation test with vitamin C solution of pH3.0 and poststirnulation scintigraphy were done, and the radioactivity uptake index, excretion fraction and salivary clearance after the stimulation were calculated for each gland. There was positive correlation between the radioactivity uptake index and excretion fraction after the stimulation. The salivary clearance after the stimulation was $18.96{\pm}8.95ml/min$ in the pretreatment state, and $14.37{\pm}7.7ml/min$ after the radioioine treatment. After the radioiodine treatment, the radioactivity uptake index, excretion fraction and salivary clearance after the stimulation were significantly reduced in the parotid glands, but only the excretion fraction was reduced in the submandibular glands. The more the pretreatment salivary clearance after the stimulation was, the % change after the treatment was smaller. Further studies on the relation between the radiation dose in the salivary glands and the change of their function, and the long-term observation for the recovery of function are expected.

  • PDF

인공타액에서 아말감의 부식거동에 관한 전기화학적 연구 (ELECTROCHEMICAL STUDY ON THE CORROSION BEHAVIOUR OF DENTAL AMALGAM IN ARTIFICIAL SALIVA)

  • 김영남;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제13권2호
    • /
    • pp.221-235
    • /
    • 1988
  • The purpose of this study was to observe characteristic properties through the polarization curves and EMPA images from 4 different types of amalgam obtained by using the potentiostats (EG & G PARC) & EPMA (Jeol JSM-35), to investigate the degree of corrosion of each phase of amalgam on the oxidation peak, and to identify corrosion products from the corroded amalgam by use of X-ray diffractometer(Rigaku). After each amlgam alloy and Hg were triturated as the direction of the manufacturer by means of the mechanical amalgamator(Shofu), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10mm in height and was condensed by means of routine manner. The specimen was removed from the mold and stored at room temperature for about 7 days. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to compare the corrosion behaviours of the amalgams in 0.9% saline solution(pH6.8~7.0) and artificial saliva (pH6.8~7.0) at $37^{\circ}C$. The open circuit potential was determined after 30 minutes' immersion of specimen in electrolyte and the potential scan was begun at the potential of 100mV cathodic from the corrosion potential. The scan rate was 1mV/sec and the surface area of amalgam exposed to the solution was 0.64$cm^2$ for each specimen. All the potentials reported are with respect to a saturated calomel electrode (SCE). EPMA images on the determined oxidation peaks of each amalgam in artificial saliva were observed. X-ray diffraction patterns of each sample were recorded before and after polarization in artificial saliva (Aristaloy, Caulk Spherical, Dispersalloy and Tytin: at +770mV, +585mV, +8.10m V and +680m V respectively) by use of a recording diffractometer. Nickel filtered Cu $K_{{\alpha}_1}$ radiation was used and sample was scanned at $4^{\circ}(2{\theta})/min.$ from $25^{\circ}$ to $80^{\circ}$. The following results were obtained. 1. Oxidation peak potential in artificial saliva shifted to more anodic direction than that in saline solution. 2. The corrosion potential of high copper amalgam was more anodic than the potential of low copper amalgam. 3. The current density was lower in artificial saliva than in saline solution. 4. One of the corrosion products, AgCl was identified by X-ray diffraction analysis. 5. ${\gamma}_2$ phase was the most susceptible to corrosion and e phase was stable in low copper amalgam and ${\eta}$' phase and Ag-Cu eutectic were susceptible to corrosion in high copper amalgam.

  • PDF

LC-MS/MS를 이용한 콘돔에 함유된 니트로사민류 농도 분석 (Analysis of Nitrosamines Concentration in Condom by using LC-MS/MS)

  • 박나연;김성민;정웅;고영림
    • 대한화학회지
    • /
    • 제62권3호
    • /
    • pp.181-186
    • /
    • 2018
  • 니트로사민류는 이차아민과 아질산이 니트로소화 반응을 통해 생성되는 화합물이며, 고무의 가공시 가황과정을 거치면서 생성되는 것으로 밝혀졌다. 최근 고무제품 중에서 니트로사민류가 검출되면서 큰 이슈가 되고 있다. 콘돔은 인체에 삽입되는 일회용 의료기기로써 피부 및 점막에 직접 접촉하므로 안전성이 매우 중요하다. 이에 본 연구에서는 ISO 29941 방법을 준용하여 콘돔 중 니트로사민류의 분석법을 개발하였다. 콘돔 시료를 증류수에 넣어 용출시키고, 용출액에서 분석대상 물질을 추출하기 위해 디클로로메탄으로 액체-액체 추출을 실시하였으며, 농축 후 LC-MS/MS에서 정량분석하였다. 분석법의 정확도는 85.8~108.7%, 정밀도는 11.5% 이하, 검출한계는 0.11(NDPA, NDBA) ~ 0.48(NPYR) ng/mL이었다. 31건의 콘돔시료 중에서 증류수 용출에 의해 검출된 물질은 NDBA 2건이었고, 인공타액(pH 4.5) 용출로 검출된 물질은 NDMA 1건, NDEA 4건, NDBA 26건이었다. 니트로사민류의 총량은 모든 시료에서 $500{\mu}g/kg$을 초과하지 않았다.

QLF(Quantitative light-induced fluorescence)를 이용한 글라스 아이오노머 수복물의 인접면 우식 재광화 효과에 관한 연구 (REMINERALIZATION EFFECT OF INTERPROXIMAL CARIES ADJACENT TO GLASS IONOMER RESTORATIONS: IN VITRO STUDY USING QLF)

  • 이혁상;현홍근;장기택
    • 대한소아치과학회지
    • /
    • 제38권3호
    • /
    • pp.244-249
    • /
    • 2011
  • 글라스 아이오노머 시멘트는 초기 우식 치질에 재광화 효과가 있다고 알려져 있다. 본 연구에서는 시판되고 있는 세 가지 종류의 글라스 아이오노머 시멘트(Fuji IX $GP^{TM}$, $Vitremer^{TM}$, $F2000^{TM}$)를 실험군으로, 복합 레진(Filtek $Z250^{TM}$)을 대조군으로 사용하여 3개월간 인접면 우식증에 대한 재광화 효과를 시편의 파괴 없이 1개월 간격으로 QLF로 시편의 상을 얻고, 이렇게 얻은 상의 무기질 소실량(${\Delta}Q$)을 측정하여 ${\Delta}Q$의 변화량을 계산하여 시편의 재광화 정도를 평가하였다. 인접면 수복물은 인공 우식 병소가 있는 치아 시편과 수복재료(세 가지 글라스 아이오노머 및 복합 레진)를 접촉시켜 재현하였고, 이것을 인공 타액에 완전히 잠기도록 하여 pH 7.0, $37^{\circ}C$를 유지하였다. 치아 시편들은 실험 시작 후 30, 60, 90일 뒤에 꺼내어 QLF로 촬영하였다. 얻어진 영상을 QLF를 이용하여 시편 각각의 무기질 소실량(${\Delta}Q$)을 측정하였고, ${\Delta}Q$의 변화량(${\Delta}{\Delta}Q$), 즉 무기질 소실 변화량을 계산하여 얻어진 값을 ANOVA로 분석하고, Dunnett C multiple comparison test로 사후 검정을 시행하여 다음과 같은 결과를 얻었다. 1. 모든 군에서 병소의 무기질 소실량(${\Delta}Q$)이 증가하였다. 2. 무기질 소실량(${\Delta}Q$)의 변화량인 무기실 소실 변화량(${\Delta}{\Delta}Q$)은, 1 개월 후에는 글라스 아이오노머 시멘트가 복합레진에 비해 유의하게 컸으며(p<0.05), 글라스 아이오노머 중에서는 Fuji IX $GP^{TM}$$Vitremer^{TM}$, $F2000^{TM}$에 비해 유의하게 컸다(p<0.05). 2 개월 후에는 Fuji IX $GP^{TM}$가 나머지 군에 비해 ${\Delta}{\Delta}Q$가 유의하게 컸으며(p<0.05), 3 개월 후에는 모든 군간에 ${\Delta}{\Delta}Q$의 유의한 차이가 없었다. 3. 세 가지 글라스 아이오노머 시멘트에서 무기실 소실 변화량(${\Delta}{\Delta}Q$), 즉 재광화 정도는 시간이 지날수록 점차 감소하였다. 4. 대조군인 복합 레진 군에서도 무기실 소실 변화량(${\Delta}{\Delta}Q$)은 증가하였다.

수종 치과용 광중합형 복합레진의 화학적 분해 (CHEMICAL DEGRADATION OF LIGHT-CURED DENTAL COMPOSITE RESINS)

  • 양규호;최남기;박미란;박은혜
    • 대한소아치과학회지
    • /
    • 제28권3호
    • /
    • pp.403-411
    • /
    • 2001
  • 이상적인 수복재료의 요건으로 치아의 저작기능과 심미성을 충분히 회복시킬 수 있는 물리적, 화학적 성질을 갖추는 동시에 생물학적인 적합성과 구강내 환경변화에 따른 내구성 등을 들 수 있다. 그러나 복합레진을 이용하여 치아를 수복하였을 때 수복물은 구강내에서 시간이 흐름에 따라 타액내에서 서서히 분해되고 교합력이나 음식물에 의해 마모되어가는 운명을 거친다. 본 연구에서는 현재 수복재료로서 많이 사용되고 있는 Definite($Degussa-H\ddot{u}ls$ AG, Germany). Revolution(Kerr, U.S.A.), Unifil(GC, Japan), Palfique(Tokuyama, Japan)의 4종의 복합레진을 알카리성 용액 (0.1N NaOH)에 보관하였을 때 각 제품의 분해저항성을 평가하고자 하였다. 각 제품당 3개의 시편을 제작하여 무게측정을 한 후 0.1N NaOH에 저장하여 $60^{\circ}C$에서 보관하였다. 2주 후 제거하여 HCl로 중화, 세척 후 $60^{\circ}C$에서 건조하였다. 무게손실, 표면하분해층 깊이, 용출된 Si농도를 기준으로 각 레진의 분해저항성을 평가하여 다음과 같은 결과를 얻었다. 1. 무게손실량은 Unifil에서 3.21%로 가장 높았으나 각각 제품간에 있어서의 차이를 보이지는 않았다. 2. 분해층 깊이는 $107.69\sim47.40{\mu}m$의 범위였고, Unifil, Palfique, Revolution, Definite 순으로 감소하였으며 Palfique, Definite를 제외한 다른 제품간에는 유의한 차이를 보였다(p<0.05). 3. Si 용출량은 Palfique가 8940.0ppm으로 가장 많은 용출량을 보였으며 Revolution과 Definite를 제외한 각 제품간에는 유의한 차이를 보였다(p<0.05). 4. 각 제품의 무게손실과 분해층 깊이 사이에는 높은 상관관계를 보였다(r=0.06, p<0.05). 5. 각 제품의 무게손실과 Si 용출량, 분해층 깊이와 Si 용출량 사이에는 유의한 상관관계를 보이지 않았다. 6. 주사전자현미경 관찰시 NaOH용액에 보관한 후 레진 기질과 필러 사이의 결합의 파괴를 관찰할 수 있었다.

  • PDF