• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.35-41
• /
• 2021

The purpose of this study was to investigate the effect of prop exercise convergence using vibration on batting speed and batting accuracy in elementary school baseball players. Three times a week for six weeks. The vibration exercise experimental group and the control group were divided into each twenty members. The experimental group performed vibration convergence prop exercise, and the control group performed general exercise. Batting speed and Batting accuracy were measured. The experimental and control groups showed significant differences in the groups of batting speed before and after intervention. There was significant difference between the batting accuracy in the comparison between the experimental group and the control group. Prop convergence vibration exercise may help to improve the batting speed and batting accuracy of elementary school baseball players. In the future, adult and sport injury patient are needed.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.137-142
• /
• 2023

In This paper, we propose a determine the correlation between bat swing speed and balance ability in elementary school baseball players. This study subjects were 40 subjects. Bat swing speed was measured using a zepp2baseball, and balance ability was measured using a biorescue. For the measurement of balance ability, eyes open surface·eyes open length·eyes open average speed·eyes close surface·eyes close length·eyes close average speed were measured. pearson's correlation analysis was used to analyze the correlation between bat swing speed and balance ability. There was a significant negative correlation between bat swing speed and eyes close surface (r=-0.366, p<0.05). There was a significant negative correlation between bat swing speed and eyes close length(r=-0.348, p<0.05). There was a significant negative correlation between bat swing speed and eyes close average speed(r=-0.455, p<0.01). Among them, eyes close average speed showed the highest correlation (p<0.01). These findings suggest that improvement of the balance ability has a positive effect on bat swing speed.

• Transactions of Materials Processing
• /
• v.1 no.2
• /
• pp.63-74
• /
• 1992

낙하햄머를 이용한 복잡형상의 다타격 단조(multi-blow forging)를 파동 방정식에 기초를둔 엑스플리시트 시간적분 유한요소법을 사용하여 해석하였다. 초기에 햄머가 일정속도로 단조 재료를 타격하고 그후 금형과 단조재료에 남아있는 탄성에너지에 의하여 금형이 단조재료로부터 완전히 분리될때 까지 계산을 수행한후 소성변형 만을 다음 타격시에 사용 하였다. 이러한 방법을 사용하여 원하는 형태가 이루어질때 까지 타격을 반복하였다. 마찰이 적을수록 그리고 햄머의 초기속도가 빠를수록 타격 효율이 증가함을 확인 하였다. 또한 일정 타격후 다이의 진동을 관찰할수 있었다.

• Tunnel and Underground Space
• /
• v.23 no.1
• /
• pp.42-53
• /
• 2013

The percussion rate and spacing of the button of drill bit are very important in maximizing the drilling efficiency. Therefore, a series of percussion tests using Hopkinson bar system was carried out to assess the fragmentation performance against the beat rate and spacing of a drill bit. First, single percussion test complemented with numerical simulation was performed to analyze rock fragmentation phenomenon and to describe the fragmentation process. Next, multiple percussion test that repetitively strike the rock sample moving at predetermined rate was carried out to predict drilling efficiency against the button spacing. After the tests, the fragmented volume of the rock was measured by laser scanner and the drilling performance was analyzed using the calculated percussive energy and measured negative volume. Based on the results, the single impact performance of drill bit with 102 mm diameter was predicted.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.90-90
• /
• 2017

생력화를 위한 구기자의 수확 기계화는 열악한 수확작업환경을 쾌적한 작업환경으로 개선하고 노동력 감소, 생산비 절감을 할 수 있다. 관행 손 수확과 진동 고리형 수확기 방법보다 높은 작업 능률 향상으로 영농규모의 확대 촉진 및 안정적인 영농 구조를 구축하여 재배농가의 생산비를 절감하여 경쟁력을 높일 수 있으며, 기존 인력에 의존하였던 수확작업을 기계화함으로서 전업농 및 대단위 경작이 가능하게 함으로서 국내에서 생산한 양질의 구기자를 국민에게 안정적으로 제공할 수 있다. 따라서, 본 연구는 구기자 수확작업의 생력화를 위하여 개발 보급된 수목형의 재배법 특성을 분석하고 이를 토대로 타격장치를 적용한 보행형 구기자 수확기를 개발하는데 목적이 있다. 수목형 구기자나무의 분지에 착과되어 있는 숙과를 주행하면서 탈과 할 수 있는 탈과 장치를 제작하기 위하여 타격형 탈과 장치를 3D 모델링 작업(Inventor V.11, Autodesk, USA) 후 시작기를 제작, 구기자 수확 시작기는 주행부, 타격장치, 집과부, 분지유인부로 구성하였다. 구기자 수확 시작기의 최대 높이는 형태학적 특성을 토대로 타격봉의 높이를 900 mm 이하로 제한하였으며, 조향장치의 높이는 800 mm로 하였다. 주행부는 구기자 재식 조사결과를 이용하여 고랑 폭 1,500 mm 이하에서 자유롭게 전 후진 이동이 가능하고 경사로 등을 주행 시에도 안전성을 높이기 위해 자동브레이크 기능이 있으며 타격장치의 타격 봉은 알루미늄 재질로 지름 100 mm, 길이 400 mm로 설계 제작하였으며, 구기자 분지 타격 시 분지와 타격 봉이 수직 상태로 타격이 가능하도록 제작, 집과장치는 포장의 두둑, 고랑은 일괄 표준화가 되어 있지않아 청양구기자시험장에서 측정한 재배법을 바탕으로 설계된 수집부 프레임의 적용범위는 폭 450 mm, 길이 720 mm, 높이 1,500 mm를 집과 범위로 하여 설계 제작하였다. 타격 방식을 적용한 구기자 수확기 성능평가 결과 조숙기에 30초 이상의 탈과 시 87.5 % 이상 탈과는 어려울 것으로 판단되었으며, 성숙기에는 타격시간에 관계없이 92 %의 매우 우수한 탈과율이 나타났다. 성숙기의 주행속도 48 m/h 일 때 탈과율과 집과율은 89 %, 92 %로 나타났다.단위작업시간당 최대 수확 능력은 관행작업 2.9 kg/hr, 진동고리형 수확기 5.2 kg/hr, 타격방식을 적용한 구기자 수확기는 최소 7.6 kg/hr, 최대 24.1 kg/hr로 관행작업과 비교하여 주행속도와 시기별 최소 2.6배, 최대 8.3배의 작업 성능 차이가 나타났다. 재배양식에서는 기계화 수목형이 적합한 것으로 나타났고, 타격방식을 적용한 보행형 구기자 수확기를 이용하여 수형별 시간대별 수확성능을 시험한 결과 우수한 결과가 나타났다. 이에 따라 구기자 재배 농가에 기계화수목형 재배법을 보급하고 타격방식을 적용한 구기자 수확기를 이용하면 작업환경 개선과 노동력, 인건비 절감을 통한 영농규모의 확대 촉진 및 안정적인 영농 구조로 구기자 경쟁력 제고를 할 수 있을 것으로 판단되어진다.

• Journal of the Korean Geophysical Society
• /
• v.8 no.2
• /
• pp.67-74
• /
• 2005

Two-dimensional S-wave velocity sections from SH-wave refraction tomography and surface wave dispersions were obtained by inverting traveltimes of first arrivals and surface wave dispersions, respectively. For the purpose of comparison, a P-wave velocity tomogram was also obtained from a P-wave refraction profiling. P and Rayleigh waves generated by vertical blows on a plate with a sledgehammer were received by 100- and 4.5-Hz geophones, respectively. SH-waves generated by horizontal blows on both sides of a 50 kg timber were received by 8 Hz horizontal geophones. The shear-wave signals were enhanced subtracting data of left-side blows from ones of the right-side blows. Shear-wave velocities from tomography inversion of first-arrival times were compared with ones from inverting dispersion curves of Rayleigh waves. Although the two velocity sections look similar to each other in general, the one from the surface waves tends to have lower velocities. First arrival picking of SH waves is troublesome since P and PS-converted waves arrive earlier than SH waves. Application of the surface wave method, on the other hand, is limited where lateral variation of subsurface tructures is not mild.

• Journal of Korea Game Society
• /
• v.21 no.5
• /
• pp.105-114
• /
• 2021

In this study, we analyzed the motion animation of game characters, which is a visual part of the game elements for 'Hit Impact'. The game selected for analysis focused on the movements of the characters in the arcade game , which is thought to have a weak 'Hit Impact' and looked for the cause. We also analyzed the differences in the motion of the characters in the home transplant version of , which is considered to have improved 'Hit Impact', compared to the arcade version. As a result of the analysis, it was found that the reason for the weak 'Hit Impact' in the arcade version was mainly due to the wrong timing and judgment of hitting and hitting movements, and at the same time, supplemented physical reactions and stun, camera directing, and hitting effects could have a significant impact on improving 'Hit Impact'.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.282-288
• /
• 2011

One of the most challenging issues facing shallow seismic survey is how to generate large amplitude of high frequency signal with small seismic sources. We tested the performance of the most commonly used shallow seismic source, hammer, with four plates: PE, nylon, aluminum, and steel plates. We compared their signal powers in terms of impulsive forces, accelerations, and ground vibration velocities caused by hammer impacts. According to a previous work, hammer blowing to an aluminum plate would generate the largest amplitude among four combinations. However, it was found in this experimental research that aluminum plate delivers seismic wave energy to the ground less than that generated with steel or PE plate. Even though the amplitude is relatively small, plastic plates could provide seismic pulses of 180 ~ 200 Hz in the bandwidth, and it seems to be very hard to generate seismic energy over the frequency of 250 Hz.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.06a
• /
• pp.83-116
• /
• 1993

This article analyzed the dynamic compaction incuced vibration of man made waste landfill. General dynamic properties and compaction-condition-related dynamic properties were analyzed. from the results, it was turned out that the shear modulus G=17496-58320 t/m2, dannpln ratio D=14~58%, dominant frequency f=6-14Hz. Also, it was turned out that the propagation velocitis of low amplitude shear wave and compressive wave were increased as the number of impact increased, the relation between peak particle velocity, and impact distance was wpp=5.08.[D/r E]-1.4, the peak particle velocity was high at the lower part of the waste fill layer and the range of dynamically improved area was about 6-10m.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.820-823
• /
• 2010

본 연구는 채혈바늘에 의해 발생하는 2차 감염을 방지하기 위한 안전 랜싯(Lancet)을 설계 개발하고 연속하여 채혈하는 경우에 쉽게 그리고 편리하게 사용할 수 있도록 무선 전동방식의 채혈기를 설계제작을 목적으로 한다. 안전랜싯은 채혈침과 보호캡이 일체형으로 설계되어 채혈 순간을 제외하고는 채혈침이 항상 보호캡 속에 있도록 하여 채혈바늘에 의한 사고를 방지하도록 하였다. 전동 채혈기는 충전건전지를 전원으로 하고 솔레노이드의 작동으로 랜싯을 타격하여 채혈하도록 설계되었으며, 연발 타격 또는 단발타격의 기능을 선택하도록 설계 제작되었다. 이 채혈기는 한방병의원의 사혈기로도 사용되도록 제작되었다.