• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.575-581
• /
• 2015

The drill bit, which directly transmits percussive forces and torque to the rock, is the core part of a rock drilling machine. For effective drilling, the button arrangement of a drill bit should be optimized because it is the most important design factor in determining drilling efficiency. Furthermore, a quantitative method is necessary to evaluate the button arrangement for the optimization of the drill bit button. Therefore, we propose a new method for the evaluation of the drill bit button arrangement using new evaluation indices, which include the overlapped impact area, blank area, and moment. Moreover, we verify the suitability of the proposed evaluation method by applying it to the conventional button arrangement.

• Journal of the Korea Society for Simulation
• /
• v.26 no.4
• /
• pp.11-21
• /
• 2017

This paper discusses the design parameter sensitivity analysis and multi-objective function optimization for improving the impact performance of an auto-sensing breaker based on the analytical model of the same, which secured reliability in a previous research. The study aims to improve both impact power and stability by complementing the existing research that only improved the impact power. The study sequence is as follows: first, the analysis scenarios for the accurate sensitivity analysis and optimization are set up. Second, the sensitivity of the design parameter of the auto-sensing breaker is analyzed, and the variables with high sensitivity are extracted. Third, the extracted variables are used to optimize the multi-objective functions, and the optimized performance is compared with the initial performance to see how the impact performance on the existing auto-sensing breaker has improved. This study is based on domestic technology, and will allow the development of products with a better blowing performance than their existing overseas counterparts.

• Defense and Technology
• /
• no.5 s.243
• /
• pp.18-29
• /
• 1999

$C^4I$ 체계는 나토군의 효과적인 지휘통제로 정보수집/전파, 지휘결심, 타격명령/실시 등의 제반 절차가 실시간에 이루어지게 되므로 반응시간의 단축을 이루었으며, 정밀유도 무기체계의 유고 핵심시설에 대한 집중 타격은 유고의 군사력을 거의 초토화시킨 상태이다. 코소보 사태와 관련하여 나토군이 선보인 첨단 무기체계 및 신기술은 우리의 국방과학기술의 현주소를 깨닫고 시금석으로 삼을 수 있는 좋은 계기임에 틀림없다. 지금 우리는 기술패권주의 시대에 살고 있고, 이러한 시대에 살아남기 위해서 무엇보다 필요한 것은 최첨단 국방과학기술의 개발일 것이다

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.683-689
• /
• 2017

We have carried out the development for hydraulic breaker which can be operated by optimal mode with ICT convergence technology. This developed system can predict the rock properties. Moreover, this system can maximize the energy efficient with intelligent control of hydraulic system. In order to provide the optimal impact force, this system can measure the descending depth of piston with the proximity sensor and discriminate the rock properties with the measuring data and control the piston stroke using solenoid valve eventually. In addition, we have developed the controller, display module and operating device for cascade (multi-level impact) system and applied the module which can communicate each system by wireless communications. In conclusion, the control system which can control the multi-level impact in accordance with strength of rocks has been developed and approved by several field tests.

• Digital Contents
• /
• no.8 s.111
• /
• pp.90-95
• /
• 2002

2000년부터 시작된 '닷컴 기업의 몰락'으로 전 세계 인터넷 기업들은 큰 타격을 입었다. 수많은 기업들이 만성 적자에 시달리거나 도산해야 했으며 여전히 많은 업체들은 '살아남기'에 급급한 상황이다. AOL, 야후, MSN 등 해외 주요 포탈들과 다음, 야후코리아, 네이버 등 국내 포탈들 역시 갑작스런 광고수익의 급감으로 적지 않은 심리적, 재정적 어려움을 겪어야 했다. 하지만 이들은 그동안 쌓아왔던 시장지배력과 기술력, 기획력 등을 바탕으로 새로운 수익기반 마련에 나섰고 이들의 노력은 올해 상반기부터 하나 둘 결실을 맺고 있다. 이 글은 정보통신정책연구원(KISDI) 정보통신산업연구실의 권남훈 팀장이 지난해 말 발표한 '인터넷 포탈 비즈니스의 진화과정 및 경쟁구도'라는 연구보고서를 토대로 작성됐으며, 이글에 나타난 수치는 최근 자료로 대체됐다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.539-547
• /
• 2002

본 연구는 풋콩 탈협기 개발을 위한 기초연구로서 풋콩 탈협기의 급치를 교환할 수 있고, 급동의 주속도와 송풍팬의 회전속도 및 공기 흡입구의 개구면적을 조절할 수 있는 실험장치를 제작하고, 급치의 종류가 풋콩의 탈협 및 손상에 미치는 영향을 분석하였다. 또한 송풍팬의 회전속도와 흡입 공기구의 개구비 변화 따른 선별 성능을 분석하였다. 그 결과를 요약하면 다음과 같다. 1 급치의 종류에 따른 풋콩의 미 탈협율은 철선 급치가 최대 1.6%, 최소 0.0%,평균 0.7%로서 가장 낮게 나타났고, 그 다음이 경도 60의 고무제 급치로서 최대 2.0%, 최소 0.0% 평균 1.1%, 경도 80의 고무제 급치는 최대 2.5%, 최소 0.0% 평균 1.7% 순으로 높아졌다. 또한 풋콩의 미탈협율은 급동 원주속도가 18m/s에서 55m/s로 증가할수록 감소하였다. 이는 급동의 원주 속도가 증가함에 따라 급치의 선단이 풋콩 꼬투리에 가하는 타격력이 증가하기 때문인 것으로 생각된다. 2. 급치의 종류에 따른 풋콩의 손상율은 경도 80의 고무제 급치는 최대 5.2%, 최소 1.3%, 평균 2.8%로서 가장 낮게 나타났고, 그 다음이 경도 60의 고무제 급치로서 최대 5.7%, 최소 2.4% 평균 3.8%, 철선 급치는 최대 6.3%, 최소 2.6% 평균 4.2% 순으로 높아졌다. 또한 풋콩의 손상율은 급동 원주속도가 증가할수록 풋콩 꼬투리의 손상율은 증가하였다. 이 또한 급등의 원주 속도가 증가함에 따라 급치의 선단이 풋콩 꼬투리에 가하는 타격력이 증가하기 때문인 것으로 생각된다. 3. 공기흡입구의 개구면적을 증가시킬수록 선별율은 높게 나타났으나 개구비가 60%이상에서는 선별율이 크게 차이가 나지 않았으며, 송풍팬의 원주속도를 높일수록 선별율은 높게 나타났다.도 콤바인이 직선구간 및 선회구간을 주행하며 수확작업이 가능함을 알 수 있었다. 그러나 곡선구간에서는 최대오차가 65.5 cm로 매우 크게 나타나, 콤바인을 무인 자율주행으로 수확하기에는 어려움이 있는 것으로 나타났다. 실제 포장은 이론적인 완전한 직선보다는 작은 굴곡이 있는 곡선의 형태가 이루어져 있으므로 주행 오차를 감소하기 위해서는 기계시각을 이용하면 보다 정밀한 조향을 이룰 수 있을 것으로 예상된다. 포장에서 DGPS 신호, 자이로 센서 등을 이용한 콤바인의 무인주행 장치는 무인 수확작업을 위한 가능성을 보여주었고, 일부의 센서의 기능을 개선하면 만족한 성능을 나타낼 수 있을 것으로 판단된다.dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한 대조군은 1.40$\pm$

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.669-679
• /
• 1997

This paper deals with a study of striker type impact hammer drill for improving the drilling performance. The study was performed through a numerical simulation of the impact hammer mechanism and an experimental comparison of the numerical simulation results was followed. Optimization of the impact mechanism was also performed. The numerical model of the impact hammer drill takes into account the striker motion and the effects of the pressure in the cylinder as well as the friction acting on the striker. The equation of motion is solved with the pressure equation in the cylinder including the friction force. The friction is considered as a combination of Coulomb friction and viscous damping friction. At the moment of impact, an ideal impact model that uses restitution coefficient is used to calculate the sudden change of the striker motion. The numerically simulated impact force shows a good agreement with the experimental result and thus, the validity of the numerical model is proven. Based upon the proposed model, an optimization was performed to improve the impact force of the hammer drill. The objective function is to maximize the impact force and the used design variables are striker mass, frequency of piston, bit guide mass, cylindrical diameter and dimensions of the mechanism components. Each design variable and some other conditions that are essential to manitain normal operation of the hammer drill are considered as constraints. The optimized result show a remarkable improvement in impact force and an experimental proof was investigated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.399-403
• /
• 2013

Mining diggers have been substituted with the robots for the mining works in dangerous and narrow tunnel, and those demands are increased in nowadays. In this study, experimental research on the remote controlled robots to perform after the development of the robot. According to the test results, performances of the developed robot and its working devices have been modified several times. It has been considered that the robot keeps its optimum performance in states as follows; driving speed 1.0 km/h, crawl angle $10^{\circ}$, spiking cycle 500bpm and breaking power $30kg_fm$. And also it has been found that sufficient cooling for the robot's working parts is essential to extend those working periods longer than 3 hours steadily under rating condition.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.6
• /
• pp.1065-1074
• /
• 2012

The purpose of this paper is to statistically analyze the effects of on-base and slugging ability on the run productivity in Korean professional baseball. In Section 2, we have investigated the OPS (On-base percentage Plus Slugging average) and introduced new indices of batting ability by modifying the OPS. In Section 3, we have examined the correlation which the batting average, on-base percentage, slugging average, IsoP (Isolated Power), OPS and the indices introduced in Section 2 have with the average runs per game, using the data from all the games of the regular seasons in 2007~2011. In addition, by generalizing the OPS and the indices introduced in Section 2, we have analyzed the correlation of the indices with various weights between the average runs per game. As a result, the weighted OPS consisting of on-base percentage (with weight 57%) and slugging average (with weight 43%) has been found to give the best explanation of the run productivity.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.405-411
• /
• 2017

The purpose of this study was to identify the color that you want the pitcher glove hit impact on the intensity of the other. The color of the glove pitcher was set to black, orange, beige three kinds analyzed the concentration of the batter accordingly. Subjects of this study were 15 people targeting high school baseball players in Daejeon, through a pre- test and vision test color blind players were selected with no visual problems. After the blow of the experiment was used to color the glove Nideffer is modified to fit and complement the six subscales B-TAIS. As a result, when wearing a colored glove that contrasts with the color of the ball, the batter's concentration was increased. Hopefully, research will take place using the ball skill and equipment of various pitchers.