• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1091-1097
• /
• 2005

This study was carried out to develop jelly food using dried persimmon. Jelly products were prepared with the ratio of 5, 10, 15, 20 and $25\%$ of dried persimmon extract. Quality characteristics of its products were investigated. Proximate compositions of jelly were $6.74\~14.03\%$ of moisture, $6.83\~7.53\%$ of crude protein, $0.62\~1.16\%$ of crude lipid, $2.61\~13.21\%$ of crude ash, respectively. Water activity and brix $(\%)$ of jelly products ranged from 0.678 and $56.66\%\;to\; 0.748\;and\;76.59\%$. The pH and total acidity of jelly products ranged from 5.30 and $0.06\%$ to 5.38 and $0.09\%$. In the Hunter's color values, L, a and b vaules of jelly products were increased, respectively. Major free-sugar and organic acid of jelly products were maltose ($753\~1,297mg/100g$) and malic acid (263mg/100g in $25\%$ dried persimmon jelly). Major mineral of jelly products was K ($69.64\~154.37mg/100g$). In the texture property, addition of dried persimmon extract decreased gumminess and chewiness. In sensory score of dried persimmon jelly, color, flavor, texture and sweetness of $15\%$ dried persimmon jelly were high score, taste and overall acceptance of jelly products were high score, respectively. Judging from research results of the jelly products, recommended substitution level for addition of dried persimmon extract in jelly was $10\~15\%$.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.652-655
• /
• 2013

Natural habitats of weedy melons were distributed on the islands along and on the west and south coasts of Korean peninsula including Boryeong, Seosan (Taean), Seocheon, Okgu, Buan, Gochang, Yeonggwang, Muan, Shinan, Haenam, Jindo, Wando, Goheung, Yeocheon, Hadong, Namhae, Goseong, Tongyeong, Geoje, and Jeju islands including Jeju city, Bukjeju-gun and Nam Jeju-gun. Weedy melons were found growing wildly in or around the cultivated lands in these regions. Natural habitats of weedy melons were in and around the cultivated lands. Weedy melon plants were found most often in soybean fields, followed by fields of mungbean, sweet potato, pepper, sesame, cotton, and peanuts. The plants were also found growing wild in foxtail millet fields, rice paddy levees along the streams, upland field edges, watermelon fields, corn fields, vegetable gardens near farmhouse, orange fields, compost piles, fallow fields, roadside and home gardens. They inhabited in sunny and a little dry spaces in relatively low-height crop plant fields in general. The time of fruit maturity was from early July to late October with the most frequency in September according to post survey answer. Fruits dropped off from the fruit stalk when matured. This phenomenon was thought beneficial for perpetuation in the wild. The fruits were being used commonly for food and toys for children. It was thought that weedy melons were perpetuating through the cycle of human and animal feeding of the fruits, human and animal droppings, often mixed in compost, and application of the compost to crop fields by human.

• Journal of Internet of Things and Convergence
• /
• v.9 no.2
• /
• pp.61-69
• /
• 2023

In recent years, due to heightened environmental awareness, Electric Power Steering (EPS) has been increasingly adopted as the steering control unit in manufactured vehicles. This has had numerous benefits, such as improved steering power, elimination of hydraulic hose leaks and reduced fuel consumption. However, for EPS systems to respond to actions, sensors must be employed; this means that the consistency of the sensor's linear variation is integral to the stability of the steering response. To ensure quality control, a reliable method for detecting defects and assessing linearity is required to assess the sensitivity of the EPS sensor to changes in the internal design characters. This paper proposes a data-driven defect and linearity assessment monitoring system, which can be used to analyze EPS component defects and linearity based on vehicle speed interval division. The approach is validated experimentally using data collected from an EPS test jig and is further enhanced by the inclusion of a Graphical User Interface (GUI). Based on the design, the developed system effectively performs defect detection with an accuracy of 0.99 percent and obtains a linearity assessment score at varying vehicle speeds.

• Information Systems Review
• /
• v.25 no.4
• /
• pp.47-65
• /
• 2023

In this paper, we investigate how the online voting system can be a trust-based system from a technical perspective. Under four principles of voting, we finely evaluate the existing belief that offline voting is safer and more reliable than online voting based on procedural processes, technical principles. Many studies have suggested the ideas for implementing online voting system, but they have not attempted to strictly examine the technologies of online voting system from the perspective of voting requirements, and usually verification has been insufficient in terms of practical acceptance. Therefore, this study aims to analyze how the technologies are utilized to meet the demanding requirements of voting based on the technologies proven in the field. In addition to general data encryption, online voting requires more technologies for preventing data manipulation and verifying voting results. Moreover, high degree of confidentiality is required because voting data should not be exposed not only to outsiders but also to managers or the system itself. To this end, the security techniques such as Blind Signature, Bit Delegation and Key Division are used. In the case of blockchain-based voting, Mixnet and Zero-Knowledge Proof are required to ensure anonymity. In this study, the current status of the online voting system is analyzed based on the field system that actually serves. This study will enhance our understanding on online voting security technologies and contribute to build a more trust-based voting mechanism.

• The Transactions of the Korea Information Processing Society
• /
• v.13 no.2
• /
• pp.34-40
• /
• 2024

Secret sharing is a cryptographic technique that involves dividing a secret or a piece of sensitive information into multiple shares or parts, which can significantly increase the confidentiality of a secret. There has been a lot of research on secret sharing for different contexts or situations. Tassa's conjunctive secret sharing method employs polynomial derivatives to facilitate hierarchical secret sharing. However, the use of derivatives introduces several limitations in hierarchical secret sharing. Firstly, only a single group of participants can be created at each level due to the shares being generated from a sole derivative. Secondly, the method can only reconstruct a secret through conjunction, thereby restricting the specification of arbitrary secret reconstruction conditions. Thirdly, Birkhoff interpolation is required, adding complexity compared to the more accessible Lagrange interpolation used in polynomial-based secret sharing. This paper introduces the multi-compartment secret sharing method as a generalization of the conjunctive hierarchical secret sharing. Our proposed method first encrypts a secret using external groups' shares and then generates internal shares for each group by embedding the encrypted secret value in a polynomial. While the polynomial can be reconstructed with the internal shares, the polynomial just provides the encrypted secret, requiring external shares for decryption. This approach enables the creation of multiple participant groups at a single level. It supports the implementation of arbitrary secret reconstruction conditions, as well as conjunction. Furthermore, the use of polynomials allows the application of Lagrange interpolation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.2
• /
• pp.120-128
• /
• 1976

Two experiments were conducted to study the nature of protein degradation in fish muscle postmortem, first one with English sole (Paraphyrus vetulus) followed by another with rockfish (Sebastodes spp.). In the first one, proteolysis was measured by the increase of amino-N in gutted fish during storage in ice and in the homogenates prepared from fish of different ice storage during $20^{\circ}C-incubation$. In order to test the possible involvement of fish muscle a cathepsin, a portion of each homogenate sample was exposed to 0.5 Mrad of gamma radiation to destroy viable microorganisms prior to the incubation. Proteolysis was not detected until viable count reached a level above $10^7$ cells per gm fish flesh, corresponding to 31 days of ice storage. Even if fish flesh were mechanically disrupted by means of homogenization and subsequently incubated at $20^{\circ}C$, proteloysis attributable to muscle cathepsin was not detected. In the second with rockfish muscle aseptically prepared from freshly killed fish, the samples were inoculated with a proteolytic strain of fish spoilage Pseudomonad or irradiated at 0, 0.5 and 3.0 Mrad. The four samle groups were stored at $0-2^{\circ}C$ to compare the spoilage pattern of sterile and non-sterile muscle. In sterile muscle both total-N (extracted in 0.5M KCl) and amino-N $(soluble\;in\;70\%\;ethanol)$ declined slightly while the inoculated muscle showing increase in parallel with the increase of number of inoculated bacterium. The results indicate that proteolysis is a part of normal fish spoilage and the onset of proteolysis is delayed until viable count reaches its maximum level. Contribution of fish muscle cathepsin to protein degradation in white flesh fish muscle post-mortem is nil.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.131-136
• /
• 1990

여러해 전부터 선박의 생산실적이나 생산성 관련 자료를 기록하고 보완하는 작업을 꾸준히 개선토록 노력해온 결과중 중요한 것 하나는, 선박의 여러 가지 설계 검토과정에서 충분히 활용할 수 있는 함축성 있고 믿을만한 형태의 생산정보를 제공해줄 수 있게 되었다는 것이라고 말 할 수 있겠다. 이러한 자료들은 생산계획상 각 단계(stage)에서의 작업량, 예상재료비와 인건비의 산출등이 포함될 수 있으며, 선박이나 해상구조물의 전반적인 설계방법론(design methodology)을 개선코자 한다면 ''생산지향적 설계(Design for Production)''의 근간이 되는 선박건조전략(build strategy), 구매정책(purchasing policy)과 생산기술(production technology)에 대한 폭넓은 지식이 한데 어우러져야 한다. 최근에는 CIMS의 일부분에서 보는 바와 같은 경영관리, 설계 및 생산지원 시스템의 도입으로 이와 같은 설계 프로세스의 추진을 가능케하고 있다. 이와 병행하여 설계를 지원하기 위한 전산기술, 특히 대화형 화상처리기술(interactive graphics)의 발달은 설계자가 선박의 형상이나 구조 배치를 여러 가지로 변화시켜 가면서 눈으로 즉시 확인할 수 있도록 설계자의 능력을 배가시키는데 크게 기여하고 있다. 여러 가지의 설계안(alternative design arrangement)을 신속히 만들어내고 이를 즉시 검토 평가할 수 있는 능력을 초기설계 단계에서 가질 수 있다면 이는 분명히 큰 장점일 것이며, 더구나 설계초기 단계에 생산관련인자를 설계에서 고려할 수 있다면 이는 더욱 두드러진 발전일 것이다. 생산공법과 관련생산 비용을 정확히 반영한 각 가지의 설계안을 짧은 시간내에 검토하고 생산소요 비용을 산출하여 비교함으로써, 수주계약단계에서 실제적인 생산공법과 신뢰성있는 생산실적자료를 기준으로 하여 총 건조비(total production cost)를 최소로 하는 최적의 설계를 선택할 수 있도록 해 줄 것이다. 이제 이와 같은 새로운 설계도구(design tool)를 제공해 주므로써 초기설계에 각종 생산관련 정보나 지식 및 실적자료가 반영가능토록 발전되었다. 본 논문은 영국의 뉴카슬대학교(Univ. of Newcastle upon Type)에서 위에 언급한 특징들을 반영하여 새로운 선박구조 설계 방법을 개발한 연구결과를 보여주고 있다. 본 선계연구는 5단계로 구분되는데; (1) 컴퓨터 그라픽스를 이용하고 생산정보 데이타베이스와 연결시켜 구조형상(geometry)을 정의하고 구조부재 칫수(scantling) 계산/결정 (2) 블럭 분할(block division) 및 강재 배치(panel arrangement)의 확정을 위해 생산기술 및 건조방식에 대한 정보 제공 (3) 상기 (1) 및 (2)를 활용하여 아래 각 생산 단계에서의 생산작업 분석(work content assessment) a) 생산 준비 단계(Preparation) b) 가공 조립 단계(Fabrication/Assembly) c) 탑재 단계(Erection) (4) 각각의 설계(안)에 대하여 재료비(material cost), 인건비(labour cost) 및 오버헤드 비용(overhead cost)을 산출키 위한 조선소의 생산시설 및 각종 품셈 정보 (5) 총 건조 비용(total production cost)을 산출하여 각각의 설계안을 비교 검토. 본 설계 방식을 산적화물선(Bulk Carrier) 설계에 적용하여 구조배치(structural geometry), 표준화의 정도(levels of standardisation), 구조생산공법(structural topology) 등의 변화에 따른 설계 결과의 민감도를 분석(sensitivity studies)하였다. 전산장비는 설계자의 대화형 접근을 용이하도록 하기 위해 VAX의 화상 처리장치를 이용하여 각 설계안에 대한 구조형상과 작업분석, 건조비 현황 등을 제시할 수 있도록 하였다. 결론적으로 본 연구는 설계초기 단계에서 상세한 건조비 모델(detailed production cost model)을 대화형 화상 처리방법에 접합시켜 이를 이용하여 여러가지 설계안의 도출과 비교검토를 신속히 처리할 수 있도록 함은 물론, 각종 생산 실적정보를 초기설계에 반영하는 최초의 시도라고 믿으며, 생산지향적(Design for Production) 최적설계분야의 발전에 많은 도움이 되기를 기대해 마지 않는다. 참고로 본 시스템의 설계 적용결과를 부록에 요약 소개하며, 상세한 내용은 참고문헌 [4] 또는 [7]을 참조 요망한다.

• Journal of Korean Society of Forest Science
• /
• v.42 no.1
• /
• pp.83-100
• /
• 1979

It was planned and performed to study the possibility on the use of inexpensive and easily acquirable foliage powder, which processed by pulverizing after dried, instead of imported expensive wheat flour for the extending of plywood adhesives. Pine leaves of softwood trees, Poplar, Oak and Sycamore leaves of broad leaved species were selected and harvested to pulverize into the minute foliage powder. The harvested foliages from each selected species were pulverized into 40 mesh particles after dried at $100{\sim}105^{\circ}C$ condition during 24 hours in drying oven. To compare the extending effect of plywood adhesives with these foliage powders 100 mesh wheat flour using at current plywood industry was also prepared. Foliage powder and wheat flour were extended into 10, 20, 30, 50 and 100% to the urea and phenol formaldehyde resin. After plywoods were processed by the above extending method shear strength of extended plywoods were analyzed and discussed. The results obtained at this study are as follows: 1) Among 10% extensions of urea formaldehyde resin plywood, dry shear strength of plywood extended by wheat flours was the highest and that of non-extended plywood the next. Plywood extended with foliage powder showed the lowest dry shear strength. The order of dry shear strength of plywoods extended by foliage powder was that of Oak foliage powder extension, the best, that of Sycamore, that of Pine, and that of Poplar. 2) Among 20% extensions of urea formaldehyde resin plywood, plywood extended by wheat flour showed the highest dry shear strength, and the next was plywood by Poplar foliage powder. All these two showed higher dry shear strength than non-extension plywoods. Except Poplar, dry shear strength of foliage powder extension plywoods was bad, but the order of dry shear strength of plywoods extended by foliage powder was Pine, Poplar and Oak. 3) In the case of 30% extensions of urea formaldehyde resin plywood, dry shear strength of wheat flour extension was the highest and non-extension the next. Dry shear strength of foliage powder extension plywoods was poor with a rapid falling-off in strength. 4) Among 50% and 100% extensions of urea formaldehyde resin plywood, only wheat flour showed excellent dry shear strength. In the case of foliage powder extension, low dry shear strength showed at the 50% extension of Pine and Poplar, and plywoods of 50% extension of Oak foliage powder delaminated without measured strength. All plywoods of 100% foliage powder extension delaminated, and then shear strength were not measured. 5) Among wet shear strength of 10% extensions of urea formaldehyde resin plywood, wheat flour extension was the highest as in the case of dry shear strength, and non-extension plywood the next. Except Poplar foliage extension, all foliage powder extension plywoods showed low shear strength. 6) Wet shear strength of plywoods of 20% extension lowered in order of non-extension plywood, plywood of wheat flour extension and plywood of foliage powder extension, but other plywoods of foliage powder extension except plywoods of Poplar and Oak foliage powder extension delaminated. 7) Wet shear strength of 30% or more extension of urea formadehyde resin plywood were weakly measured only at 30% and 50% extension of wheat flour, and wet shear strength of plywoods extended by foliage powder were not measured because of delaminating. 8) Dry shear strength of phenol formaldehyde plywoods extended by 10% wheat flour was the best, and shear strength of plywoods extended by foliage powder were low, but the order was Oak, Poplar, and Pine. Plywood of Sycamore foliage powder extension delaminated. 9) In the case of 20% extensions of phenol formaldehyde resin, dry shear strength of plywood extended by wheat flour was the best, but plywood of Pine foliage powder extension the next, and the next order was Oak and Poplar foliage powder. Plywood of Sycamore foliage powder extension delaminated. 10) Among dry shear strength of 30% extensions of phenol formaldehyde plywood, that of Pine foliage powder extension was on the rise and more excellent than plywood of wheat flour extension, but Poplar and Oak showed the tendency of decreasing than the case of 20% extension. Plywood of Sycamore foliage powder extension delaminated. 11) While dry shear strength of 50% and 100% extension plywoods were excellent in the case of Pine foliage powder and wheat flour extension, that of hardwood such as Poplar, Oak, and Sycamore foliage powder extension were not measured because of delaminating. 12) As a filler the foliage powder extension of urea formaldehyde resin is possible up to 20% with Poplar foliage powder. And also as an extender for phenol formaldehyde resin, Pine foliage powder can be added up to the same amount as that in the case of wheat flour.

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.437-443
• /
• 2001

Gastrodia elata blume (GEB) is considered to be a useful herbal medicine in oriental countries for the treatment of headache, migraine, dizziness, childhood convulsion, epilepsy, rheumatism, hypertension, neuralgia and neurological disorders. This study was carried out to investigate the quality of bread added with the powder of GEB. The possibility of GEB wheat flour mixture as bread was studied by adding 0%, 0.5%, 1.0%, 1.5%, 2.0% of GEB powder to wheat flour. In Farinograph data, the dough stability decreased with the increase of GEB powder. Granular size of starches ranged from $36\;{\mu}m\;to\;60{\mu}m$, and the shape of them showed a long oval figure. Amylograph showed that the increase in the ratio of GEB on the doughs slightly elevated in the maximum viscosity. The loaf volume of 0.5% powder increased by 10.2% but that of 2.0% decreased by 16.8%. The moisture content was 43.57% in the control but it increased as the powder addition. The colors of crust and crumb were not significantly different among L, b and ${\Delta}E$, but 'a' value in crumb was increased as the powder addition. The addition of the powder had no significant effect on bread texture. In sensory evaluation, the moistness increased as the increase of the powder addition. The control bread was most excellent, and the bread made by mixing additives were better than just 0.5% GEB-wheat flour in terms of quality.

• Clinical and Experimental Pediatrics
• /
• v.52 no.2
• /
• pp.227-233
• /
• 2009

Purpose : Growth hormone (GH) replacement after retesting is necessary because impairment of body composition and cardiovascular health has been more severe in adult patients with persistent GH deficiency (GHD) from childhood to adulthood. This study aimed to investigate the factors for persistent GHD and define a highly probable group of persistent GHD in young adults with childhood-onset GHD. Methods : GHD was reassessed by insulin tolerance test (ITT) in 55 adult patients (39 males, 16 females) with childhood-onset GHD. Twelve patients presented with idiopathic GHD and 43 patients presented with organic GHD caused by tumors involving the hypothalamus-pituitary (H-P) region (n=33), other brain tumors (n=3), meningitis (n=3), leukemia (n=2) and others (n=2). Results : Forty-nine (89.1%) of 55 patients had persistent GHD. IGF-I was positively correlated with log of peak GH (r=0.57, P<0.001). There was no difference in the proportion of persistent GHD between idiopathic and organic GHD. The percentage of patients with persistent GHD was 40%, 80%, and 95.6% for patients with zero, one, two or more additional pituitary hormone deficiencies (PHDs), respectively (P=0.002). The probability of persistent GHD was higher in patients with diseases involving the H-P region (P=0.003). GHD persisted in 15 of 18 patients treated with cranial irradiation. Conclusion : We suggest that the probability of persistent GHD in adulthood was high in patients with 2 or more additional PHDs, and diseases involving the H-P region.