• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.748-751
• /
• 2000

Microlens made by laser radiation method have advantages in the easiness of their fabrication. The process is based on the projection of a chromium-on-quartz reticle on to the Polymer using a pulsed 248nm KrF excimer laser. Fabrication process is a fluence-dependent rate and density. The lens shape is defined by a rotationally symmetric sluence distribution with smooth radial variation in the image plane of the reticle. A typical lens of 50㎛ diameter was fabricated by irradiating 2000 laser pulses within 40 seconds. The experimental results show microlens fabrication by UV laser is possible and well worth studying further.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.33-39
• /
• 2003

A new microlens fabrication technique, the excimer laser lithography is developed. This bases on the pulsed laser irradiation and the transfer of a chromium-on-quartz reticle on to the polymer surface with a proper projection optics system. An excimer laser lithography system with 1/4 and 1/20 demagnification ratios was constructed first, and the photoablation characteristics of the PMMA and Polyimide were experimentally examined using this system. For two different shapes of microlenses, a spherical lens and a cylindrical lens, fabrication techniques were investigated. One for the spherical lens is a combination of the mask pattern projection and fraction effect. The other for the cylindrical lens is a combination of the mask pattern projection and the relative movement of a specimen. The result shows that various shapes of micro optical components can be easily fabricated by the excimer laser lithography.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.223-228
• /
• 1998

Glass films of $SiO_2-TiO_2-M_xO_y$ (M = Co, Cr or Cu) have been prepared on soda-lime-silica slide glasses by the chemical solution method using a spin-coating technique. Commercially available tetraethyl orthosilicate, titanium trichloride, and cobalt-, chromium- and copper-nitrates were used as starting materials. No crystalline segregations of $Co_3O_4$, $Cr_2O_3$ and CuO were observed by X-ray diffraction ${\theta}-2{\theta}$ scans. From the optical transmission analysis, cobalt existed as $ Co^{2+}$ in tetrahedral coordination, chromium as $Cr^{6+}$ in tetrahedral symmetry and copper as $Cu^{2+}$ in octahedral coordination. Films with a crack-free and no texture exhibited homogeneous interfaces between the films and the substrates along the cross-section.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.53-53
• /
• 2000

반도체 산업에서 유기물질의 응용에 많은 관심을 나타내고있으며, 그 응용의 예로는 발광 다이오드(light emitting diode)와 박막트랜지스터(thinfilm transistor)가 주를 이루고 있다. 이러한 유기 물질을 이용하면 소자의 제작 공정의 단순화와 제작 가격을 낮출 수 있는 이점을 기대할 수 있다. 본 연구에서는 유리 기판 위에 pentcence 다이오드를 제작하였다. 유리 기판 위에 silicon dioxide를 PECVD으로 성막하였다. 전극으로는 Ohmic contact를 이루기 위해 금(Au)을 사용하였으며 schottky contact을 이루기 위해서 알루미늄(Al), 인듐(In), 크롬(Cr), 은(Ag), 금(Au)을 각각 사용하였다. 소자의 활성 층으로는 pentcene을 가장 단순한 열 증착법으로 성막하였고, 진공도는 10-8Torr를 유지하였으며 성막 속도는 0.3 $\AA$/sec로 성막하였다. 제작된 소자들은 $\alpha$-step, I-V, C-V, AFM, IR등을 이용하여 측정, 분석하였다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.84-88
• /
• 2005

본 연구에서는 백색광원용 조명램프에 필요한 고밀도로 집적된 LED 어레이를 제작하기 위하여 반도체제조 공정에 필요한 포토마스크를 AutoCAD 상에서 설계하였으며 레이저 리소그래피 장비를 이용하여 포토마스크를 제작하였다. 웨이퍼상에 LED칩을 개별적으로 제작한 후 이들을 직렬 및 병렬로 금속배선하여 연결하였다. 특히 AutoCAD로 각 공정의 포토마스크 패턴을 설계 작업한 후 DWG 파일을 DXF 파일로 변환하여 레이저빔으로 스캔닝하였다. 이를 소다라임 유리판 위에 크롬을 증착한 후 각 패턴에 맞추어 식각 함으로써 포토마스크를 제작하였다. 또한 2인치 InGaN/GaN 다중 양자우물구조의 광소자용 에피박막이 증착된 사파이어 웨이퍼에 포토마스크를 활용하여 반도체 제조공정을 수행하였으며, 금속배선된 백색LED램프를 제작하였다.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.74-78
• /
• 2003

Multi-channel images of 11-MUA and 11-MUOH self-assembled monolayers were obtained by using two-dimensional surface plasmon resonance (SPR) absorption. Patterning process was simplified by exploiting direct photo-oxidation of thiol bonding (photolysis) instead of conventional photolithography. Sharper images were resolved by using a white light source in combination with a narrow bandpass filter in the visible region, minimizing the diffraction patterns on the images. The line profile calibration of the image contrast caused by different resonance conditions at each points on the sensor surface (at a fixed incident angle) enables us to discriminate the monolayer thickness in sub-nanometer scale. Furthermore, there is no signal degradation such as photo bleaching or quenching which are common in the detection methods based on the fluorescence.