• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.379-380
• /
• 2010

This study is aimed to investigate performance of the NPP structure. Thus, assess the effects of physical properties of NPP concrete by measure the compressive strength, permeability coefficient and air permeability coefficient.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.973-979
• /
• 1995

콘크리트의 물리적 특성치인 크리이프, 건조수축, 탄성계수 및 포아슨비등은 배차조건, 부재의 크기, 양생 및 재하조건 등 많은 요소들의 영향을 받고있다. 특히 크리이프와 건조수축은 복잡한 시간의존성 특성(time-dependent properties)으로 인해 아직까지도 이 분야에 대한 연구가 계속되고 있다. 따라서 본 연구에서는 불확실성이 많은 콘크리트의 장기거동에 따른 물리적 특성규명을 위하여 재하재령을 변화(7, 28, 90, 180, 365일) 시키면서 크리이프, 탄성계수, 포아슨비등을 측정, 분석함으로써 콘크리트 장기거동 예측식을 제시하였으며, 이는 프리스트레스트 콘크리트 구조물에서의 시간에 따른 응력손실을 고려한 유효 프리스트레스 응력 산정 및 구조물의 건전성 평가에 실질적 도움을 줄 수 있을 것으로 판단된다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.313-316
• /
• 2008

As high rise buildings with 100 or more stories are being constructed, it is inevitable to use high performance materials including high performance concrete. What is most important in high performance concrete is extremely high strength in order to reduce the section of members in high rise buildings. During the last several years, there have been active researches on Ultra high strength concrete. While these researches have been mostly focused on strength development, however, other accompanying physical properties have not been studied sufficiently. Thus, the present study purposed to obtain and analyze data on the physical mechanical properties of Ultra high strength concrete through experiments and to use the results as basic information on required performance of concrete used in high rise buildings.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.16-23
• /
• 2002

In construction field, million tons of demolished concrete are produced in korea. It is urgently needed that they are used as recycled materials in order to prevent environment pollution and gain economic profits. However, existing recycling methods of demolished concrete have their limits for wide application. They have been only focused on the burying and banking. Therefore, in this paper, physical and mechanical properties of planting concrete using construction wastes for aggregates are described in order to investigate the validities of demolished concrete as recycled aggregates. The Properties of strength and durability are tested. According to the experimental results, compressive strength and freeze-thaw resistance of planting concrete using recycled aggregates shows worse performance than those using crushed stone concrete. But, it shows positive performance on the absorption ratio and thermal conductivity. Especially, considering the side of recycling of concrete wastes, it is recommended that recycled aggregates made with construction wastes is applied to planting concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.305-306
• /
• 2010

Recently, concrete have been used not only for structural purpose but also for various other purposes. The goal of this research is to develop porous and pervious light-weight concrete in order to apply to filters, which primarily treats rain water. Because Porous and pervious light-weight concrete is discontinuum with large amount of porosity, its physical characteristic is completely different from that of ordinary concrete. The basic properties such as the change in porosity rate depending on mixing proportion and the mechanical characteristics of porous and pervious light-weight concrete were experimentally evaluated.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.354-358
• /
• 2007

레드머드와 피그먼트의 미세구조분석과, 이를 이용한 칼라 콘크리트의 강도 특성 연구, 초기 건조수축 실험, 그리고 색상분석 결과, 레드머드를 사용한 칼라 콘크리트는 산업현장에 실용화될 수 있는 충분한 물리적 특성을 나타내었다. 뿐만아니라 종래의 산화철 피그먼트를 사용한 칼라 콘크리트와 비교하여 월등히 우수한 디자인 특성을 나타내었다. 따라서, 레드머드는 디자인 중심의 도로포장 조성에 대량 이용 가능하다고 판단된다. 향후, 장기적인 색상분석과 강도특성에 대한 연구가 수행되어야 한다고 사료된다.

• Magazine of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.18-23
• /
• 2002

구조재료로써 콘크리트의 물리적 특성은 강재와는 달리 시간 의존적이라고 할 수 있다. 즉, 타설 후 재령이 경과함에 따라 압축강도와 탄성계수가 증가함은 물론, 콘크리트 내의 수분이 대기 상태로 증발하면서 부재가 수축하는 건조수축 및 외력의 증감없이 변형률이 증가하는 크리프 특성 등을 가지고 있다. 또한, 콘크리트는 시멘트의 수화반응에 의해 시공초기에 재료의 온도가 급격히 상승하는 발열특성도 동시에 가지고 있다. 이러한 특성들은 구조물의 설계시 무시할 수 없으며, 각 시공단계 및 완성단계의 구조물의 응력에 커다란 영향을 미치게 된다.(중략)

• Journal of the Korea Concrete Institute
• /
• v.27 no.5
• /
• pp.559-568
• /
• 2015

In this study, multi-component blended concrete mix with fly ash and ground granulated blast furnace slag according to 3 level of type of warter reduction agent (type of 0%, 8% and 16%) and 3 level of water-binder ratio (40%, 45% and 50%) was prepared for evaluation of effect of physical characteristics of concrete using multi-component blended binder according to warter reduction efficiency of warter reduction agent. In addition, concrete mix was carried out repetition test of three times in order to secure the reliability. As a result, compressive strength according to type of warter reduction agent was found that difference of strength was about 20% occurred, warter reduction efficiency of warter reduction agent was showed that a great influence on qualities of concrete. Therefore, reflected the effect of warter reduction efficiency of warter reduction agent, prediction model equations of compressive strength for multi-component blended concrete was proposed, it was found that more than 90% of the high correlation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.58-65
• /
• 2019

Polymer concrete is expected to be widely used as a building material because it has a shorter hardening time and excellent compression, tensile, bending, bond strength, frictional resistance and abrasion loss compared to general concrete. The polymer concrete has excellent vibration damping performance and research on the use of various reinforcing materials is being conducted. However, in order to completely replace the general concrete and the general anti-vibration reinforcement, such polymer concrete requires an overall review of vibration reduction performance considering physical properties, dynamic properties, productivity and field applicability. In this study, the physical and dynamic properties of polymer concrete by epoxy mixing ratio were compared with those of general concrete. It was appeared that compression, tensile, bending and bond strengths of polymer concrete by epoxy mixing were significantly higher than those of general concrete. Especially, the tensile strength was more than 4 ~ 6.5 times. Based on the basic physical properties of polymer concrete, the damping ratio, which is a dynamic characteristic according to the epoxy mixing ratio, was derived through analytical models and experiments. As a result, the dynamic stiffness of polymer concrete was 20% higher than that of general concrete and the loss rate was about 3 times higher.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.4
• /
• pp.183-193
• /
• 1998

This study was designed, firstly, to determine the mineralogical and chemical characteristics of some rock aggregates, secondly, to offer interrelationships between those and mechanical properties, and thirdly, to evaluate their suitability for concrete aggregates. Mineralogical, chemical, physical and mechanical characteristics of the studied rock aggregates indicate that granite from BJ quarry and banded gneisses from KB. HI and SK quarry, and quartzite from the Hongcheon riverside are not proper to cement concrete aggregates because of quartz's potential possibility of alkali-silica reaction, and limestone in SY quarry is proper to asphalt concrete aggregates owing to dolomite causing alkali-carbonate reaction. Augen gneiss and diorite from KB and SA quarry, respectively, are to be not suitable for concrete aggregates because of biotite contents, but augen gneiss in HI quarry and gneisses in Hongcheon riverside are proper to concrete aggregates because of mineralogical and mechanical characteristics.