• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10A
• /
• pp.1006-1012
• /
• 2008

This paper presents a Duvall-structure-based adaptive beamforming method which efficiently cancels coherent and incoherent interferences. The proposed method exploits several correlation vectors to increase the dimension of the weight vector, compared to the existing method which uses a single correlation vector only. The increased dimension of the weight vector leads to an improvement in the signal-to-interference plus noise ratio (SINR) performance. Moreover, the proposed method can suppress more interferences than the existing one. Simulation shows that the former is superior to the latter in terms of the steady-state and transient responses.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1661-1668
• /
• 1990

In a turbulent premixed flame stabilized by the streamline step, and dominated by a coherent eddy, a flame micro-structure was investigated with analyzing the signals of temperature, the ion current, and schieren phtographs simultaneously. Generally the contours of large scale coherent eddies of schlieren photographs was considered as the flame front, however, the main reaction can be occurred within the eddy as a structure of fine flamelets scale. The surrounding burned gas of flamelets could not propagate to a unburned mixture, obstructing flamelets from propagating to a unburned mixture. Consequently, it could restrain flashback. The main reaction region was found to be located at higher temperature of the burned gas rather than at maximum rms of fluctuating temperature. The peak probability of higher temperature was 6 times greater than that of lower temperature. As it was difficult to infer a flame structure from PDF distribution of the fluctuating temperature in form of bimodal shape, it should be taken into consideration with other informations related to the sensitive flame front, for instance, ion current.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.4
• /
• pp.326-334
• /
• 1991

We propose an optical Asynchronous Transfer Mode(ATM) switching system using free-space optics and an output buffer memory. The distributor system in the switching fabric was analyzed using the Huygens-Fresnel principle and lens transformation. For monochromatic illumination, a pattern similar to the Fourier transform of the input distribution was observed across the output plane. A spatially broadened intensity distribution across the the output plane can be expected when the system is illminated with a partially coherent, quasimonochromatic beam. Spatially coherent pulses as short as 100fs can propagate through the distributor without severe spatial broadening.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1234-1243
• /
• 1990

Double coaxial are jets(annular and coaxial air jets) between which propane gas is fed was selected to study the structure of diffusion flames in turbulent shear flow. Schlieren and direct photographs are taken to visualize the flame structure. Mean and fluctuating temperatures and ion currents were measured to investigate the macroscopic and the instantaneous flame structure. The objective of this study is to understand the interaction between combustion and mixing process especially in the transition region of turbulent shear flow. The investigation reported in this paper focuses on the macroscopic and the instantaneous structures of three flames obtained. The increased mixing effect resulting from increase of Reynolds number of central air jet makes the flame bluish and short. When the velocity of surrounding air stream is higher than that of central air jet, the instantaneous flame structure is composed of coherent structure. It is considered that the flame structure of transitional region of mixing layer depends on the structure of mixing layer of non-reacting conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.11
• /
• pp.1527-1534
• /
• 2001

Phase averaged velocity fields in the near wake region behind a square cylinder have been (successfully) obtained using randomly sampled PIV data sets. The Reynolds number based on the flow velocity and the vertex height was 3,900. To identify the phase information, we examined the magnitude of circulation and the center of peak vorticity. The center of vorticity was estimated from lowpass filtered vorticity contours (LES decomposition) adopting a sub-pixel searching algirithm. Due to the sinusoidal nature of firculation which is closely related to the instantaneous vorticity, the location of peak voticity fits well with a sine curve of the circulation magnitude. Conditionally-averaged velocity fields represent the barman vortex shedding phenomenon very well within 5 degrees phase uncertainty. The oscillating nature of the separated shear layer and the separation bubble at the top surface are clearly observed. With the hot-wire measurements of Strouhal frequency, we found thats the convection velocity changes its magnitude very rapidly from 25 to 75 percent of the free stream velocity along the streamwise direction when the flow passes by the recirculation region.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.360-367
• /
• 2006

In this paper, we design the complementary code keying (CCK) modulation/demodulation structure that is proposed in the IEEE 820.11b and IEEE 802.11g. And, this paper proposes the CCK Rake receiver to be fitted for the large delay spread case like the inter-vehicle communications. The channel estimation of each path in the multipath Rayleigh fading channel is done using the packet preamble and, the combining of the multipath signals in the coherent CCK Rake receiver is achieved as the symbol level combining type. In this paper, in order to validate the utilization of CCK modem for the inter-vehicle communications of the telematics communications, we suggest the CCK modem performance that is made for the multipath Rayleigh fading channel with the mobile speed of 300km/h.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1417-1426
• /
• 2001

Turbulent flow characteristics in the near wake of a square cylinder have been studied experimentally by using a Digital PIV method. Experiments are performed at the Reynolds numbers of 1600 and 3900 based on the free-stream velocity and the square height. The ensemble averaged turbulence statistics are acquired from 2030 realizations of instantaneous fluctuating velocity field after the conventional Reynolds decomposition. The differences in turbulent intensity and Reynolds shear stress profiles fur both oases indicate that the effect of Reynolds number seems to be descernible mainly due to the occurrence of transition in the separated shear layer. Because of the periodic nature of vortex shedding process, transverse velocity fluctuations contribute dominantly , to turbulent kinetic energy distribution. A comparison with previous LDV data obtained at much higher Reynolds number shows a fairly good agreement each other. It turns out that the effect of Reynolds number diminishes as increasing Reynolds number, which is a well-known feature of a sharp-edged bluff body wake. The streamwise variation of turbulence intensities are compared with those from a circular cylinder along the centerline at the same Reynolds number. The overall magnitudes and the decay rates of turbulence intensities are quite similar, but some differences are noticeble especially in the transverse intensity variation.

• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.469-475
• /
• 2005

An integrated photonic microwave bandpass filter has been proposed and demonstrated incorporating a coherently coupled microring resonator in low-loss polymers. The proposed device may feature compact site, simple structure, tuning via the thermooptic and electrooptic effect, and flexible integration with other electrical and optical devices. The resonator was designed to have an extremely small bandwidth so that it could be used to selectively pass the optical signal carrying the microwave signal to attain efficient bandpass filtering. We made and tested two resonators with a single ring and double rings, and performed a theoretical fitting of their measured transfer curves to predict the performance of the microwave filters based on them precisely. It was found that as the number of the rings used for the resonator increases, the bandwidth gets smaller, the rolloff sharper, and the band rejection higher. Finally our filter exhibited the center frequency of 10GHz, the 3-dB bandwidth of 1.0GHz, the corresponding quality (Q) factor of 10, and the rejection outside of the passband of more than 25dB.