• Food Science and Preservation
• /
• v.8 no.1
• /
• pp.37-46
• /
• 2001

To examine the effects of edible coatings on the quality of fresh-cut fruits, Shingo pear was coated with several concentration of albumin, WSF(whole soy flour), dextrin and SPE (sucrose polyester) solution and quality characteristics, sensory evaluation and respiration rate were determined during storage at $4^{\circ}C$ for 10 days. Weight loss rate was reduced in coated fresh-cut pears. 2% dextrin and 1% WSF for pears were more effective in reducing weight loss rate during storage. In preventing the browning of fresh cut fruits, browning was inhibited by coating with 0.5% WSF, 1% albumin, 3% dextrin for pears. Compared with non-coated pears, 0.5% WSF, 1% albumin and 3% dextrin coating were effective in inhibiting the color changes. Even if hardness had a tendency to decrease in coated and no71-coated fruits during storage dextrin coating induced texture softening in fresh-cut pears. The changes in decrease of titratable acidity and vitamin C content and increase of pH and soluble solid were recessed by coatings but there was no differences in accordance with coating materials. Sensory evaluation of coated pears was conducted in according to coating materials and concentrations. Pears coated with 0.5% albumin, 4% dextrin, 1.0% SPE and 0.5% WSF recorded high sensory score. Among the tested coating materials and concentrations, 4% dextrin was the best in all organoleptic quality of coated pears. Respiration rate was repressed by coating with WSF and dextrin in pears.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.3
• /
• pp.216-220
• /
• 2002

In this study, edible coatings for ‘Niikata’ pears have been applied in order to provide an alternative way to control and extend market quality and shelf life during cold storage. Fruit treated with edible coatings had better effects on maintaining some quality features such as fresh weight, firmness and SSC content than non-coated fruits. However, non-coated fruits in terms of overall quality were better evaluated than fruit with edible film. It may be caused by various factors such as film thickness effect oil emulsion on fruit skin, unknown reactions between the fruit skin and functional groups in the chitosan structure and so on.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2011

The study was performed to evaluate rice seed germination, seedling emergence and seedling establishment under different coating materials such as iron powder, silicate powder and silicate coverage after direct seeding. There were differences among coating materials as follows; 1. In seedling establishment there was the highest in untreated control> silicate-coated seeds and silicate coverage>iron-coated seeds. In case of untreated control this result due to laboratory experiment unlike field conditions where has been constraints in bird damages, seed dry under strong sunlight and buoyance after rainy and/or irrigation. 2. Thus, there was the highest in untreated control>silicate-coated seeds>silicate coverage>iron-coated seeds, respectively. 3. Total fresh weight(shoots and roots) of the seedling was also highest in untreated control>silicate-coated seeds and silicate coverage> iron-coated seeds.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.15 no.1
• /
• pp.63-73
• /
• 2013

The research was conducted to determine a seed germination and seedling establishment of rice plant under seed coating materials such as iron, silicate, and phyllite and under covered with silicate and iron coated & silicate covered in the puddled wet hill seeding and wet line seeding methods. The seedling establishment was high in silicate and untreated control of 100%>phyllite coating of 91.5%>silicate coating of 88%>iron coating and silicate covered of 86%>silicate covered of 75.5% in the puddled wet hill seeding method, respectively. At 35days after treatment there was high in seedling height at silicate covered of 23.8cm>control of 23.6cm>silicate coating of 21.4cm>phyllite coating of 20.2cm>iron coating and silicate covered of 16.8cm>iron coating of 15.4cm. In puddle wet line seeding method rice seedling establishment was high at control and silicate covered of 100%>iron coating and silicate covered by 97.5%>phyllite coating by 94.8%>iron coating by 86%. Seedling height was high in silicate covered of 22.1cm>control of 21.2cm>silicate coating of 20.0cm>phyllite coating of 19.0cm>iron coating of 17.7cm>iron coating and silicate covered of 17.0cm, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.84-90
• /
• 2013

In this study we propose an effective method, Coating processing methods, which can improve the quality of recycled aggregate relatively easily without new equipment investment and complex treatment process and verify the improved effect using the devised method, Coating processing methods. To attain the research aim we used adequately diluted silicate solution for coating and carried out several property valuation for twelve types of material with different coating method. Also we formed concrete with coated aggregates which showed the best property. In conclusion the aggregates with the method of repeated impregnation in the silicate and drying showed the most excellent quality while other coating methods also resulted in an improvement of aggregate quality but failed to meet the KS Standard. Lastly with the optimal material we could obtain the approved compressive strength from the concrete allowing it to be utilized for road facility of which standard compressive strength of design is under 24MPa.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1061-1065
• /
• 1999

The effect of particle size of coating powder and coating temperature on the thickness of coating layer formed on metal surface was studied by using XRD, SEM and EDXS. Coating powder was separated according to particle size by 3 steps and coating temperatures were varied from $950^{\circ}C$ to $980^{\circ}C$. Calorizing carried out at air and Ar conditions for 5 hrs, respectively. XRD result show that $Al_2O_3$ and AlN were formed during calorizing at air condition. The thickness and Al content of coating layer increased as the particle size of coating powder decreased and coating temperature increased.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.300-300
• /
• 2014

해양환경 하에서 대형 강구조물의 경우 장기간 부식손상을 방지하기 위해 아크 용사코팅 기술이 오래전부터 유용하게 이용되어 왔다. 아크 용사코팅 기술은 타 용사코팅 기술에 비해 경제성과 생산성이 뛰어나 대형 강구조물에 적용되고 있다. 용사재료로는 Al, Zn 또는 그 합금들이 주로 사용되어 강재에 대해 희생양극 방식효과를 나타낸다. 그러나 아크용사에 의해 적층된 코팅 층은 용사공정 중 불가피하게 수많은 기공과 산화물이 포함되어 내식성 및 내구성에 악영향을 미치게 된다. 따라서 본 연구에서는 알루미늄 합금의 용사코팅 층에 대하여 다양한 후처리를 통해 내식성과 더불어 내구성을 향상시키고자 하였다. 용사코팅은 알루미늄 합금 선재(1.6 ${\varnothing}$)를 사용하여 아크용사를 실시하였다. 용사 시 용사거리는 200 mm, 공기압력은 약 $7kg/cm^2$ 정도로 유지하면서 용사코팅을 실시하여 약 $200{\mu}m$ 두께로 코팅 층을 형성시켰다. 이후 용사코팅 층의 표면에 다양한 후처리재를 적용하였으며, 내구성을 평가하기 위하여 후처리 적용 전후 시험편에 대하여 캐비테이션 실험을 실시하였다. 캐비테이션 실험은 ASTM G32-92에 의거하여 주파수 20 kHz의 초음파 진동 장치(ultrasonic vibratory device)를 사용하였다. 그리고 시험편 표면과 발진 혼에 부착된 팁(tip)과의 거리는 1 mm로 일정하게 유지시킨 뒤, 캐비테이션 발생 시간을 변수로 하여 실험을 실시하였다. 손상된 용사코팅 층의 표면은 주사전자현미경과 광학현미경으로 관찰하였으며, 시험편 손상깊이는 3D 현미경으로 비교 분석하였다. 또한 캐비테이션 실험 전후의 무게를 측정하여 무게 감소량을 상호 비교하였다. 그리고 전기화학적 실험은 천연해수 속에서 자체 제작한 홀더(holder)를 이용하여 $0.33183cm^2$의 용사코팅 층만을 노출시켜 실시하였다. 그리고 기준전극은 은/염화은 전극을, 대극은 백금전극을 사용하였다. 분극실험을 통해 후처리 적용에 따른 용사코팅 층의 부식전위 및 부식전류밀도를 비교 평가하였다. 그 결과, 용사코팅 층에 의하여 강재에 대한 희생양극 방식전위가 확보되었으며, 후처리재가 적용된 용사코팅 층에서 내식성 및 캐비테이션 저항성이 향상되었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.36-36
• /
• 2007

AZ31 Mg alloy plate 표면에 대기압 플라즈마 처리, MgO 코팅, 유기단분자막 형성, sol-gel 코팅등의 표면 처리를 한 후 내식성의 변화를 조사하였다. 대기압 플라즈마는 O2, Ar 개스를 사용하여 처리하였고, MgO 코팅은 sputter를 사용하였으며, 유기 단분자막으로는 Octadecyltrimethoxy silane을 기상유기박막 코팅하였으며, sol-gel 코팅은 dipping 방법을 이용하여 샘플을 제작하였다. 마그네슘 판재는 buffing 공정으로 표면 처리된 것을 사용하였으며, 아세톤 및 에탄올을 이용하여 초음파 세척하여 사용하였다. 표면처리된 시험편을 염수분무법으로 내식성을 평가하였으며, sol-gel 코팅 층의 젖음성 특성 및 xps를 이용하여 내식 특성에 미치는 표면 효과를 분석하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.60-60
• /
• 2011

막구조는 근래에 와서 대공간 구조 및 지붕구조에 가장 보편적으로 사용되는 경량 인장 구조물로 각광받고 있다. 구조용 막재는 풍하중 및 설하중에 충분히 감당할 수 있도록 강도와 내구성을 가지고 있어야 한다. 일반적으로 막구조 재는 PVC코팅 폴리에스터막, 실리콘코팅 유리섬유막, PTFE코팅 유리섬유막이 있다. 제직되는 원단의 크기가 한정되어 있기 때문에 재단 후 접착하여 제작한다. 이 때문에 이음부분이 나 재단부분에 코팅으로 인한 접착이 어려워 고온고압으로 접착을 한다. 이 연구에서는 실리콘코팅 유리섬유막의 접착시 어려움을 보완하기 위해 저온 Plasma를 이용한 처리법으로 방전에 의해 Plasma를 발생시켜 50w, 100w 출력으로 10분, 20분간 처리하여 그 결과를 접촉각과 SEM 관찰을 통해 표면처리를 관찰하였다. Plasma 처리로 인해 실리콘 표면층에 균열이 발생하고 표면이 갈라짐을 확인할 수 있었다. 접촉각측정 결과 Plasma 출력과 시간의 증가함에 따라 접촉각은 감소하였다. 실리콘코팅 원단에 저온 Plasma 처리한 후 표면 특성을 분석하고 원단을 접착을 시켜 박리 강도를 측정함으로써 막구조 원단의 접착력 향상에 대한 연구를 진행하였다. KS K 0533 접착포의 박리 강도 시험방법으로 실리콘코팅 원단의 박리 강도를 측정한 결과 플라즈마 처리 원단이 플라즈마 미처리 원단보다 박리 강도가 향상된 것을 확인할 수 있었다. 저온 Plasma 처리 시간이 증가할수록 표면의 젖음성을 향상시켜 접촉각을 낮추었다. 이는 곧 표면에너지의 증가를 뜻하는 것으로 접착력을 증가시켜 실리콘코팅 원단의 접착성을 시킴으로써 강한 강도와 내구성을 갖춘 막구조물의 개발에 기대되고 있다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.144-146
• /
• 2011

플라스틱 기판 PC 또는 ABS에 플라즈마 처리하여 접촉각을 낮출 수 있었다. Cr, Ag 등의 금속으로 스퍼터링하여 반사도 90% 이상으로 고반사 필름을 플라즈마 처리된 플라스틱에 코팅하였다. 금속질감을 갖는 표면에 컬러 코팅하여 다양한 색상을 구현하였고, 산화물 코팅층의 물성과 천이영역에 대하여 고찰하였다.