• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.218-222
• /
• 2003

본 연구의 목표는 난연화를 위한 기존 공법의 단점 보완과 환경 친화적인 난연제를 사용한 비 난연 XLPE 케이블의 난연화 방법과 최적의 난연 코팅액 배합에 있다. 전력용, 통신용 둥과 같이 고난연성이 요구되는 경우 기존 컴파운드 방법으로는 난연제를 다량으로 첨가하여 사용하며, base polymer와의 혼합성, 기계적인 물성에도 영향을 끼쳐서는 안 되는 등 여러 가지 요구 조건을 만족시켜야 하는 문제점을 가지고 있다. 각 난연 코팅액에 따른 코팅 표면을 고찰한 결과 모든 코팅의 표면은 깨끗하였으며, 코팅층의 두께는 약 10-20㎛로 일정하게 코팅이 되었다. TBBA/Sb₂O₃, TBBA/Zinc Borate의 무게비(wt%)가 1:0.7 이상부터 난연 효과를 보였다. 또한 Mg(OH)₂/Zinc Borate의 경우는 무게비(wt％)가 1:0.5, 1:0.6에서 난연효과를 보였으나, 1:0.7 이상에서는 난연 효과가 떨어지는 현상을 보였다. Mg(OH)₂/AF100 S/Zinc Borate의 경우는 AF100 S의 첨가량이 증가할수록 난연성이 향상되었다. 난연 코팅액의 열 분해 거동을 비교한 결과, Mg(OH)₂/Zinc Borate의 경우 초기 분해 온도가 유기계 난연제를 사용하였을 경우보다 늦어졌으며, 최종 잔류 탄화물 양도 많이 생성되었다. Mg(OH)₂/AF100 S/Zinc Borate의 경우 난연 효과를 상승을 위해 인계 난연제(AF100 S)를 첨가하였으나. 오히려 초기 분해온도가 빨라졌으며 잔류 탄화물의 양도 적게 나타났다. 그러나 연소 테스트 결과 가장 우수한 난연 효과를 보였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.12
• /
• pp.2019-2027
• /
• 2013

In this study, we tried to develop a coating agent for the fresh-cut fruits used in cakes. First, the coating agent mixing ratios of sugar, pectin, sodium alginate, carrageenan, xanthan gum, vitamin C, and purified water were selected to be 55, 2, 2, 0.04, 0.1, 0.05, and 40.81% (w/w), respectively. In a freeze-thaw stability of the coating agent, the viscosity remained constant for 3 cycles of freezing and thawing repetition process, but showed a slightly decreasing trend in the 4th repetition process (P<0.05). On the other hand, the sugar content, pH, and chromaticity remained constant even in the 4th repetition process. Pineapple coated with the coating agent had smaller weight loss, hardness changes, and total bacteria distribution compared to the uncoated pineapple (P<0.05). In the chromaticity, both of the two pineapples experienced browning with increasing storage duration, as L value decreases and b value increases. However, when the color difference was compared, the progress of browning for the uncoated pineapple was faster than the coated pineapple. Also, the progress of browning at $4^{\circ}C$ was found to be slower than the progress of browning at $25^{\circ}C$. Therefore, the storage stability of the fresh-cut fruits could be improved by coating the fresh-cut fruits for cakes with the coating agent and storing at a low temperature, which would contribute to extending the shelf-life of cakes.

• Journal of the Korean Ceramic Society
• /
• v.38 no.2
• /
• pp.122-127
• /
• 2001

수열법으로 합성한 헥토라이트 점토(SHC), 아크릴 라텍스 및 코팅첨가제들을 배합하여 성분이 다른 수성코팅제(WBC-0, WBC-1, WBC-2) 3종류를 제조하였다. 제조한 수성코팅제(WBC)의 pH, 용액점도 및 고형분을 조사하였고, 전단력에 따른 유동성을 레오메타로 측정하였다. 또한 WBC로부터 주조된 필름의 열안정성과 투명성을 각각 TGA와 UV-VIS 분광광도계로 조사하였다. SHC가 8 phr 포함된 WBC-2는 전단력에 따라 졸과 겔의 상전이 현상, 즉 요변성을 나타내었으며 이로 인해 저장안정성이 우수하였다. 주조한 WBC-1과 WBC-2 필름의 초기분해온도와 투명성은 시판 WBC(OP-55W)의 필름보다 각각 99.6~110.2$^{\circ}C$와 20.9~21.7%의 범위로 증가하였다. 결과적으로, SHC가 함유된 WBC는 수팽윤성 점토에 의해 내열성과 용액점도의 증대효과가 나타났다.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.3
• /
• pp.1-10
• /
• 2021

The purpose of this study is to present the possibility a utilization of the tertiary mudstone in Pohang as road subsoil material through pilot experiments on the road embankment structure. This mudstone is an unconsolidated rock that is distributed in the soft rock sedimentary layer, the tertiary layer of the Cenozoic, and causes physical problems such as slaking, swelling, and reduced shear strength and chemical problem like acid drainage. In order to solve various complex problems, an laboratory mixing test was conducted, and the optimal mixing conditions of the tertiary mudstone (90%), composite slag (steel making 70%, blast furnace 30%), and neutralization and coating agent treatment were derived. In order to prove its utilization, a real-scale road embankment structure was constructed and tests were conducted for each section. The pre-processing section is stable due to the design of optimal mixing conditions, while in post-processing section, natural weathering proceeded rapidly, and structural problems were concerned. Since the effect of neutralizing and coating agents was confirmed in temporary-staking section, the neutralizing and coating agents can be applied during the temporary storage period.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.84-87
• /
• 2009

본 연구는 건축용 바닥재로 널리 이용되는 PVC 상재의 표면을 열에 의한 손상으로부터 보호하기 위하여 기존에 사용하는 광경화형 우레탄-아크릴 수지에 내열성(anti-cigar burning)을 향상시킨 광경화형 수성도료 개발에 관한 것이다. PVC 바닥상재용으로 사용되는 내열기능성이 없는 우레탄-아크릴 수지에 인계화합물을 주원료로 합성한 내열재, 구아니딘을 주원료로 합성한 내열재, 일시적 방염제로 사용되는 제 2인산암모늄을 수지의 양 대비 함량(wt%)을 10, 20, 30%로 변화하여 첨가한 후 배합하여 수지의 내열성을 향상시킨 코팅액을 제조하였다. 제조한 코팅액은 코팅층의 두께조절이 가능한 Bar-coating을 사용하여 PVC 바닥상재에 코팅한 후, 내열성, 부착력, 내화학성, 코팅두께 등의 코팅층 표면물성을 평가하였다. 연구결과, 수지에 인계화합물을 주원료로 합성한 내열재 30%를 혼합하여 제조한 코팅액을 Bar-coater No.12로 코팅한 코팅표면이 열에 의한 손상이 가장 적고, 부착력 100%, 내화학성 양호로 가장 좋은 물성을 보였다. 전반적으로 내열재 함량이 높고 코팅 두께가 두꺼울수록 내열성이 우수한 것으로 나타났다.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.449-455
• /
• 2005

Electron beam (EB) and ultraviolet (UV) curable monomers (AF-1 with mono functionality and AF-2 with tetra functionality) containing hydroxy and acrylate group for anti-fogging coating were synthesized and applied to EB and UV-curable coating systems. The synthesized reactive AF-1 and AF-2 monomers were first formulated into UV-curable system and the optimization of film properties for anti-fogging coating was investigated. The 5:17.5 ratio for AF-1 and AF-2 was found to be the best optimized formulation for anti-fogging coating without destroying the other essential properties such as hardness, solvent resistance, and adhesion. The optimized formulation was applied to the EB-curable system, and EB and UV-curable systems were compared. The results demonstrated that both EB and UV-cured films coated on PC sheet showed excellent anti-fogging properties; however, the EB-cured film exhibited better hardness, adhesion, and water repellent properties than the UV-cured film.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1773-1777
• /
• 2010

The Application of UV curing technique for poly (vinyl chloride) (PVC) floor tiles coating has improved the quality of PVC floor. Several formulations were made including acrylated oligomers based on a polyurethane were blended with reactive monomers, photoinitiators and other additives. The used oligomers are commercial aliphatic urethane acrylates. Thin films were prepared on PVC tiles by bar coating with different formulations using UV radiation. The coating resins were characterized by FTIR. The properties of UV-cured films such as gloss and adhesion were examined. The properties of UV-cured films dependent on the influence of composition and processing conditions was studied.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.339-342
• /
• 2008

본 연구는 현재 국내에서 다량 사용되는 중금속 크롬과 납이 포함된 녹색안료를 대체하기 위해 유동층화학기상증착(FB-CVD) 공정을 이용한 환경친화적 무독성 유 무기 복합 녹색안료의 개발을 목표로 하였다. 기초실험으로 여러 가지의 담체 표면특성(SEM)과 성분(EDXS)을 고찰한 결과 1차 실험담체로 CaCO3를 선정하였다, 코팅안료 배합에 있어 다양한 종류의 계면활성제를 처리한 후 제조한 녹색안료의 색상발현 실험을 한 결과 건조상태나 색상발현에서 녹색물질 배합농도에 차이를 보였으나, 음이온계면활성제를 사용한 계면활성제 3이 안료 건조와 색상발현에 가장 적합하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1741-1746
• /
• 2010

This study is on development of UV-cured anti-stain coating compounds which have more improved anti-stain function to prevent a surface of PVC tile from stain. To make an anti-stain coating composition, water soluble antistatic agent made from ammonium(IV) salt, antistatic agents for acrylic and polyurethane were used. Their contents varied from 5 to 20wt% against quantities of resin in coating composition. After coating PVC tiles using bar-coating method that can adjust a thickness, we estimated surface properties of coated layer such as anti-stain, electric resistance, adhesive power, thickness of coating, and so on. Results showed that a coating composition added 15wt% of water soluble antistatic agent and coated with No.12 bar-coater had the optimum surface property in electric resistance($3.24{\times}10^9{\Omega}/cm^2$), anti-stain(ink Test, Dust Test) and adhesive power. We could also find electric resistance and anti-stain effect were improved as antistatic agent content increased. However, excessive addition of antistatic agents(over 20wt%) caused the migration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.608-613
• /
• 2010

This study is on development of UV-cured water soluble coating composition which have more improved anti-cigar burning to prevent a surface of PVC tile from damage of heat. To make an anti-cigar burning coating solution, thermostable agent that synthesize main materials phosphorus compound, guanidine and ammonium phosphate dibasic used temporary flame retardants, changing their contents from 10 to 30wt% against quantities of resin and compounded. After coating PVC tiles using bar-coating method that can adjust a thickness, we estimated surface properties of coated layer such as anti-cigar burning, adhesive power, chemical resistance, thickness of coating, and so on. Results showed that a coating composition added 30 wt% of phosphorus compound and coated with No.12 bar-coater had the best optimized surface property in anti-cigar burning effect, adhesive power and chemical resistance. Also, we could find anti-cigar burning effect was improved as thermostable agents content and coating thickness increased.