• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.79-79
• /
• 2001

백판지는 포장용기로 사용되기 때문에 인쇄적성 이외에 다양한 후가공적성이 요구 된다. V Varnish Coating도 이러한 후가공적성 중의 하나로서 국내 인쇄소에서는 기계 코팅으로 불리 우며, 목적은 표면에 고분자수지 피막을 입힘으로써 인쇄물의 광택을 높여서 상품가치를 높이고 수운침투와 같은 외부환경의 변화로부터 상품을 안전하게 보관하기 위함이다. arnish C Coating은 인쇄기의 마지막 Unit에서 인쇄와 동일한 방식으로 진행되는데, 코팅액의 배합은 인쇄소와 인쇄물에 따라 상이하다. 본 연구는 Varnish Coating(OI하 기계코팅) 광택향상을 통 한 품질개선 목적으로 수행되었다. 기계 코팅의 특 성 을 파 악 하 기 위 해 서 Gas Chromatography / Mass Spectrometer와 FT -IR Sp e ectrometer를 사용하여 성문운석을 실시해본 결과 코팅액으로 사용되는 광택바니스는 아크 랄과 페놀수지를 툴루엔 계열의 용매에 녹인 용액이고, 흐$\mid$석제로 쓰이는 인쇄바니스는 스티 렌수지를 동일한 용매에 녹인 용액으로 조사되었다. 기계코팅광택 저하현상의 원인파악을 위해서 도공층의 공극구조를 Mercury Porosimeter를 이용하여 파악한 결과 기공의 부피가 상 대적으로 크게 나타났다. 위의 결과를 토대로 기계코팅광택 저하는 코팅액이 과도한 기공부피를 갖는 도공층 내부 로 대부분 홉수되고 표면에 적은 양만이 잔류하기 때문으로 판단하고 해결방안은 도공층의 기공부피를 줄이는 쪽으로 정하였다. Mayor Coater와 QC를 이용하여 Coating Color Formula t tion 번경실힘을 진행하여 도공지 물성을 분석하였다. 그 결과 Double Coating의 Top Color에 서 강력한 상호작용을 하는 Protein과 콜레이를 감량 하고 경질탄산칼숨을 배제하여 기공의 부피를 줄인 경우 기계코팅광택 향상효과가 두드러지게 나타났다. 이러한 Lab 실험을 바탕으로 결정된 Color Formulation에 대한 현장실험을 진행하였고 Lab 평가 및 실인쇄 평가 결과 원하는 수준의 기계코팅광택 향상을 얻을 수 있었다. 몇 차례의 현장실험과 Long-Run Test한 제품들에 대한 물성을 문석한 결과 기계코팅굉택은 인쇄 광택과 같은 경향을 나타냈으며 실협실적으로 간단하게 측정되는 물성 중에서 Air Permeability와 강한 음의 상관관계롤 보였다.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.352-356
• /
• 2014

PDMS modified epoxy resin with epoxy group (EMPDMS) was prepared from the reaction of ${\alpha},{\omega}$-aminopropylpolydimethylsiloxane and diglycidyl ether of bisphenol-A (DGEBA) based epoxy resin, and PDMS modified epoxy hybrid compound (EMPDMSH) was prepared by introducing alkylesteraminopropyl alkoxy silane to EMPDMS. Their structures were characterized using FT-IR, $^1H$-NMR and $^{29}Si$-NMR. Coating materials were prepared by mixing EMPDMSH base and solvent. Physical properties of the coating materials coated on epoxy/glass fiber composite film were measured according to the content of PDMS in EMPDMSH. Contact angle of coating film was increased 30 to 71 degree. Adhesive property of coating film was 5B degree better then epoxy or acrylate coating materials, and surface roughness was decreased as increasing in EMPDMSH.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1773-1777
• /
• 2010

The Application of UV curing technique for poly (vinyl chloride) (PVC) floor tiles coating has improved the quality of PVC floor. Several formulations were made including acrylated oligomers based on a polyurethane were blended with reactive monomers, photoinitiators and other additives. The used oligomers are commercial aliphatic urethane acrylates. Thin films were prepared on PVC tiles by bar coating with different formulations using UV radiation. The coating resins were characterized by FTIR. The properties of UV-cured films such as gloss and adhesion were examined. The properties of UV-cured films dependent on the influence of composition and processing conditions was studied.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.531-540
• /
• 2019

Hydrophilic and hydrophobic nanosilica and tetraethyl orthosilicate (TEOS) as a coupling agent was used to form a coarse spike structure as well as an excellent reactive hydroxyl groups on the glass surface. Then, a second treatment was carried out using a trichloro-(1H,1H,2H,2H)perfluorooctylsilane(TPFOS) solution for ultimate water repellent glass surface formation. The formation of hydrophobic coating layer on glass surface using silica aerosol, which is hydrophobic nanosilica, was not able to form a durable hydrophobic coating layer due to the absence of reactive -OH groups on the surface of nanosilica. On the other hand, a glass surface was first coated with a coating liquid prepared with hydrophilic hydroxyl group-containing nanosilica and hydrolyzed TEOS, and then coated with a TPFOS solution to introduce a hydrophobic surface on glass having a water contact angle of $150^{\circ}$ or more. The sliding angle of the coated glass was less than $1^{\circ}$, which meant the surface had a super water-repellent property. In addition, as the content of hydrophilic nanosilica increased, the optical transmittance decreased and the optical transmittance also decreased after 2nd coating with the TPFOS solution. The super-hydrophobic property of the coated glass was remained up to 50 times of rubbing durability test, but only hydrophobic property was shown after 200 times of rubbing durability test. Conclusively, the optimal coating conditions was double 1st coatings with the HP3 coating solution having a hydrophilic nanosilica content of 0.3 g, and subsequent 2nd coating with the TPFOS solution. It is believed that the coating solution thus prepared can be used as a surface treatment agent for solar cells where light transmittance is also important.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.483-491
• /
• 2016

Even though the antifogging property of nanosilica coated glass surface is highly increased due to the hydrophilic hydroxyl groups on nanosilica surface, the durability of this property on outdoor glass was diminished rapidly after rain washing. In addition the topology of nanosilica coated glass surface plays very important roles to control an light transmittance or antireflection property. To improve these coating durability and characteristics a hydrophilic nanosilica coating on glass was prepared by coating with 1.5 wt% of nanosilica (Ludox) suspension in the presence of hydrolyzed tetraethylorthosilicate (TEOS). The optimum hydrolysis condition of TEOS in acidic or basic aqueous solution was also examined by contact angle measurement. The final transparent hydrophilic coating layer coated with nanosilica-TEOS in acidic condition (pH=4) showed much improved durability of hydrophilic surface as well as higher visible light transmittance than original uncoated glass by 2 % point.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2000.05a
• /
• pp.88-91
• /
• 2000

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.371-377
• /
• 2014

The effect of modification conditions on the physical properties of polydimethyl siloxane modified epoxy (PDMSME) was investigated. The number of ring opened epoxy attached to polydimethylsiloxane (PDMS) by silane coupling agent affected the physical properties of undercoating materials. The flexibility of thin coating was enhanced by PDMSME and the increase of ring opened epoxy attached to PDMS resulted in the increase of hardness by the crosslinking in the present with moisture. The higher molecular weight of PDMS caused the lowering of hardness while the surface contact angle increased due to the high silicone content in PDMS. The viscosity of silicone modified epoxy coating materials decreased with increasing of molecular weight of PDMS due to the lowering of entanglement of PDMSME molecules by acetone solvent and consequently, the smooth undercoated surface was obtained.

• Journal of Adhesion and Interface
• /
• v.8 no.2
• /
• pp.1-8
• /
• 2007

The hard coatings on the polycarbonate plate were performed with the object of substitution the glass in the car to the polycarbonate plate. In this research, (3-glycidoxypropyl)trimethoxysilane (GPTMS), colloidal silica (CS), and (3-aminopropyl)triethoxysilane (APS) were used to prepare the coatings by sol-gel process. The optimum conditions and formulation to get the excellent physical properties of the coating were determined. GPTMS and CS were hydrolyzed in ethanol, and then APS was added in this solution. Using these solution the hard coating were applied to the polycarbonate plate. The smooth coating which got the 2 H class in pencil hardness was formed. And this coating showed excellent abrasion resistant and adhesion property.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.139-139
• /
• 2018

최근 자동차 산업을 중심으로 한 수송용 기기의 경량화 추세에 따라 대표적인 경량금속 소재인 알루미늄 합금에 대한 수요가 증가하고 있으며 이에 따라 알루미늄 합금 표면에 다양한 특성을 부여할 수 있는 표면개질 기술에 대한 필요성이 부각되고 있다. 알루미늄 합금의 대표적인 표면처리기술인 아노다이징과 유사한 원리로 표면에 세라믹 코팅층을 형성할 수 있는 기술인 플라즈마 전해 산화(Plasma electrolytic oxidation, PEO)가 주목을 받고 있다. PEO 코팅법은 전해액 내에 소재를 침지시키고 400 ~ 600V에 이르는 고전압을 인가시켜 마이크로 방전을 유도하여 표면에 치밀한 세라믹 층을 형성시키는 기술이다. 본 연구에서는 PEO법으로 표면 개질된 Al 합금 표면의 표면 조직 특성과 전기화학 특성을 평가하고, 코팅층 특성에 미치는 공정 변수의 영향을 분석하고자 하였다. PEO 처리를 위해 사용된 소재는 상용 Al 합금 판재(Al 5083-O)로서 $2cm{\times}2cm$로 절단하여, 에머리페이퍼로 1000번까지 연마하여 사용하였다. 시험을 위한 PEO 처리 시스템은 전해액 수조, 일정 온도 유지를 위한 열교환기와 칠러, 전원 발생을 위한 전원공급기(power supply)로 구성되었다. 전해액은 약 알칼리 수용액을 이용하였으며, 전원 공급기를 통해 시험편에 펄스 전류를 인가하였다. PEO 처리 후 시편에 대하여 SEM, EDS, XRD 등을 이용한 표면 특성 평가를 실시하였다. 또한 코팅층의 전기화학적 부식 특성 평가를 위해 해수용액에서 동전위분극실험을 실시하였다. 시험 결과, Al 합금의 PEO 처리 시 내식성은 개선되는 것으로 확인되었으며, 공정변수는 표면의 미세조직 및 전기화학적 특성에 큰 영향을 미치는 것으로 나타났다.

• Proceedings of the Korean Society of Food and Cookery Science Conference
• /
• 2003.05a
• /
• pp.96-96
• /
• 2003

본 연구는 뽕잎추출액의 농도물 1.0, 1.5, 2.0%로 달리하여 일반 멥쌀에 코팅한 뽕잎쌀의 가수율을 달리하여 취반한 후 밥맛을 관능검사하여 최적가수율을 알아내고 뽕잎쌀의 수분함량, 수분흡수율, 뽕잎쌀밥의 수분함량, 색도 및 물성을 측정하고 뽕잎쌀밥의 구조를 SEM으로 관찰하여 뽕잎쌀의 최적코팅율을 알아보았다. 뽕잎쌀의 수분함량은 뽕잎추출액을 코팅하지 않은 쌀보다 낮았으며 이중 2.0%코팅한 쌀의 수분함량이 가장 낮았다. 뽕잎쌀의 최대수분흡수율은 침수 30분에 20%의 수화율을 보였으나 코팅율과 침지수온(1$0^{\circ}C$, 2$0^{\circ}C$, 3$0^{\circ}C$)에서의 유의적 차이는 없었다. (중략)