• 전기의세계
• /
• v.25 no.5
• /
• pp.3-12
• /
• 1976

일본에서는 송전전압 500kV 이상의 전압에 의한 송전을 초초고압송전이라고 부르고 있다. 1952년 신북육간선이 초고압 275kV로 운전개시한 이래 1973년 초초고압 500kV 방총간선이 운전개시하기까지의 약 20년간 초고압 275kV 송전이 주간선으로서 활약하였다. 500kV 송전을 실현하는데 있어서 해명해 두어야 할 기술적 문제에는 여러가지가 있겠지만 우선 송전전압이 275kV의 2배가까이 승압됨으로 여기에 따른 송전선료 및 변전소의 외부전연 및 변압기의 절연문제등이 큰 문제로 될 것이다. 여기서는 1.운전전압과 송전용량에 대해서 2.운전전압 및 상용주파과전압에 대해서 3.송전선의 코로나방잔과 도체설계에 대해서 4.송전선의 절연설계에 대해서의 4가지 문제에 초점을 맞추어 그 내용을 간단히 설명하여 보기로 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.65-71
• /
• 2002

Characteristics of corona discharge of the different types of the plasma reactors which are cone-hole and cone-plate is investigated experimentally. The discharge starts at lower voltage for the cathode corona than the anode corona and spark occurs at higher voltage for the cathode corona. And the cathode corona makes more stable discharge than the anode corona. The effect of the base gas in corona discharge for different O$_2$/N$_2$ concentrations is related with the gas molecular weight. The discharge for the smaller molecular weight gas occurs easier than for the high molecular weight gas. The discharge current decreases with the increase of oxygen concentration and it increases more sharply for anode corona than for cathode corona as discharge voltage increases after corona onset voltage. NO-NO$_2$ conversion increases with the energy density of corona discharge and the addition of O$_2$ in a base N$_2$ gas.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.27-34
• /
• 2002

In this paper, characteristics of the ac and dc flashover voltage in the horizontal air gap of a needle-needle electrode system were investigated when the combustion flame was present near the high-voltage electrode. In order to examine the flashover phenomena and the corona inception voltages caused by flame we measured the voltage and current waveforms when the corona and the flashover was occurred. We also observed, as increasing the applied voltages, the deflection or fluctuation phenomena in the shape of flames caused by the corona wind and the coulomb's force. As the results of an experimental investigation, we found that the reduction of flashover voltages, in comparison with the no-flame case, are 62.7[%] for k=1.0, 34.2[%] for h=5[cm], 27.3[%] for h=7[cm] and 21.4[%] for h=9[cm] when ac voltage is applied.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.67-74
• /
• 2008

In this paper we describe discharge characteristics between needle-to-plane electrodes in water in various conditions such as different impulse voltages, polarities and water resistivities. Streamer corona is initiated at the tip of needle electrode and propagates toward plane electrode, and it experiences the final jump across the test gap. The branched channels of streamer coronas for lower water resistivities are much thicker and brighter than those for higher water resistivities at the same level of applied voltage. The negative streamer coronas not only have more branches but also widely spread out compared to the positive streamer coronas. A number of pulse-like currents ranging from some hundreds mA to a few A after streamer corona onset were produced with discharge developments. The time-lags-to breakdown for the positive polarity were remarkably shorter than those for the negative polarity. The pre-breakdown energy supplied into the test gap was inversely proportional to water resistivity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.248-248
• /
• 2011

유전체 모세관을 이용한 해수에서의 펄스고전압 방전 특성을 연구하였다. 내경 1, 2, 3 mm의 구멍이 뚫린 Quartz 블럭에 외경 1, 2, 3 mm의 SUS 핀을 삽입하였고 삽입된 핀의 끝이 해수에 담구어 지도록 하여 고전압 방전을 발생 시켰다. 인가된 펄스 고전압은 5 kHz의 반복 주파수를 가지며, Pulse 폭을 $1{\sim}2.5{\mu}sec$까지 변화 시켜 전압전류 파형과 방전양상을 살펴 보았다. 방전은 펄스폭 변화에 따라 전해전도 전류에 의한 모세관 가열, 모세관내 미세기포형성, 기포내의 코로나 방전 개시 그리고 글로우 또는 아크방전으로 발전하는 것을 확인하였다. 모세관의 길이는 각각의 구경에 대하여 5 mm, 10 mm 두 가지로 변화하여 실험하였고, 모세관 길이 10 mm 조건에서는 방전이 매우 불안정 하였다. 각각의 방전조건별로 1~5분간 방전을 진행하여 해수내의 유리염소의 농도 변화를 살펴본 결과 방전모드가 글로우 또는 아크 방전 모드에서 단위 에너지당 유리염소 발생 수율이 큰 폭으로 증가하는 것을 확인할 수 있었다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.7
• /
• pp.572-578
• /
• 2001

This study conducts a laboratory measurement on a cylindrical electrostatic precipitator(ESP) with a 30mm-diameter cylinder. Several kinds of test aerosols are generated with an atomizer and a diffusion dryer. The effects of applied voltage, flow state, gas velocity, and gas temperature on the electrical characteristics of the precipitator and onset of corona are experimentally investigated. The corona onset voltage is decreased, as diameter of discharge electrode wire becomes small or temperature of the precipitator increases. As the fluid velocity or particle load in the precipitator increases, the corona current is decreased.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1745-1750
• /
• 2017

Starting from the distribution transformer, the insulation oil for the oil immersed power transformer is being used to convert the vegetable oil from the existing mineral oil. Vegetable oil is better in temperature characteristics and insulation performance, is not toxic, and has better biodegradable characteristic than that of mineral oil. In order to investigate the corona inception voltage and dieclectic charateristics of the two insulating oils, three oil immersed transformers using mineral oil and vegetable oil were made and thermal cyclic aged. In this paper, the changes in the corona discharge inception voltage, chemical and electrical properties of the two sampled insulating oils from the transformers had been studied.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.5
• /
• pp.20-27
• /
• 2001

In this paper, the AC breakdown characteristics of pure Ar and $N_2$gas with gas pressure range of 58.8~137.3[kPa] under uniform and non-uniform fields were investigated, and the measured values were compared with those in Ar/$N_2$gas mixtures with pressure varying. Summarizing the experimental results, the breakdown voltages of pure $N_2$gas, under uniform and non-uniform fields, were increased about 4.8 and 1.1 times than those of pure Ar gas, and the AC breakdown voltage increased with the pressure increasing. The breakdown voltages of Ar/$N_2$ gas mixtures were decreased with decreasing the mixture ratio of $N_2$gas. In case of Ar(85%)/$N_2$(15%) and Ar(70%)/$N_2$(30%) gas mixtures comparing to the pure Ar gas, the breakdown voltages under uniform field were increased about 1.5 and 2.1 times, and under non-uniform field were increased about 1.1 and 1.3 times at the pressure of 101.3[kPa]. Also, corona inception voltage of Ar(70%)/$N_2$(30%) gas mixtures under non-uniform field were increased about 1.5 times than those of pure Ar gas.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.106-113
• /
• 2002

In this paper, breakdown characteristics of pure Kr, Ar and $N_2$gas with gas pressure range were investigated, and the measured values were compared with those in Ar/$N_2$and Kr/$N_2$gas mixtures with pressure varying. Also, various characteristics with gas mixtures in practical incandescent lamps were investigated. Summarizing the experimental results, the breakdown voltages of $N_2$gas were increased than those of Kr and Ar gas with large molecular weight, and the breakdown voltage increased with gas pressure increasing. The breakdown voltages of Ar/$N_2$and Ar/$N_2$gas mixtures were decreased with decreasing the mixtures ratio of $N_2$gas, and corona inception voltage of Kr/$N_2$gas mixtures under non-uniform fields were increased than those of Ar/$N_2$gas mixtures. In case of tactical incandescent lamps, luminous and lifetime of Kr(70%)/$N_2$(30%) gas mixtures were increased about 94[lm] and 380[hr] than those of Ar(70%)/$N_2$(30%) gas mixtures. and injection pressure of gas mixtures with cooling temperature of 20[$^{\circ}C$] in incandescent lamps were increased about 13[%] than those with cooling temperature of 40[$^{\circ}C$].