• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.236-239
• /
• 1995

In this paper,Upper bound analysis to predict the formation of corner cavity during the final stage of backward extrusion is used. The critical condition for corner cavity formation is obtained by upper bound analysis. The quantitive relationships between corner cavity formation and process parameters are studied. To broaden forming limit area, driven container and multi-step forming process is proposed. As a result of FEM, forming limit is enlarged. And this results is compared with the analytric results

• 조명전기설비학회논문지
• /
• 제19권7호
• /
• pp.26-31
• /
• 2005

본 논문은 무선통신 시스템에 사용되는 저 손실 소형 대역통과 필터를 새로운 프로브 구조를 적용하여 설계 제작하였다. 필터의 저 손실 특성을 위해 Q값이 높은 Ba(Co, Nb)$O_3$계 세라믹 유전체 공진기를 사용하였으며, $TE_{01{\delta}}$ 모드의 공진을 이용하여 금속 캐비티의 도체손실 영향을 줄였다. 소형화를 구현하는 방법으로는 캐비티의 양옆의 공간을 줄이도록 정사각형 캐비티의 코너 공간을 적극 활용하였으며, $12{\times}12{\times}8[mm]$의 초소형 필터를 제작하였다. 제작된 소형 필터의 주파수특성을 측정한 결과, 중심주파수 $f_0$는 9.95358[GHz], 삽입손실은 -1.9[dB], 3[dB]_대역폭은 14.9[MHz], 부하Q는 664로 저손실 대역동과 필터의 특성을 만족하고 있다.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.144-150
• /
• 2000

In this paper, the formation of a corner cavity in the final stage of axisymmetric backward extrusion process is studied by means of upper bound analysis using kinematically admissible velocity. The quantitative relationships between corner cavity formation and process parameters are studied. And analytical results are compared with those of experiment to which plasticine is used. It is found that the analytical results agree well with experimental one. In addition, to restrict the formation of a corner cavity, driven container is applied to backward extrusion and the results are compared with those of FEM. The critical thickness of the bottom of the billet decreases with increase in reduction of area, and increases with decrease in friction. To prevent the formation of corner cavity, the concept of moving container was applied. Throughout this process, the occurrence of a corner cavity is delayed and forming limit area is enlarged.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.846-849
• /
• 2000

In this paper backward extrusion process with lower die rotation was studied to improve the conventional backward extrusion problems ; requirement of large forming machine, the difficulty to selecting of die material caused by high surface pressure, high cost of forming machine caused by improvement of noise and vibration, and etc. In this experiment, model material, plasticine, was used of specimen. The result values of torsional and conventional backward extrusions were analyzed and compared. FE-simulation is used for analysis with DEFPRM-3D. These results show that the torsional backward extrusion is very useful process because this process can obtain the homogeneous deformation, low forming load. Decreasing forming load improves die life and makes it possible to use press of relatively low capacity. Also this process can reduce corner cavity, improve the initial cast-structure, owing to the high deformation and uniform starin distribution.