• Journal of Ocean Engineering and Technology
• /
• v.16 no.5
• /
• pp.56-60
• /
• 2002

본 논문은 고온 고압의 유류 수송용 이중배관의 팽창에 대한 해석적 방법에 대한결과고찰과 해석, 그리고 설계시 응용이 가능한 현상에 대해 논하였다. 고온의 유류수송시 온도를 유지할 목적으로 내부의 수송 배관과 외부의 케이싱 배관사이에 절연체가 쓰여진다.이런 이중배관의 팽창을 조사할 수 있는 간단한 해석적 방법이 개발되었다. 본 논문에서는온도의 분포, 입력, 토질의 저항, 수송배관과 케이싱 배관과의 상호작용 등이 고려되어졌으며, 이 해석적 방법은 심해의 이중배관 해석에 적합하게 개발되었다. 계산의 결과 분석에서고온의 영향이 고압보다 현저한 것이 밝혀졌다.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.2
• /
• pp.117-124
• /
• 2015

Recently, noise reduction in room air conditioner has been one of the most important issues as well as cooling efficiency. A rotary compressor is widely used in room air conditioners. But, the rotary compressor is the dominant vibration/noise source in an air conditioner. A number of studies have been conducted on reducing rotary compressor vibration/noise through improving muffler and resonator design. However, a noise delivering path between compressor and pipe is not fully taken into consideration. In this paper, the vibration analysis model of rotary compressor is modeled using RecurDyn and experimental validation is presented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1100-1109
• /
• 2022

Herein, a case study was conducted on the bilge pumping performance of a 24,000TEU class container ship with an overall length of 400m. Although the bilge system of the 24,000TEU class container ship was designed in accordance with the rule requirements of the Classification Society, the bilge system did not satisfy the 2 m/s requirements of SOLAS Reg.II-1/35-1 under the rated flow rate and maximum flow rate conditions of the bilge pump installed in the ship. In particular, assumptions were made that No.1 ~ No.4 cargo holds were flooded and filled entirely by sea water and the evaluation of bilge pumping performance had been performed for No.1 ~ No.4 cargo holds. According to the evaulation results of the, the mean water velocity at the main bilge pipe for No.2, No.3, and No.4 cargo holds did not meet the 2 m/s criterion. To resolve this problem, in this study, the branch bilge pipe in each cargo hold was changed from 150A to 200A and the mean water velocity at the main bilge pipe for No.2, No.3, and No.4 was calculated as 2.479m/s, 2.476m/s, and 2.459m/s, respectively.