• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.719-727
• /
• 2021

In the field of architecture, retractable devices capable of responding flexibly to the environment have been applied widely to large structures. Among these devices, the aesthetically pleasing retractable membrane is lightweight so that the membrane can be opened easily using only a traction device. On the other hand, because the towed membrane moves as it is connected to the main cable by a trolley, the number of trolleys needed increases in proportion to the roof's area. This study proposes an optimal model for an open-type trolley (OTT), which is used widely in these devices, using topology optimization. The analysis used the ANSYS program. A new model was proposed based on the results and reviewed through the feedback. Through this process, it was possible to develop a prototype with increased durability and reduced weight. For OTT, optimization was performed based on static analysis and the boundary conditions, so three prototypes were designed. A comparison of the proposed trolley with the conventional one under the same conditions revealed an up to 71.04% decrease in volume while the yield-strength reached 8.67 to 11.43%. In conclusion, the optimal trolley proposed was found to be reliable in terms of economy and stability.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.233-235
• /
• 2012

해저보행로봇 CR200은 여러 개의 관절로 이루어진 6개의 다리를 이용하여 해저면에서 보행으로 이동하며 해저 정밀탐사 및 작업을 수행하는 로봇으로, 케이블로 연결된 선상제어실에서 원격 제어된다. CR200 시스템에서는 16개의 카메라가 장착될 예정이며, 취득된 카메라의 영상은 선상제어실의 비디오 컴퓨터로 전송되어 모니터링 및 녹화된다. 설계된 비디오 시스템에서 영상 전송은 전자기 간섭에 의한 화질 열화를 최소화하기 위하여 기가비트의 대역폭을 가진 이더넷과 광케이블을 통하여 디지털 형태로 전송되며, 아날로그 카메라의 영상은 비디오 인코더를 사용하여 디지털 영상으로 변환된 후에 전송된다. 본 논문에서는 CR200의 비디오 시스템의 설계를 소개하고, 실제로 제작하기 전에 설계된 비디오 시스템을 검증하기 위하여 테스트베드를 사용한 통합 테스트 결과를 제시한다. 아직 준비되지 않은 카메라에 대해서는 아이패드의 아날로그 영상 출력을 비디오 인코더의 입력으로 전달하여, 설계된 모든 카메라들이 동작하는 상황을 테스트베드로 실험하였다. 16개 카메라의 영상이 모니터링 및 녹화되는 상황을 테스트베드로 실험한 결과에 따르면, 압축률 10%의 H.264 동영상 압축 알고리즘을 사용할 경우에 30fps 영상의 모니터링 및 녹화에 각각 60Mbps의 전송량으로 비디오 시스템이 정상적으로 동작하는 것을 확인할 수 있었다. 비디오 데이터의 전송은 센서 및 제어 데이터의 전송과 같은 네트워크를 사용하지만, 비디오 데이터의 기가비트 네트워크 사용률은 평균 12%이기 때문에 비디오 데이터 전송으로 인하여 데이터 통신은 거의 영향을 받지 않는다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.2
• /
• pp.120-127
• /
• 2013

Vam Cong Cable Stayed Bridge which has 450m main span length is one of the Central Mekong Delta Region Connectivity Project and is located in Cuu Long Delta Region. It has steel-concrete composite girder with 4 lane and the type of cable is multi strand cable. The improved H-shape pylon and cast-in-place bored piles were applied. High strength concrete is applied for pylon, precast concrete slab and Cast-in-Situ concrete pile to ensure the structural safety. The present paper describe the design specifications and main features of Vam Cong Cable Stayed Bridge design.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.197-205
• /
• 2000

This paper proposes and evaluates a scheme which enhances real-time performance on the Ethernet-based residential network where cable length is very short and most of traffic passes through a specific device. The scheme aims at enhancing deadline meet ratio of the real-time traffic, for example, video stream by means of applying the functionalities such as queue discrimination and early packet discard as well as maintaining network load properly. The design includes the description on hardware interfaces along with the software modules such as scheduler, device driver and connection manager. The simulation results via SMPL suggest that the proposed network can be used as a cost-effective residential network. We also measure the permissible bandwidth for non-real-time traffic without degrading the performance of real-time traffic.

• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.515-527
• /
• 2006

Domestic standards for data broadcasting differ in the fact that satellite broadcasting chose MHP, cable OCAP, satellite ACAP, therefore making reuse of data contents impossible due to the differences. To resolve this problem, this study designed and implemented independent middleware class library for developing data broadcasting contents. To define class library which could bridge between applications and different middleware, standard library developing methods were used; and analysis of procedural application of each middleware was carried out. Based upon the analysis, classes with embedded transform and handle modules were defined to be linked to libraries of each middleware; and to verify the implemented class library, test contents were created to be compared to the existing contents. This kind of contents development by independent middleware class library allows for reuse of data contents easier, and develops an environment for higher quality of contents by reducing the efforts needed to learn each middleware for the developers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.293-305
• /
• 1994

In this paper the efficient channel models of the subscriber loops for the ISDN U-interface digital transmission are presented. Several configuration medels of the loop network are adopted from the CCITT recommendations, and various parameters specifying the physical dimensions are determined in accordance with the measurements of the loop characteristics of Korea. A typical loop interfacing circuit is applied at both ends of the loops and the overall transmissing circuit model is obtained. Based on this circuit model of transmission. 3 types of signal path models, related to transmission, echo, and near end crosstalk noise are defined and their transfer function are respectively derived as the channel models. As examples of the proposed channel models, numerical calculation has been performed for some loop configuration models and the channel responses are investigation in both domains of frequency and time. It is shown that various changes of the loop characteristics can well be explained in terms of the proposed models. And these models can efficiently be used for the simulation of the digital transmission over the subscriber loop.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.43-59
• /
• 2019

The Traffic controller currently used in Korea is a switch control system that directly transfers 220V of high voltage to traffic lights one to one. This method requires a lot of cables, and there are concerns about electric shock. Accordingly, Korea Road Traffic Authority added the digital communication signal controller standard using digital communication method to the standard specification of the communication signal controller of the National Police Agency. Based on these specifications, this paper intended to develop digital communication call controllers. In addition, it was verified that even if the digital communication signal controller and analogue communication call controller were mixed, they could operate in the signal control system currently in operation.

• Information and Communications Magazine
• /
• v.23 no.8
• /
• pp.35-42
• /
• 2006

최근 광대역 서비스에 대한 소비자들의 욕구가 차츰 증가하고 있고 대상콘텐츠도 데이터와 음성 및 비디오까지 포함된 멀티미디어 서비스로 변화함에 따라, 통신서비스 제공업체들은 이에 대한 해결책을 찾는 것이 지상과제가 되었다. xDSL, 케이블 모뎀, 광랜 등 엑세스 네트워크가 잘 발달되어 있는 국내에서도 멀티미디어 서비스의 최종 수신 장치가 될 TV, PC, 오디오 기기 및 전화기 등에까지 네트워크를 연결하기 위해서는 댁내에서 또 다른 홈 네트워크를 구성해야 하는 상황이다. 이러한 홈 네트워크를 가능하게 하는 기술로는 홈 RF, 무선랜, 블루투스 등 무선 홈 네트워크 기술과 IEEE1394, 이더넷, 홈 PNA, 전력선통신과 같은 유선 홈 네트워크 기술로 나눌 수 있다. 무선 홈 네트워르 기술의 경우, 댁내에서의 반사와 감쇄 등의 영향에 의한 음영지역이 존재하는 단점이 있고 또 RF단을 구현해야 하므로 시스템 가격이 올라가게 된다. IEEE1394, 이더넷, 홈 PNA 같은 유선 홈 네트워크기술의 경우에는 댁내 통신을 위해 새로운 선을 포설해야 하는데 이를 위해서는 막대한 시설 투자비가 들어가게 된다. 이 막대한 투자비는 홈 네트워크 구축에 많은 시간이 걸리게 하는 요인이 될 뿐만 아니라, 일반 사용자들이 서비스를 이용하기에는 가격적으로 부담스럽게 된다. 전력선통신 (PLC: Power Line Communication) 은 전기를 공급하는 전력선에 흐르고 있는 상용주파수 50/60Hz의 저주파 전력신호에 고주파 신호를 활용하여 데이터를 실어 나르는 통신기술이다. 집안 곳곳 이미 포설되어 있는 전력선이 이미 하나의 네트워크를 구성하고 있기 때문에 번거롭고 값비싼 추가 배선작업 없이 바로 네트워킹이 가능하다. 이와 같은 이유로 고속 PLC는 설치 용이성, 접근성, 속도 및 비용부분 등에서 경쟁기술에 비하여 여러 장점을 가지고 있다. 젤라인은 국내 전력선통신 표준을 만족하는 24Mbps 고속 전력선통신 칩을 기반으로 다양한 전력선 채널환경 하에서 최적의 통신을 보장하는 전력선 통신시스템을 제공하고 있으며, 이를 소개하고자 한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.187-192
• /
• 2002

The open-connect type eddy current transducer for the flaw detection in continuously connected pipelines was developed. This eddy current transducer is for the on-line inspection of the tubes in industries, to which commercial encircling probes are not applicable. The excitation coil that consists of a ribbon type cable and a flat connector can be opened and closed on purpose. The sensing coils of this transducer are circumferentially arrayed near the outside of the tube wall but axially displaced from the exciter by about one and half tube diameter. In application to steel tubes, and the performance of this transducer was evaluated as a little behind those of magnetic saturation type in signal to noise ratio and flaw size decision, but usable to detect or to locate large size flaws in steel tubes. Surface cracks deeper than 19% of the tube thickness could be detected with good signal to noise ratio.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.4
• /
• pp.287-295
• /
• 2018

This paper presents the results of an exploration of the ferromanganese crusts of Western Pacific Seamount registered by the Korean government. This area has been surveyed with a deep-sea camera and crust samples have been acquired by deep-sea dredging since 2013. On October 18-19, 2017, a united research team from KIOST and KRISO explored two blocks, OSM11 and OSM07, on the seamount using Hemire ROV. A precise survey was conducted on the ferromanganese crusts and sediments covering the slope/top of OSM11 and the middle flat area of OSM07. Rock samples were collected with precise positioning, and HD videos were recorded for 7 hours. This paper discusses the technical issues of this exploration in terms of (1) how to deal with an emergency situation during an electric power blackout, (2) the improvement of the thruster power by adding cooling plugs to the housings of the thruster amplifiers, (3) the relative motion of the depressor by changing the fixing method of the cable terminator, which affects the service life of the cable, (4) a sampling technique for the steep slope of the seamount, (5) integrated navigation under a USBL blackout, and (6) a 3-dimensional image mosaic for visualizing the distribution state of the crusts.