• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.43-48
• /
• 2011

• ETRI Journal
• /
• v.10 no.3
• /
• pp.193-211
• /
• 1988

집적 회로(integrated circuit)의 제작시 설계 규칙에 유연성이 있는 심볼릭 레이아웃 방식의 시스팀 구성을 칩 설계에 적용하는 경우 그 방법을 알아 보았으며, 시스팀의 툴들로서 graphical 에디터의 명령어, 컴팩터의 알고리즘 그리고 영역 탐색에 사용되는 데이터 구조 등을 알아보았다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.1
• /
• pp.69-74
• /
• 2014

An OrthoMTA compacter is made by machining a Ni-Ti alloy wire using tapered helix creep-feed grinding machines. This aim of this study is to find the optimal dressing conditions to sharpen the corner of a cubic boron nitride (CBN) wheel. On the basis of the results of various experiments, it is verified that the most important factors in dressing are the dressing depth and feeding method, whereas the feed rate has less importance for producing a smaller corner R value. The study also finds the optimum dressing depth to reduce the dressing time, a feeding speed and method to stabilize the machining, and the mesh grade for the CBN wheel to make the groove of the compacter deeper.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.3
• /
• pp.7-13
• /
• 1993

Fracture behavior of pre-cracked compact tension specimens made of AISI 4130 steel was investigated using acoustic emission (AE) and ultrasonic C-scan measurements. While each specimen was loaded up to a certain level, various acoustic emission parameters were recorded together with the crack opening displacement (COD). An elastic-plastic finite element analysis was performed to calculate COD and the damage (plastic) zone size ahead of crack tip. Ultrasonic C-scans, in a pulse-echo, immersion mode, were done for mapping the damage zone size. The agreement between the finite element results and the measured COD was satisfactory. Based on AE results, the test specimens were found to show ductile behavior. The slope of the total ringdown counts vs. COD curve was useful to determine the crack initiation. The preliminary C-scan images showed evidence of changes in the amplitude of ultrasonic signal in the damaged region, and the shape and size of the damage zone matched qualitatively with the finite element results. A further work on the damage zone sizing was also pointed out.

• Current Research on Agriculture and Life Sciences
• /
• v.9
• /
• pp.11-20
• /
• 1991

This study was performed to avoid the chemical spraying environment condition during spraying operation for operator's safety through the development of a remote controlled speed sprayer. The summerized results of this study are as followings. 1. The developed VHF electric wave remote controlling system which could operate sixteen type of operation conditions with the circuit channels of 234 was highly adaptable to speed sprayer for the remote control. 2. The commerical wireless telephones adapted the DTMF type electric wave remote control system need not the tranceiver. 3. The wireless electric wave remote control system combined with one-chip microcomputer, which are low cost with compact in size, could be adaptable to the remote control of the speed sprayer for the wheel steering and speed control system, and to the remote control chemical application system.