• The Journal of Korean Association of Computer Education
• /
• v.17 no.6
• /
• pp.9-20
• /
• 2014

With the change of global awareness of Computing education and introspection about Computer education focused on ICT literacy, efforts are being made to reflect computational thinking in the new curriculum. But if computational thinking would be possible at school, it require tremendous cost to prepare computers for school. In this study, we investigate potentiality and constraints of the one board computer to teach computational thinking in school. We study fundamental performance, application of physical computing and programming education, maintenance of the computers, power consumption of the one board computers which is raspberry pi, beagle bone black, and pcduino3. The result of the study show that one board computer can substitute desktop of the school unless tasks related to require massive data storage and processing. We draw a conclusion that Pcduino3 is well-suited for computational thinking education.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.12
• /
• pp.209-216
• /
• 2019

In view of the educational effects and social changes of software education, equal opportunities for software education are needed regardless of general students and students with disabilities. However, studies on software education for general students have been actively conducted, but studies on software education for students with disabilities are insufficient. In this study, we developed a robot education software education program for students with developmental disabilities. Developing robot-enabled software education programs for students with developmental disabilities is meaningful in terms of expanding software education opportunities for all. In addition, the robot-based software education program is easy to motivate students with developmental disabilities with low task concentration, short-term memory, and low sociality. Significant changes will be made not only in terms of management capacity, but also in terms of self-efficacy and confidence.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.111-118
• /
• 2007

KSLV-I which is being developed in KARI is composed with two stages, and adaptor ring is used for coupling stage. Cables for interconnecting between stage is exposed on the outside. Also 8 pyro bolts which are installed in adaptor ring are used for separation of stage. In general, cowl is used for protecting exposed parts or structure which are anxious about damage from outer environment. In KSLV-I, two kind of cowls are designed. The one is umbilical cowl, and the other is pyro bolt cowl. Because cowl is exposed on the outside, heat and pressure load developed from air have effect on cowls. Therefore verification of structural strength through static analysis is required. In this study, static analysis in load condition except heat load is accomplished. In result of analysis, structural strength of pyro bolt cowl is verified. But breakage of umbilical cowl is confirmed in pressure load condition. So design of umbilical cowl is modified for satisfying required structural strength. And structural strength of umbilical cowl through analysis is verified.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.6.1-6.1
• /
• 2010

원자층 증착 기술 (Atomic Layer Deposition)은 기판 표면에서 한 원자층의 화학적 흡착 및 탈착을 이용한 nano-scale 박막 증착 기술이기 때문에, 표면 반응제어가 우수하며 박막의 물리적 성질의 재현성이 우수하고, 대면적에서도 균일한 두께의 박막 형성이 가능하며 우수한 계단 도포성을 확보 할 수 있다. 최근 ALD에 의한 박막증착 방법 중 플라즈마를 이용한 ALD 증착 방법에 대한 다양한 연구가 진행되고 있다. 플라즈마는 반응성이 좋은 이온과 라디컬을 생성하여 소스간 반응성을 좋게 하여, 소스 선택의 폭을 넓어지게 하고, 박막의 성질을 좋게 하며, 생산성을 높일 수 있는 장점이 있다. 그러나 플라즈마를 사용함으로써 플라즈마 내에 이온들이 가속되서 박막 증착 중에 기판 및 박막에 손상을 입혀 박막 특성을 열화 시킬 가능성이 있다. 따라서 플라즈마 발생 영역을 기판으로부터 멀리 떨어뜨린 원거리 플라즈마 원자층 공정이 개발 되었다. 이 기술은 플라즈마에서 생성된 ion이 기판이나 박막에 닫기 전에 전자와 재결합 되거나 공정 chamber에서 소멸하여 그 영향을 최소하고 반응성이 좋은 라디칼과의 반응만을 유도하여 향상된 막질을 얻을 수 있도록 하였다. 따라서 이 원거리 플라즈마 원자층 증착기술은 나노 테크놀러지 소자 개발하기 위한 나노 박막 기술에 있어서 그 활용이 점점 확대될 것이다. 그 적용으로써 리모트 플라즈마 원자층 증착 방법을 이용한 고유전 물질 개발이 있다. 반도체 소자의 고집적화 및 고속화가 요구됨에 따라 집적회로의 크기를 혁신적으로 축소하여 스위칭 속도(switching speed)를 증가시키고, 전력손실 (power dissipation)을 줄이려는 시도가 이루어지고 있다. 그 중 하나로 고유전율 절연막은 트렌지스터 소자의 스케일링 과정에 수반하여 커지는 게이트 누설 전류를 억제하기 위한 목적으로 도입되었다. 유전율이 크면 동일한 capacitance를 내는데 필요한 물리적인 두께를 늘릴 수 있어 전자의 tunneling을 억제할 수 있고 전력손실을 줄일 수 있기 때문이다. 이와 같은 고유전율 물질이 게이트 산화막으로 사용되기 위해서 높은 유전상수 열역학적 안정성, 낮은 계면 전하밀도, 낮은 EOT, 전극 물질과의 양립성 등의 특성이 요구되는데, 이에 따라 많은 유전물질에 대한 연구가 진행되었다. 기존 gata oxide를 대체하기 위한 가장 유력한 후보 재료로 주목 받고 있는 high-k 물질들로는 Al2O3, HfO2, ZrO2, La2O3 등이 있다. 본 발표에서는 ALD의 종류에 따른 기술을 소개하고 그 응용으로 고유전율 물질 개발 연구 (고유전율 산화물 박막의 증착, 고유전율 산화물의 열적 안정성 평가, Flatband 매카니즘 규명, 전기적 물리적 특성 분석)에 대해서 발표 하고자 한다.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.293-300
• /
• 2020

Eucheuma spinosum, red macro-algae, contains carrageenan as the major polysaccharide and is commercially produced in Indonesia, Malaysia, Philippines, China and Tanzania. In this study, E. spinosum was converted to sugar and platform chemicals (5-HMF, levulinic acid, formic acid) via FeCl₃-catalytic hydrothermal reaction. In addition, statistical methodology (3-level 3-factor Box-Behnken design) was applied to optimize and evaluate the effects of reaction factors (reaction temperature, catalyst concentration and reaction time). As a result of optimization, the concentration of 5-HMF was obtained to be 2.96 g/L at 160 ℃, 0.4 M FeCl₃ and 10 min. Optimal conditions of levulinic and formic acids were determined at 200 ℃, 0.6 M FeCl₃ and 30 min, and the concentrations were obtained to be 4.26 g/L and 3.77 g/L, respectively.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.55-55
• /
• 2000

Cylinder machine usually gives more fiber orientation than fourdrinier and has limitation in machine speed because of fiber wash-off caused by centrifugal force in case of adding machine speed. This study aimed at improvement of paper formation and higher productivity by setting up an apron in vat inlet and by adjustment of mould water head. As results, there were improvement of formation and increase of machine speed, which ultimately improve productivity. Setting up an apron successfully decreased fiber wash-off. Fiber orientation and two-sideness of ash distribution became less severe. These results could lead to better dimension stabilities in the CD through mitigation of fiber orientation and also could result in less curl from two-sideness of paper. The proper adjustment of water head inside the cylinder mould proved to be important factor not only in paper formation but also in decreasing paper two-sideness.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.209-220
• /
• 2008

This paper presents the differences in the analysis results according to the underlying layer modeling methods when analyzing the curling behaviors of the concrete slabs on grade under environmental loads. The models of the slab on grade system considered in this study included a three-dimensional(3D) model, a model composed of 3D slab and springs for underlying layers, and a model composed of 2D slab and springs for underlying layers. First, when the underlying layer consisted of one layer, the curling behaviors according to the different models were compared. Then, the underlying layers that consisted of two different materials and thicknesses were considered. The results of this study showed that the tensionless spring model for the underlying layer gave very accurate results when the underlying layer consisted of one layer. However, when the underlying layers consisted of two layers, the spring model for the underlying layers could overestimate the displacements and underestimate the maximum stress with a large elastic modulus of upper underlying layer, a small elastic modulus of under underlying layer, and thick underlying layers.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.182-188
• /
• 2017

Sulfonated poly(arylene ether sulfone) (SPAES)-3-mercaptopropyl silica gel (3MPTSG) composite membranes with improved oxidative stability were prepared for polymer electrolyte fuel cell application. It has been reported that ether part of main chain of aromatic hydrocarbon based membranes were weak to radical attack to decrease membrane durability. In this study, the hydrophilic inorganic particles were introduced by minimizing a decrease in ion conductivity and increasing an oxidative stability. The composite membranes were investigated in terms of ionic conductivity, ion exchange capacity (IEC), FT-IR, TGA and contact angle, etc. As a result, increasing amount of the 3MPTSG resulted in decrease in proton conductivities and water uptakes at 100% R.H. but enhanced thermal and oxidative stabilities.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.63-72
• /
• 1999

For the purpose of improving the wet strength properties of paper, cellulosic fibers were modified by the processes of carbarmoylethylation and N-chlorocarbamoylethylation. Carbamoylethylated cellulose was prepared by the reaction of acrylamide with cellulosic fibers under the alkali catalyst, and N-chlorocarbamoylethylated cellulose was prepared by the addition of sodium hypochlorite into the carbamoylethylated cellulose. In carbamoylethylation reaction, the conditions of NaOH concentration, temperature and acrylamide addition rate were considered to be important factors. An initial reactivity and degree of substitution(DS) in carbamoylethylation of cellulosic fibers were effective according to increasing the addition rates of alkali, acrylamide and the temperature condition of $40^{\circ}C$. The effective wet strength properties by N-chlorocarbamoylethylation of cellulosic fibers were indicated under the conditions of DS 0.06. The wet strength of sheet was improved to 85% at the 100% basis of dry strength. From the photograph of scanning electron microscopy, fiber cuttings on the edge of sheet sample used in tensile strength testing were found in the N-chlorocarbamoylethylated sheet, due to the improvement of fiber bonding strength. The hypochlorite treatment was effective in the recycling of N-chlorocarbamoylethylated sheet, and was reduced the wet strength of sheet to be able to reslush.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.206-206
• /
• 2003

피클(pickles)은 구미 각국에서 널리 애용되는 침채류이다. 수확한 농산물의 신선도를 유지하면서 장기보관 하기 위해 만들어진 것으로 여러 가지 방법이 시도되어 왔고, 동양에서는 높은 습도로 인한 곰팡이 증식을 억제하기 위하여 소금 절임 방법이 발달되었으며, 건조한 기후의 유럽에서는 세균번식을 억제하기 위하여 식초절임이 발달하였다. 피클이란 채소 또는 과실류를 소금, 식초 또는 여기에 향신료 등을 넣은 것에 절인 것을 총칭하는 것으로, 주로 오이, 컬리플라워, 양파, 미숙 토마토 등을 원료로 사용한다. 본 연구에서는 피클의 특징인 아삭아삭함을 유지하면서, 피클의 신맛과 한국 전통식장아찌를 혼용한 염장피클로, 기능적 특성을 가진 허브를 첨가하여 현대인에게 오는 성인병의 예방과 기능성 식품에 부가 가치를 높이고자 하며, 또한 피클 제조를 위한 고추의 품종 선정을 위한 기초 실험을 하고자 함에 있다. 풋고추, 청양고추, 꽈리고추 등 품종을 달리하여 제조한 고추피클의 숙성기간 중 품질특성을 실험하였다. 염도변화는 모든 품종에서 숙성기간이 길어질수록 염도가 낮아졌으며, 숙성이 완료되는 시점인 25일경에는 풋고추 2.95%, 청양고추 2.68%의 염도 변화를 보였다. pH변화는 세 품종간에 차이는 없는 것으로 보여졌으며, 숙성기간에 따른 차이도 거의 없는 것으로 나타났다. 고형분함량은 풋고추와 꽈리고추가 비슷한 경향을 보였고, 청양고추가 다소 높았다. 적정산도의 변화는 세 품종간에 차이는 없었지만, 숙성이 진행될수록 증가하는 경향을 보였다. 탁도변화는 꽈리고추가 가장 낮았고, 청양고추가 가장 높았으며, 숙성이 진행될수록 모두 탁해지는 경향을 보였다. 또한 피클의 경도변화는 풋고추는 0일에 45.12g 청양고추는 56.68g, 꽈리 고추 42.12g의 경도를 보였으며, 숙성최종단계인 25일에는 풋고추 20.33g, 청양고추 25.12g, 꽈리고추는 17.81g으로 꽈리고추의 경도가 가장 낮았고, 청양고추는 세 품종 중에서 가장 높은 것으로 나타났으며, 세 품종 모두 숙성이 진행될수록 경도가 현저히 낮아지는 것으로 나타났다.