• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2484-2490
• /
• 2012

This study reports on the development and performance verification of cell simulation boards of simulator and the embedded program for board control of the battery management system (BMS) of electric vehicle (EV) cars, which manages the next-generation automotive lithium-ion battery pack. Here, we have improved the speed of the simulator by using operational (OP) amplifier and transistors that were connected in series. In addition, using a digital analog converter (DAC) in each channel, we have improved the performance by channel-to-channel isolation (isolation) as compared to the traditional methods. Furthermore, by constructing a current-limiting protection circuit, one can be protected from disturbance and, by utilizing a precision shunt resistor for the current sensor, we have increased the precision of the current control. In order to verify the performance of the developed simulator, we have performed the experiment 10 times, with values ranging from 0.5 V to 5 V, and a voltage drop step of 0.5 V. Significance analysis of experimental data, and repeatability tests were performed, showing an average standard deviation of 0.001~0.004 V, indicating high repeatability and high statistical significance of the current method and system.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.57-67
• /
• 2007

Researchers in mobile AR systems have so far put the value on the technical challenges involved in the limitations imposed from mobility. Beyond such immediate technical questions, however, are questions regarding the possible contents that are to be used for the user’s interaction in ubiquitous computing environment. Various aspects of context of user and environment can be utilized easily as well as effectively. Moreover, the environment will be equipped with lots of pervasive but invisible computing resources. However, it is difficult for users to have access to those computing resources. At the same time, as the smart appliances get to have more features, their user interfaces tend to become harder to use. Thus, in this paper, we propose Context-Aware Mobile Augmented Reality (CAMAR) system. In our system, users only need to take a picture of smart appliances with a built-in camera in a mobile device when they intend to control the appliances. It lets users interact with the smart appliances through personalized control interfaces on their mobile devices. Also, it supports enabling contents to be not only personalized but also shared selectively and interactively among user communities.

• Fire Science and Engineering
• /
• v.20 no.3 s.63
• /
• pp.1-8
• /
• 2006

The purpose of this work is to analyze quantitatively if the safety instrumented system(SIS) like the pressure safety valves(PSV) in the processes of ethyl benzene plant have been designed relevantly to the safety integrity level because overpressure in the benzene or ethyl benzene columns causes the explosive reactions, fires and reactor explosions. The safety integrity level(SIL) 3 has been adopted as a target level of SIS based on the general data of the Probability of Failure on Demand of PSV, $1.00E-4{\sim}1.00E-3$. The standard model of the reliability has been set up and then the fault tree analysis of it has been carried out to get the PFD of SIS, and the results show 8.97E-04, 5.37E-04, 5.37E-04 for benzene prefractionator column, benzene column and EB column, respectively. Thus, we conclude that the SIS is designed to fulfill the condition of SIL3, and when the partial stroke test for the control valve are carried out every sixth month, the SIS of each column is expected to increase its reliability up to $22{\sim}27%$.

• Economic and Environmental Geology
• /
• v.53 no.3
• /
• pp.321-336
• /
• 2020

The Headquarters for Earthquake Research Promotion (HERP) represents the upper-most level of Japan's earthquake disaster prevention governance. Its policy committee establishes the national earthquake investigation research promotion plan. The earthquake investigation committee of HERP collects survey geo-data and evaluates the research results of each earthquake disaster prevention agency. The establishment of an earthquake-related geo-resilience research strategy is both necessary and desirable for Korea. The concept of geo-resilience entails the ability to improve disaster resilience through the application of research results and the convergence of geoscience with science and technology (S&T) including the humanities and social sciences. The achievement of geo-resilience requires a national long-term roadmap and strategy for earthquake prediction research, the development of earthquake disaster prediction and prevention technology, Geo-ICT convergence technology development, implementation of a geocyber physics system (Geo-CPS), the use of geo-mimetics, and geoscientific R&D as it relates to local communities. Through such efforts, the national research institutes of Korea will be able to develop earthquake prediction capacities in relevant fields, reinforce proactive response capabilities, enhance community-level confidence in geodata and its research results, foster next-generation geoscientific manpower, and expand geoscientific infrastructure.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.10
• /
• pp.962-974
• /
• 2010

Recently, the convergence of information technology with bio-technology, nano-technology or other technologies has been creating a new paradigm. In a field of transportation, the intelligent transport systems which is a convergence of intelligent technologies and transportation systems have been studied. The Variable Speed Limit(VSL), is one of ITS technologies, is thought to improve safety and efficiency of transportation while controlling speed limit based on road conditions. Legacy studies have considered only one station for VSL algorithm. However, it is not appropriate for an urban freeway installed with many stations. In this paper, new algorithm is proposed to not only enhance effectiveness of VSL based on cooperation of stations but also reflect road conditions within 30 seconds. The proposed algorithm consists of 4 steps: the first is a "searching bottleneck station" step, the second is a "calculating a size of congestion" step, the third is a "calculating the number of controlled stations" step, the final is a "calculating VSL" step. This algorithm guarantees improved safety and minimum additional travel time. The travel time should be considered because drivers would against the VSL algorithm when the proposed algorithm occurs additional travel time. In our experiments, microscopic traffic simulator VISSIM is selected to perform a modeling work. The results show that proposed algorithm provides the improved safety and minimum increase of travel time.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.363-369
• /
• 2021

In this paper, We propose variable cut-off frequency and variable sample rate small-area multi-channel digital filter for telemetry system. Proposed digital filter reduced hardware area by implementing filter banks that can variably use cut-off frequency and sample rate without additional filter banks for an arbitrary cut ratio. In addition, We propose the architecture in which sample rate can variably be selected according to the number of filters that pass through the multiplexer control. By using time division multiplexing (TDM) supported by the finite impulse response (FIR) intellectual property (IP) of Quartus, the proposed digital filter can greatly reduce digital signal processing (DSP) blocks from 80 to 1 compared without TDM. Proposed digital filter calculated order and coefficients using Kaiser window function in Matlab, and implemented using very high speed integrated circuits hardware descryption language (VHDL). After applying to the telemetry system, we confirmed that the proposed digital filter was operating through the experimental results in the test environment.

• The Journal of Society for e-Business Studies
• /
• v.20 no.4
• /
• pp.103-126
• /
• 2015

Compared to other countries, cloud computing in Korea is not popular especially in the government sector. One of the reasons for the current not-fully-blossomed situation is partly by early investment in huge government datacenters under Korea's e-government initiative; let alone, there was no strong control tower as well as no enforcing law and ordinances for driving such cloud computing initiative. However, in 2015 March 'Cloud Computing and Privacy Security Act' (hereinafter, Cloud Act) had been passed in the Parliament and from September 2015 Cloud Act was deployed in Korea. In U.S., FedRAMP (Federal Risk Assessment and Management Program) along with Obama Adminstration's 'Cloud First' strategy for U.S. federal institutions is the key momentum for federal cloud computing adoption. In 2015 January, U.S. Congressional Research Service (CRS) has published an extensive monitoring report for cloud computing in U.S. federal institutions. The CRS report which monitored U.S. government cloud computing implementation is indeed a good guideline for Korean government cloud computing services. For this reason, the purpose of the study is to (1) identify important aspects of the enacted Korean Cloud Act, (2) describe recent U.S. federal government cloud computing status, (3) suggest strategy and key strategy factors for facilitating cloud adoption in public organizations reflecting SDLC strategy, wherein.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.40-48
• /
• 2013

This paper presents multi-channel transimpedance amplifier(TIA) arrays in short-range LADAR systems for unmanned vehicles, by using a 0.18um CMOS technology. Two $4{\times}4$ channel TIA arrays including a voltage-mode INV-TIA and a current-mode CG-TIA are introduced. First, the INV-TIA consists of a inverter stage with a feedback resistor and a CML output buffer with virtual ground so as to achieve low noise, low power, easy current control for gain and impedance. Second, the CG-TIA utilizes a bias from on-chip bandgap reference and exploits a source-follower for high-frequency peaking, yielding 1.26 times smaller chip area per channel than INV-TIA. Post-layout simulations demonstrate that the INV-TIA achieves 57.5-dB${\Omega}$ transimpedance gain, 340-MHz bandwidth, 3.7-pA/sqrt(Hz) average noise current spectral density, and 2.84mW power dissipation, whereas the CG-TIA obtains 54.5-dB${\Omega}$ transimpedance gain, 360-MHz bandwidth, 9.17-pA/sqrt(Hz) average noise current spectral density, and 4.24mW power dissipation. Yet, the pulse simulations reveal that the CG-TIA array shows better output pulses in the range of 200-500-Mb/s operations.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.961-970
• /
• 2009

Over the last decade, interactive devices such as mobile phones have become complicated drastically mainly because of feature creep, the tendency for the number of features in a product to rise with each release of the product. One of the ways to reduce the complexity of a multi-functional device is to design it consistently. Although the definition of consistency is elusive and it is sometimes beneficial to be inconsistent, in general, consistently designed systems are easier to learn, easier to remember, and causing less errors. In practice, however, it is often not easy to design the user interaction or interface of a multi-functional device consistently. Since the interaction design of a multi-functional device should deal with a large number of design variables and relations among them, solving this problem might be very time-consuming and error-prone. Therefore, there is a strong need for a well-developed methodology that supports the complex design process. This study has developed an effective and efficient methodology, called CUID (Consistent Design of User Interaction), which focuses on logical consistency rather than physical or visual consistency. CUID deals with three main problems in interaction design: procedure design for each task, decisions of available operations(or functions) for each system state, and the mapping of available operations(functions) and interface controls. It includes a process for interaction design and a software tool for supporting the process. This paper also demonstrates how CUID supports the consistent design of user interaction by presenting a case study. It shows that the logical inconsistencies of a multi-functional device can be resolved by using the CUID methodology.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.23-30
• /
• 2005

This paper describes a DLL(delay locked loop)-based multi-clock generator having the lower active stand-by power as well as a fast relocking after re-activating the DLL. for low power and high speed VLSI chip. It enables a frequency multiplication using frequency multiplier scheme and produces output clocks with 50:50 duty-ratio regardless of the duty-ratio of system clock. Also, digital control scheme using DAC enables a fast relocking operation after exiting a standby-mode of the clock system which was obtained by storing analog locking information as digital codes in a register block. Also, for a clock multiplication, it has a feed-forward duty correction scheme using multiphase and phase mixing corrects a duty-error of system clock without requiring additional time. In this paper, the proposed DLL-based multi-clock generator can provides a synchronous clock to an external clock for I/O data communications and multiple clocks of slow and high speed operations for various IPs. The proposed DLL-based multi-clock generator was designed by the area of $1796{\mu}m\times654{\mu}m$ using $0.35-{\mu}m$ CMOS process and has $75MHz\~550MHz$ lock-range and maximum multiplication frequency of 800 MHz below 20psec static skew at 2.3v supply voltage.