• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.240-243
• /
• 2013

This study was conducted to develop the log cultivation techniques of the maitake Grifola frondosa. We used two kinds of Grifola frondosa strains for this study. Fully incubated logs were buried into soil directly and were buried with soil inside of container box in 70% shaded vinyl house. In the vinyl house Yipsaeilho cultivar buried by the soil was delayed about 15days in harvest date compared with Dabak cultivar. Color of fruit body of Yipsaeilho cultivar was dark brown and that of Dabak cultivar was grayish brown. Yields of Yipsaeilho cultivar was 15-16 $kg/m^2$, more than that of Dabak cultivar, 11-13 $kg/m^2$. In the container box, Yipsaeilho cultivar buried by the soil was also delayed about 5days in harvest date compared with Dabak cultivar. Color of fruit body was similar to the result of vinyl house soil reclamation. But yields difference was not shown between two cultivars, 1.2-1.4 kg/box.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.53-53
• /
• 2017

연구목적: 국내 과일 산업의 한 단계 도약과 대외 경쟁력을 높이기 위해서는 수확작업의 기계화가 시급함. 이 연구는 국내외 과일 수확 기계화 현황과 문제점을 분석하고, 향후 수확작업 기계화 방향을 제시하고자 수행 수확기계 실용화 현황 및 고찰 (국내) 과일을 직접 수확이 아닌 수확 작업을 보조해주는 고지 작업기(수동형, 모터 진동형)와 고소 작업차가 대부분임. 수동형은 사과 감 등을 수확하지만, 작업능률이 낮고 작업자가 쉽게 피로하여 장시간 작업이 불가능하므로 실질적인 대안이 되지 못함. 진동형은 자체 동력을 이용하여 나무에 진동을 가하여 주로 대추 매실 등 소과류 수확에 이용되고, 수확능률은 우수하나 충격 손상이 많아 개선이 요구됨. 고소작업차는 동력원에 따라 충전식과 엔진식으로 구분되고, 충전식은 엔진식에 비해 진동 소음이 적어 쾌적하지만, 작업시간이 배터리 용량에 제한을 받음. 또한 작업대 작동방식에 따라 리프트형과 붐형으로 구분함. 리프트형은 리프트를 이용하여 작업대를 상하로 구동하는 방식으로 높은 위치의 과실 수확이 어렵고, 작업대 넓이 만큼의 작업 공간(과수간의 거리)이 필요함. 붐형은 필요한 곳으로 접근성이 우수하나 무거운 무게를 지탱하기 어렵기 때문에 본체를 무겁게 하거나 수시로 수확된 과일을 하차시켜야 함. (국외) 수확 후 가공되는 과일류와 포도 올리브 오렌지 매실 등 소과류 수확이 기계화되었지만, 사과 복숭아 등 신선과일은 아직도 외국의 값싼 노동자들에 의존하여 수확되고 있음. 현재 실용화된 수확 기계는 진동식 수확기계와 터널식 수확기계가 대표적임. 진동식은 집게형의 부착기를 나무 줄기에 고정한 후 트랙터 동력원으로 나무에 진동을 가하여 수확하고, 올리브 대추 등과 같은 소과류와 과피가 두꺼운 오렌지 등에 적용되고, 수확 작업능률이 매우 높으나 과일의 낙하 상처를 피할 수 없는 단점이 있음. 터널형은 규격화(과수 크기 및 형태, 재식거리)된 과수원에 잘 적응하도록 설계 제작되어, 과수 위를 지나가면서 내부에 설치된 진동장치와 컨테이너로 과일을 수확하고, 와인용 포도 수확기가 대표적임. 기계수확이 가능하도록 과수원 조성단계에서부터 재배양식(과수 좌우 및 전후 거리)을 기계의 제원(바퀴 간격, 작업부 간격 등)에 맞추어 재배함. 과일 수확로봇에 관한 연구는 활발하고 일부에서 실증시험단계에 있음. 결론: 구체적인 추진방향을 제시하면, 단기적으로는 과일 수확작업자의 작업편이성과 노동강도를 줄일 수 있도록 소형 저가 범용성이 우수한 보조기구/기계의 보급을 확대하고, 중장기적으로는 수확기계/수확로봇 개발을 위한 연구개발비 투자를 늘리는 동시에, 기계/로봇이 과수원에 잘 적응할 수 있도록 수형 재식거리 등 재배양식의 표준화가 추진되어야 함.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.780-790
• /
• 2015

Studies for a plants factory is progressing for cultivating various plants by the needs of the times and industry around world. However most studies is carried out only in lab sized plants factory. It does not consider an economic feasibility. The study for a large scale plants factory is very required to get an economic gain. In this paper we has been studying a smart farm factory based on ICT using the hydroponics ginseng. The smart farm factory is to extend a concept of the general plants factory to full automated factory. The factory can collect the information about growing of plants and automate operating and management of factory like the existing plants factory. Also it is the total plants factory management system, which analyzes the collected information for optimized growth and development of plants and applies the result to the system back.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.5
• /
• pp.92-100
• /
• 2001

This study was conducted to evaluate the growth rate of landscape trees produced in containers for three year, and the growth rate of the establishment period during sixth month~twelve months after transplanting. Two types of container such as plastic pot(pot) and fabric growing bag(bag) were adopted to restrict tree roots. Each type of container was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plant species (Magnolia denudata, Albizzia julibrissin) were planted in the seven sub-types of container. After one or two growing season in the container, the trees of each container type were transplanted. Half of the trees were transplanted in the mild spring season, and the other half were transplanted in the improper summer season. The data was collected on the diameter of root cellar and the tree height in each year. The research results are as follows; 1. Container production method was lower than the traditional production methods by 1.3 times ~ 2 times in the growth rates. 2. The Geocell bag and Root control bag revealed higher growth rates than pp-woven bag. And pot- in-pot(double pot)system revealed higher growth rates than the ether container pot system in A denudata. There were no differences in the growth rates between container production system in Albizzia julibrissin. 3, The growth rates of improper transplanting trees was high in the \"pot\" type - \"bag\" type - \"control\" in descending order. Especially, the growth rates of \"pot\" type revealed higher than \"control\" by 4 times. 4. From the results of ANOVA and Ad hoc test, the variable of growth factors of each container types in improper transplanting experiment was not significant for a range of 5% or 1% level. And the growth rates of traditional production method was lower than the container production method. 5. There was no differences in growth rate between the containerized and the traditional production system in the case of proper transplanting experiment. The growth rates of diameter of root collar was higher in the \"control\". The growth rates of tree height was higher in the \"bag\" type. Finally, based upon the results of this study, subsequent research on the development of container materials and maintaining methods that focused on the growth rates would be required.aintaining methods that focused on the growth rates would be required.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.2
• /
• pp.122-133
• /
• 2021

Cultivar parameter calibration can be affected by the reliability of the input data to a crop growth model. In South Korea, two sets of weather stations, which are included in the automated synoptic observing system (ASOS) or the automatic weather system (AWS), are available for preparation of the weather input data. The objectives of this study were to estimate the cultivar parameter using those sets of weather data and to compare the uncertainty of these parameters. The cultivar parameters of CERES-Rice model for Shindongjin cultivar was calibrated using the weather data measured at the weather stations included in either ASO S or AWS. The observation data of crop growth and management at the experiment farms were retrieved from the report of new cultivar development and research published by Rural Development Administration. The weather stations were chosen to be the nearest neighbor to the experiment farms where crop data were collected. The Generalized Likelihood Uncertainty Estimation (GLUE) method was used to calibrate the cultivar parameters for 100 times, which resulted in the distribution of parameter values. O n average, the errors of the heading date decreased by one day when the weather input data were obtained from the weather stations included in AWS compared with ASO S. In particular, reduction of the estimation error was observed even when the distance between the experiment farm and the ASOS stations was about 15 km. These results suggest that the use of the AWS stations would improve the reliability and applicability of the crop growth models for decision support as well as parameter calibration.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.258-262
• /
• 2022

Pleurotus species are the most consumed and cultivated mushrooms in Korea. Although oyster mushrooms (P. ostreatus) can be cultivated automatically, their storability is slightly lower than that of king oyster mushrooms (P. eryngii) and winter mushrooms (Flammulina velutipes); therefore, the export proportion of oyster mushrooms is very low. Since Korean mushrooms are highly preferred across Southeast Asian, the export of oyster mushrooms in the form of complete substrates is expected to be more promising than that of fresh mushroom. Here, 1 and 2.5 kg complete substrates of P. ostreatus 'Soltari' and P. sajor-caju 'Sambok' were prepared and stored at different temperature from 0 to 15℃ for 10 days. Thereafter, the formation of fruiting bodies was induced. Since the 2.5 kg complete substrates required 70 days of incubation, their mycelia were at an advanced age and their fruiting bodies did not grown normally. When 70%-incubated complete substrates were stored at 5-10℃, the growth was faster and more uniform and stable fruiting bodies were formed. Export test of complete substrates to Vietnam using distribution containers set at 0℃ and 15℃ revealed that the growth period was shortened by 1-2 days when the distribution containers were set at 15℃ and the yield of 'Soltari' increased by approximately 10%. In addition, even though the yield of 'Sambok' was similar between treatments at 0℃ and 15℃, the quality of fruiting bodies from 15℃-distributed complete substrates was much better than that of those from 0℃-distributed substrates.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.28-34
• /
• 2022

This study was conducted to determine the changes in ginsenosides content according to additional UV-A, and UV-B LED irradiation before harvesting the ginseng sprouts. One-year-old ginseng seedlings (n=100) were transplanted in a tray containing a ginseng medium. The ginseng sprouts were grown for 37 days at a temperature of 20℃ (24h), a humidity of 70%, and an average light intensity of 80 µmol·m^-2·s^-1 (photoperiod; 24h) in a container-type plant factory. Ginseng sprouts were then transferred to a custom chamber equipped with UV-A (370 nm; 12.90 W·m^-2) and UV-B (300 nm; 0.31 W·m^-2) LEDs and treated for 3 days. Growth parameters and ginsenoside contents in shoot and root were conducted by harvesting on days 0 (control), 1, 2, and 3 of UV treatments, respectively. The growth parameters showed non-significant differences between the control and the UV treatments (wavelengths or the number of days). Ginsenoside contents of the shoot was highly improved by 186% in UV-A treatment compared to the control in 3 days of the treatment time. The ginsenoside contents of the roots was more improved in UV-A 1-day treatment and UV-B 3-day treatment, compared to the control by 171% and 160%, respectively. As a result of this experiment, it is thought that UV LED irradiation before harvesting can produce sprout ginseng with high ginsenoside contents in a plant factory.