• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.34.2-34.2
• /
• 2010

Cu(In,Ga)Se2 (CIGS) 화합물 반도체를 기반으로 한 태양전지는 박막태양전지 기술 중 세계최고효율을 기록하고 있다. CIGS를 합성하는 방법은 동시증발법, 스퍼터링/셀렌화 등의 진공방식과 나노분말법, 전착법, 용액법 등의 비진공방식이 있으나, 현재까지 진공방식이 양산기술로서 완성도가 높은 것으로 알려져 있다. 특히 스퍼터링에 의한 전구체 박막 증착과 셀렌 분위기에서의 열처리 공정을 결합시킨 2단계 공정은 동시증발법에 비해 대면적 모듈 제조에 유리한 것으로 알려져 있다. 셀렌화 공정은 통상 반응성이 매우 높은 H2Se 기체를 이용하고 있으나, 부식성 및 안전성 문제를 해결하기 위해 추가적인 설비가 요구되므로 제조비용을 높이는 단점을 갖는다. 한편, Se 증기를 이용하면 안전성은 담보되나 낮은 반응성으로 인해 고온에서 장시간 열처리를 해야하는 문제를 안고 있다. 본 연구에서는 새로운 Se 증기를 사용하되 반응효율을 높일 수 있는 새로운 셀렌화 열처리방법을 제시하고자 한다. 기존의 Se 증기가 별도의 증발원을 이용하여 공급된 것과는 달리, 금속전구체 직상부에 Se이 코팅된 별도의 커버글라스를 위치시켜 Se의 손실을 최대한 억제하였다. Se 커버글라스가 밀착된 금속프리커서를 $200{\sim}600^{\circ}C$ 온도범위에서 열저항가열로 내부에서 열처리하였으며, 추가로 Se을 공급하지는 않았다. 이와 같은 방법 제조된 CIGS 박막의 물성을 X선회절법, 주사전자현미경 등으로 관찰하였으며, 예비실험결과 비교적 낮은 온도에서 chalcopyrite 상이 형성됨을 확인하였다. 근접셀렌화에 의해 제조된 CIGS 박막이 적용된 태양전지를 제조하여 셀렌화 공정변수에 따른 소자특성변화를 제시하고자 한다.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.171-178
• /
• 2006

Most approaches for extracting hypernyms of a noun from its definitions in an MRD rely on lexical patterns compiled by human experts. Not only these approaches require high cost for compiling lexical patterns but also it is very difficult for human experts to compile a set of lexical patterns with a broad-coverage because in natural languages there are various expressions which represent same concept. To alleviate these problems, this paper proposes a new method for extracting hypernyms of a noun from its definitions in an MRD. In proposed approach, we use only syntactic (part-of-speech) patterns instead of lexical patterns in identifying hypernyms to reduce the number of patterns with keeping their coverage broad. Our experiment has shown that the classification accuracy of the proposed method is 92.37% which is significantly much better than that of previous approaches.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.808-816
• /
• 2010

Spectrum sharing between wireless systems becomes a critical issue due to emerging new technologies and spectrum shortage. Since WRC-07 allocated 3400-3600MHz band for the coming fourth generation (4G) or IMT-Advanced on a co-primary basis along with existing Fixed Wireless Access (FWA), it requires spectrum sharing studies to solve the interference problems between two systems. In this paper, I propose the separation distance between service coverages as a sharing fundamental criterion based on the interference to noise power ratio (I/N) received in a FWA base station from several IMT-Advanced base stations on the cellular systems. Especially, some results imply that I/N values compared to the worst case can be greatly reduced with MIMO SDMA interference mitigation technique of IMT-Advanced base stations so that these two systems can co-exist in the same frequency with appropriate separation distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.778-786
• /
• 2012

Sensors that are used on wireless sensor networks can be divided into two types: directional sensors, such as PIR, image, and electromagnetic sensors; and non-directional sensors, such as seismic, acoustic and magnetic sensors. In order to guarantee the line-of-sight of a directional sensor, the installation location of the sensor must be higher than ground level. Among non-directional sensors, seismic sensors should be installed on the ground in order to ensure the maximal performance. As a result, seismic sensors may have network connectivity problems due to communication failure. In this paper, we propose a 3D node deployment method to maximize the coverage and the network connectivity considering the sensor-specific properties. The proposed method is for non-directional sensors to be placed on the ground, while the directional sensor is installed above the ground, using trees or poles, to maximize the coverage. As a result, through the topology that the detection data from non-directional sensors are transmitted to the directional sensor, we can maximize the network connectivity. Simulation results show that our strategy improves sensor coverage and network connectivity.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.8
• /
• pp.535-542
• /
• 2013

Since case-based reasoning(CBR) has many advantages, it has been used for supporting decision making in various areas including medical checkup, production planning, customer classification, and so on. However, there are several factors to be set by heuristics when designing effective CBR systems. Among these factors, this study addresses the issue of selecting appropriate neighbors in case retrieval step. As the criterion for selecting appropriate neighbors, conventional studies have used the preset number of neighbors to combine(i.e. k of k-nearest neighbor), or the relative portion of the maximum similarity. However, this study proposes to use the absolute similarity threshold varying from 0 to 1, as the criterion for selecting appropriate neighbors to combine. In this case, too small similarity threshold value may make the model rarely produce the solution. To avoid this, we propose to adopt the coverage, which implies the ratio of the cases in which solutions are produced over the total number of the training cases, and to set it as the constraint when optimizing the similarity threshold. To validate the usefulness of the proposed model, we applied it to a real-world target marketing case of an online shopping mall in Korea. As a result, we found that the proposed model might significantly improve the performance of CBR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4460-4467
• /
• 2010

Recent advances in computer technology have brought more dependence on software to railway systems and changed to computer systems. Hence, the reliability and safety assurance of the vital software running on the embedded railway system is going to tend toward very critical task. Accordingly, various software test and validation activities are highly recommended in the international standards related railway software. In this paper, we presented an automated analysis tool and standard for software testing coverage in railway system, and presented its result of implementation. We developed the control flow analysis tool estimating test coverage as an important quantitative item for software safety verification in railway software. Also, we proposed judgement standards due to railway S/W Safety Integrity Level(SWSIL) based on analysis of standards in any other field for utilizing developed tool widely at real railway industrial sites. This tool has more advantage of effective measuring various test coverages than other countries, so we can expect railway S/W development and testing technology of real railway industrial sites in Korea.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.6
• /
• pp.683-690
• /
• 2006

Reducing power consumption to extend network lifetime is one of the most important challenges in designing wireless sensor networks. One promising approach to conserving system energy is to keep only a minimal number of sensors active and put others into low-powered sleep mode, while the active sensors can maintain a connected covet set for the target area. The problem of computing such minimum working sensor set is NP-hard. In this paper, a centralized Voronoi tessellation (CVT) based approximate algorithm is proposed to construct the near optimal cover set. When sensor's communication radius is at least twice of its sensing radius, the covet set is connected at the same time; In case of sensor's communication radius is smaller than twice of its sensing radius, a connection scheme is proposed to calculate the assistant nodes needed for constructing the connectivity of the cover set. Finally, the performance of the proposed algorithm is evaluated through theoretical analysis and extensive numerical experiments. Experimental results show that the proposed algorithm outperforms the greedy algorithm in terms of the runtime and the size of the constructed connected cover set.

• Annual Conference on Human and Language Technology
• /
• 2017.10a
• /
• pp.197-200
• /
• 2017

채팅 모델은 인간과 컴퓨터가 신변잡기 대화를 나눌 수 있게 해주는 시스템으로 빠른 속도로 발전하는 인공지능 음성언어 비서 시스템에 필수적으로 사용되는 기술이다. 본 논문에서는 검색기반 채팅 모델에서 발생하는 검색 효율 문제와 정확하지 못한 답변을 출력하는 문제를 해결하기 위해 색인어 정규화와 응답 필터링이 적용된 검색기반 채팅 모델을 제안한다. 색인어 정규화를 통해 99.3%의 색인 커버리지를 확보하였으며 필터링 모델을 통해 기존 검색 모델에서보다 향상된 사용자 만족도를 얻었다.

• 한국어정보학회:학술대회논문집
• /
• 2017.10a
• /
• pp.197-200
• /
• 2017

채팅 모델은 인간과 컴퓨터가 신변잡기 대화를 나눌 수 있게 해주는 시스템으로 빠른 속도로 발전하는 인공지능 음성언어 비서 시스템에 필수적으로 사용되는 기술이다. 본 논문에서는 검색기반 채팅 모델에서 발생하는 검색 효율 문제와 정확하지 못한 답변을 출력하는 문제를 해결하기 위해 색인어 정규화와 응답 필터링이 적용된 검색기반 채팅 모델을 제안한다. 색인어 정규화를 통해 99.3%의 색인 커버리지를 확보하였으며 필터링 모델을 통해 기존 검색 모델에서보다 향상된 사용자 만족도를 얻었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.120-122
• /
• 2012

기존 소프트웨어 테스팅 기법은 개발자가 수동으로 테스트 케이스를 작성해야 하는 비효율성으로 인해 임베디드 소프트웨어의 안정성 확보에 어려움이 있다. Concolic 테스팅 기법은 자동으로 소프트웨어 테스트 케이스를 생성함으로써 기존 소프트웨어 테스팅 기법의 문제를 해결했지만, 임베디드 소프트웨어 테스트에 필수적인 bitwise 연산을 지원하지 않는 등의 문제가 있었다. 본 논문에서는 임베디드 소프트웨어를 위해 bitwise 연산을 지원하는 Concolic 테스팅 개선 방법에 대한 연구를 수행하고 오픈 소스 임베디드 소프트웨어 Busybox에 적용하여 기존 연구와 결과를 비교하였다. Busybox의 10개 유틸리티에 적용한 결과 기존 연구 결과 대비 평균 33%의 분기 커버리지 향상이 있었다.