• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.409-416
• /
• 2016

The contact force characteristic between the pantograph and the catenary wire represents the current collection quality of trains; it should be precisely controlled under international standard. Recently, a noise reduction cover has been installed around the pantograph of high speed trains. However, little study on the contact force by the pantograph cover has been conducted. In this study, the impact on the current collection performance of the pantograph cover was analyzed by dynamic contact force measurement using a next generation high speed train (HEMU-430X). As a result, it was confirmed that the attachment of a pantograph cover could lower the mean contact force by approximately 50N at 300km/h. In addition, the pure difference of the average contact force by the presence of pantograph cover, except for the static pressure, was measured and found to be up to 110N at 300km/h. It was also found that the standard deviation of the contact force of 3~5N could be changed by use of a pantograph cover.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.717-726
• /
• 2006

Traditional external post-tensioning method using either steel bars or tendons is commonly used as a retrofitting method for steel composite bridges. However, the method has some disadvantages such as stress concentration at anchorages and inefficient load-carrying capability of live loads. Multi-stepwise prestressing method using thermal expanded coverplate is a newly proposed prestressing method, which was originally developed for prestressing steel structures. A new retrofitting method for steel girder bridges founded on a simple concept of thermal expansion and contraction of cover plate, the method is a hybrid of and combines the advantages of external post-tensioning and thermal prestressing. In this paper, basic concepts of the method are presented and an illustrative experiment is introduced. From actual experimental data, the thermal prestressing effect was substantiated and the FEM approach for its analysis was verified. The retrofitting effects ofa single-span bridge were analyzed and the feasibility of the developed method was examined.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.783-792
• /
• 2006

This study investigates developments in a prestressing method using the thermal-expanded cover-plates that increases the load-carrying capacity of structures by installing it on upper or lower flanges in case that huge flexural stiffness according to the increase in span length or load are required of steel structure, such as rolled H-beam or built-up beam. This method applies multi-stepwise contraction forces generated by the contraction of cover plates as prestressing forces after joining the cover plate applied by multi-stepwise thermal expansion that was applied to induce prestressing to structures. To perform a theoretical investigation of the prestressing force applied to a structure due to the thermal expansion and induce a multi-stepwise prestressing method using multi-stepwise thermal distribution, this study proposes a theoretical heat transfer solution for the multi-stepwise thermal distribution of cover plates and analyzes the effect of a multi-stepwise prestressing method using the multi-stepwise thermal expansion.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.125-138
• /
• 2000

화장품의 개발에서 기계적인 측정결과 뿐만 아니라 소비자가 실제 사용할 때 느껴지는 감성적인 요인의 중요성이 높이 인식되어감에 따라, 관능적인 특성평가의 필요성이 대두되고 있다. 그런 관점에서 트원케익에 대한 사용성 테스트의 한 방법으로 기호형 관능평가를 시도하였고, 본 실험에서는 동일한 소비자(28 명)가 9개의 트윈케익을 일정한 시간에 비슷한 화장 조건하에서 사용하여 비교 평가하도록 하여, 평가의 재현성과 신뢰성을 꾀하였다. 평가는 트윈케익의 세부 관능적 특성에 대한 강도 조사와 선호도 조사 및 전체적인 만족도에 대한 것이었다. 수집된 테이터를 주성분분석에 의해 데이터를 분석하였고, 그 결과 크게 커버력 요인과 입자감 요인이라는 2 가지 요인으로 트원케익의 특성을 평가할 수 있음을 알았다. 일반적인 트윈케익의 분류 방법인 촉촉함과 매트함의 경우, 매트함에 있어서는 트원케익의 공통적 속성으로 제품간 차이를 느끼지 못하였고, 촉촉함에 있어서는 트원케익제품간 차이를 약간 느끼는 것으로 나타났다. 또한 트윈케익의 관능적 특성별 강도와 선호도의 상관관계를 분석하였고, 그 결과에 따른 트윈케익의 (+)매력품질과 (-)매력품질을 분석하였는데, 선호도가 높은 제품이 되려면 여러 가지 (+)매력품질을 고루 갖추고,(-)매력품질을 적게 가져야 할 것으로 사료된다. 본 실험의 평가자들이 대부분 25∼30 세인 점을 감안하면 이 연령 대에서 선호도가 높은 트윈케익 제품의 특성은 커버력이 있으면서 고운 입자감을 느낄 수 있으며, 너무 촉촉하지도 매트하지도 않은 중간 상태와 자연스러운 화장상태를 유지하는 것으로 나타났다.

• The Optical Journal
• /
• s.140
• /
• pp.46-46
• /
• 2012

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.197-200
• /
• 2004

Sensor and optical properties have become critical features in powder foundation. The flaky barium sulfate powder shows good smooth texture, adhesion and natural looking characteristics. However, it has limitations abilities in UV shielding, hiding and blooming effect. Thus we adopt TiO$_2$ that has excellent hiding power and blooming effect as well as UV shielding ability, but TiO$_2$ has still intrinsic problems in dispersion and texture. To overcome this disadvantages, the barium sulfate/TiO$_2$/dimethicone composite powder was prepared. The flaky barium sulfate powder was coated with TiO$_2$ in nanoscale and followed by coated with dimethicone. When this surface-modified powder was applied for make-up cosmetics, especially in powder foundation, the powder gave powder foundation more good characteristics than the original flaky barium sulfate, Ti02 powder, dimethicone in abovementioned optical and sensory properties. To characterize the distinctive features of this surface-modified powder, we measured its characteristics with UV in vitro tester, hiding powder test method, goniophotometer, consumer panel test and so on.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2008.10a
• /
• pp.1-4
• /
• 2008

본 연구는 유아용 시트 고정 장치 커버의 개폐 시 사용자가 느끼는 물리적 영향도와 감성적 영향도의 상관관계를 분석하여 주요설계인자와의 관계를 분석하고자 한다. 이를 위하여 커버의 형상이 각기 다른 차종을 선정, 주요설계인자에 대한 치수를 측정하고, 시험기를 이용하여 개폐 시 사용자에게 가해지는 물리적인 힘을 측정하였다. 또한, 감성평가 체크리스트를 통한 사용자의 감성평가도 실시하였으며, 감성평가의 기준은 힘평가(힘만 고려한 평가)와 감각평가(힘을 제외한 평가)로 분리하여 평가하였다. 정리하면 기계적으로 측정된 물리적 힘과 감성에 의한 힘평가의 결과값을 비교 분석하여 두 측정값의 상관관계를 분석하고자 하고, 또한 감성평가 중 힘평가와 감각평가 사이의 관계도를 분석하여 주요설계인자에 대해 어떠한 감성적 영향을 미치는 가를 알아보고자 한다. 최종적으로 유아용 시트 고정 장치의 최종 제품에 대해 감성을 고려한 설계인자를 제공하고자 한다.

• Journal of Conservation Science
• /
• v.31 no.3
• /
• pp.267-278
• /
• 2015

In this study, the elastomer cover, a new contact material, was developed to establish the customized ultrasonic measurement considering surface irregularities of stone cultural heritages. The cover exhibits high elastic force and wear resistance because it has tensile strength of 17MPa and elongation of 625%. In addition, as a result of comparative experiments for the seven types according to transducers and contact materials including the elastomer cover, rock surface irregularities significantly affect attenuation of ultrasonic velocity. The phenomenon was more noticeable in the chiseling finish and indirect transmission measurement rather than the dabbed finish and direct transmission measurement. However, the Type F using the exponential transducer and elastomer cover showed stable P-wave velocity and high amplitude regardless of the surface irregularities. This because the elastomer cover sufficiently sticks to surface irregularities and removes pores between a transducer and a rock specimen. Therefore, the Type F should be used for the ultrasonic measurement of stone cultural heritages with surface irregularities.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.247-258
• /
• 2008

In this study, static loading tests were performed on H-beam specimens to assess the static behavior of H-beam prestressed with multi-stepwise thermal prestressing method (TPSM). The amount of induced thermal prestress and connection type were differentiated among the 400-mm-high and 6,000-mm-long H-beam specimens to evaluate their effect on the behavior of the beams. From the experimental results, it between the H-beam and the cover-plate increased in yielding load by 13~18%, whereas stiffness increased by 27~34%. In case of specimens with both bolting and welding connection, yie lding load increased by 18~29% and stiffness increased by 43~51%. Multi-stepwise initial stress distribution was also observed from the prestressed specimens, verifying the effectiveness of the multi-stepwise TPSM. By application of the multi-stepwise TPSM, a significant increase in yielding load and stiffness can be achieved, hence increasing sectional and prestressing efficiencies.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.10 no.2
• /
• pp.37-44
• /
• 1992

Although scanners are much more expensive than other input devices expect for some low quality devices, raster scanner and vectorizing softwares have been used and will be used as a means for the data entry in GIS. In this study, the accuracy of raster data and vectorizing in data entry by scanning technology, the coverage generation are investigated. As a result, the deterioration of spatial resolution can be improved by using the histogram analysis and the line enhancement when we scan a map at a lower dpi. It is to be desired that a raster scanner dpi is selected 150 dpi or 200 dpi among five densities (75 dpi, 150, dpi, 200 dpi, 300 dpi, 400 dpi) in view of the storage of raster data and the RMSE of coverage generation. Also, it was very important role of the choice of trace parameters to trace raster data in the vectorizing procedure.