• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1570-1575
• /
• 2007

The cold-forging process analysed in this paper deals with the cam bolt of a nonaxisymmetric shape which mainly is used as a part in the steering system of a vehicle for the purpose of adjusting shock absorb. So both strength and endurance are very important for the cam bolt. In this study, cam bolt forging process is composed of four stage processes. For three forging stages, shape of workpiece will be eccentrical. And then bolt head and washer of eccentrical shape is created in last stage. 3D finite element analysis repeatedly has been performed with changing dimension of die to obtain adequate former multi forging process and die shape. Simulation results reviewed have influence on deciding design of die and forging process. As a result, Simulation results have provided a direction to improve the process.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.585-595
• /
• 2008

Process design of multi-stage forging for a bolt with nonaxisymmetric washer cam has been studied by using finite element method. For shape complexity of the bolt, it is impossible to manufacture in a single stage forging. To design multi-stage forging for the bolt the forging load and fiber flow of each step have been analyzed by using commercial finite element code DEFORM-3D. Simulated results have been compared with experimental ones. Multi-stage forging process has been designed with four stages. The workpiece should be eccentric shape until third forging stage. And then bolt head and washer of eccentrical shape is created in last stage. As a results, It was predicted that shape of product would be good and effective strain would be uniformly distributed in the product. Also, it was predicted whether defects would exist or not by reviewing the fiber flow.

• 한국가스학회지
• /
• 제26권3호
• /
• pp.54-59
• /
• 2022

이 논문은 LPG 자동차 엔진의 타이밍벨트, 캠샤프트포지션센서 및 점화코일에 대한 고장사례에 관련된 연구이다. 첫 번째 사례는, 엔진의 프론트 케이스 브래킷장착을 할 때 12mm 볼트를 조이면서 과대한 토크로 인해, 볼트가 체결부에서 분리되어 크랭크축의 스프로킷에 끼여 타이밍벨트와 스프로킷의 이사이에 벨트 간섭에 의해 벨트가 끊어진 것을 확인하였다. 두 번째 사례는, 실린더 헤드부에 설치되어 있는 캠샤프트 포지션 센서와 캠축 감지부의 간극이 너무 작아 센서의 펄스신호불량에 의한 컴퓨터의 인식불량으로 인해 엔진의 부조화현상이 발생된 것을 확인하였다. 세 번째 사례는, 2번 점화코일의 내부불량으로 인해 점화를 할 때 점화코일에서 불꽃이 누설되어 엔진의 부조화 현상이 발생된 것을 확인하였다. 따라서, 차량관리자는 이러한 현상이 발생되지 않도록 철저한 차량점검을 해야한다.