• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.629-631
• /
• 1999

본 논문에서는 의류 제품의 기획, 디자인 시제품 검토 등의 작업을 효과적으로 지원하는 의상 캐드 시스템의 창조 모델을 제안한다. 이 참조모델은 디자이너의 패션 일러스트 작업을 지원하는 스케치 시스템, 의상 캐드 전반에 걸쳐 사용되는 문양을 생성하는 문양 생성 시스템, 옷본 디자인 작업을 수행하는 옷본 편집 시스템, 그리고 시제품 검토를 위한 가시화 시스템으로 구성된다. 또한 본 문에서는 이러한 시스템들을 구현하기 위한 관련 이론들을 제시하고 시제품을 구현한다. 구현된 시스템들은 기존의 상용화된 캐드 시스템들보다 고급화된 디자인 환경을 제공함으로서 의상 디자인 작업을 효과적으로 지원한다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.88-96
• /
• 2017

Purpose: The purpose of this study is to assess the relationship between the time spent designing custom abutments and repeated learning using dental implant computer aided design (CAD) software. Materials and Methods: The design of customized abutments was performed four stages using the 3DS CAD software and the EXO CAD software, and measured repeatedly three times by each stage. Learning effect by repetition was presented with the learning curve, and the significance of the reduction in the total time and the time at each stage spent on designing was evaluated using the Friedman test and the Wilcoxon signed rank test. The difference in the design time between groups was analyzed using the repeated measure two-way ANOVA. Statistical analysis was performed using the SPSS statistics software (P < 0.05). Results: Repeated learning of the customized abutment design displayed a significant difference according to the number of repetition and the stage (P < 0.001). The difference in the time spent designing was found to be significant (P < 0.001), and that between the CAD software programs was also significant (P = 0.006). Conclusion: Repeated learning of CAD software shortened the time spent designing. While less design time on average was spent with the 3DS CAD than with the EXO CAD, the EXO CAD showed better results in terms of learning rate according to learning effect.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.11-19
• /
• 2019

Purpose: This study evaluated the usability of and satisfaction with two types of computer-aided design (CAD) software among users who had experience with dental implant CAD software and those who did not. Materials and Methods: Dental technicians (n = 20) who had previous experience with dental implant CAD Software and students from the College of Dentistry (n = 12) who had never designed implant custom abutments were asked to evaluate two types of CAD Software, Exocad and Deltanine. In addition, the participants were asked to fill out a structured questionnaire (Section 1: Entering basic information and retrieving files; Section 2: Setting conditions before abutment design; Section 3: Setting abutment design; and Section 4: Overall satisfaction). For the statistical analysis of the collected data, Mann-Whitney U test was used (${\alpha}=.05$). Results: The ease of design and satisfaction with the implant CAD Software, evaluated with respect to 21 statements divided into four Stages, were significantly higher for Exocad in both groups for Secion 1. For Sections 2 and 3, participants with experience evaluated Deltanine to be significantly better. For Section 4, both groups evaluated Exocad Software to be better. Conclusion: Overall, the Exocad Software was evaluated as having better usability and offering greater satisfaction. However, in terms of performance in the core of the design process, i.e. Sections 2 and 3, Deltanine was rated higher by the experienced users. Thus, if the user interface design parts are supplemented, Deltanine CAD Software could be put to a wider use in clinics.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1010-1019
• /
• 2006

CAD system is a very important technology in designing the products which we are using today. This CAD technology has been enlarging its area into 3D CAD systems with the development of computer graphics technologies. In particular, such advances have been realized in special area such as the CAD system for designing shoes. However, because it is difficult to design a 3D CAD system, most CAD developments except for major CAD software companies usually have employed the AutoCAD which realizes 3D concepts. Also, many shoes' designers have been skilled with 2D shoe CAD systems and then they can make high achievements. Therefore, we design a new shoe CAD system with advantages of 2D CAD system and 3D CAD system. We also implement the scheme to transfer the data between 2D CAD system and 3D CAD system and also grading technologies to get patterns of various shoes size from a basic shoe's design.

• Korean Architects
• /
• s.629
• /
• pp.16-19
• /
• 2021

외산 캐드가 대다수를 차지하는 국내 캐드 시장에서 고군분투하고 있는 국산 캐드 제품이 있다. 기술독립의 가치와 국내 기술의 세계 표준화를 목표로 삼고 있는 마이다스아이티의 MidasCAD(마이다스캐드)는 건축사를 위한 'ArchDesign(아키디자인)' 제품을 출시하고, 사용자와의 소통을 통해 제품을 보완하며 국내 시장을 공략하고 있다. 아울러 9월 중에는 '마이다스캐드 2022' 버전이 출시 예정이다. 지난 8월 24일, 김기봉 마이다스아이티 국내사업그룹장을 직접 만나 마이다스캐드의 개발 방향, 마케팅 전략과 목표 등에 관한 이야기를 들어보았다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.11a
• /
• pp.160-166
• /
• 2002

본 연구의 목적은 비디오/오디오 프로토콜 분석 방식을 이용해서 텍스타일 디자인 프로세스 중 모티브 개발 단계에서 디지털 나염(DTP : Digital Textile Printing) 전용 캐드(CAD)와 같은 디자인 저작도구를 설계할 때 어떤 요소에 중점을 두고 개발 할 것인지에 대한 향상된 지침을 마련하는데 있다. 텍스타일 디자인 프로세스에 대한 프로토콜 분석을 위해 선행 연구를 고찰하여 디자인 행동 범주의 틀을 하향식(top-down)방식으로 설정하고 실제 행동 프로토콜 (action protocol) 분석을 통해 상향식(bottom-up)방식으로 세부 디자인 행동을 도출하였다. 텍스타일 디자인은 선행연구의 건축디자인과는 다른 특징을 지니기 때문에 프로토콜 분석에서도 새로운 디자인 행동 범주(action category)가 필요하게 되었다. 이를 위하여 모델 휴먼 프로세서(Model Human Processor)이론을 근거로 디자인 행동을 모터 행동(motor action), 지각 행동(perceptual action), 인지 행동(cognitive action)의 세 가지 범주[4]로 나누었으며 텍스타일 디자인 프로세스에 적합한 코딩 스킴(coding scheme)을 개발하였다. 본 연구에서는 이 새로운 코딩 스킴을 토대로 디자인 저작도구에 대한 디자이너의 인지적 모형(Cognitive Model)을 개발하였다. 이렇게 개발된 디자이너의 인지적 모형은 디지털 나염을 기반으로 하는 모티브 개발 단계에서 스케치와 렌더링에 대한 디자인 저작 도구의 향상된 설계지침 뿐만 아니라 방향도 시사하였다.

• Fashion Information and Technology
• /
• v.4
• /
• pp.2-7
• /
• 2007

• Fashion Information and Technology
• /
• v.4
• /
• pp.25-33
• /
• 2007

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2002.04a
• /
• pp.111-115
• /
• 2002

CAD System, which has been actively applied since late 80's, has become one of the most important tools in architectural design and has taken the central position in practical design processes. However, it is widely known that AutoCAD, the market-leading general-use CAD System, resulted in hindering the standardization of CAD System. This has been causing problems in communication among designers and inefficiency in their uses. The standardization in CAD System becomes an urgent issue. The study attempts to build up fundamental principles in standardization of CAD System, and to suggest a combinational model of international and domestic standards.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.24 no.1
• /
• pp.25-38
• /
• 2015

Since its introduction to the dentistry, the CAD/CAM technology has been used over fifteen years. The application of CAD/CAM started from coping fabrication, expanded to the posterior full crown, and anterior restoration manufacture has also become widespread recently. While the development of machine was rapid, the advance of zirconia block was the fastest. Although some differences exist among individuals, the various natural tooth color can be expressed through the zirconia coloring itself without porcelain build up. And the texture characteristics can be reproduced just by CAD design. In this article, the development history of digital dentistry was summarized.