• Microbiology and Biotechnology Letters
• /
• v.35 no.4
• /
• pp.334-338
• /
• 2007

The disinfection effects of trichloroisocyanuric acid (TICA), calcium hypochlorite (CH), and Bromochlorodimethylhydantoin (BCDMH) on various bacteria in aqueous suspension were comparatively characterized at various concentrations and exposure times of each disinfectant. When various bacteria cells ($10^8\;CFU/ml$) including Escherichia coli, Pseudomonas aeroginosa, Enterococcus faecalis, Bacillus cereus, Legionella pneumophila, and Staphylococcus aureus were exposed with a solution containing 8 ppm each of TICA, a 99% of the initial cells were killed in 60 sec, 368 sec, 372 sec, 506 sec, 812 sec, and 909 sec, respectively. In addition, the minimum exposure time required to kill 99% of E. coli ($10^8\;CFU/ml$) with 8 ppm of each TICA, BCDMH and CH was measured at 60 sec, 114 sec, and 7,100 sec, respectively. These comparative studies demonstrate that disinfection efficacy is highly variable depending on microbial species as well as disinfectant type, concentration, and exposure time.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.417-424
• /
• 2014

Reactivity and rheological behavior of highly concentrated polymer bonded explosives (PBX) simulant was studied. As a binder, thermosetting hydroxyl terminated polybutadiene (HTPB) was used. By using bimodal $CaCO_3$ (size ratio 10:1) and sugar particles (size ratio 25:1) as fillers, maximum 75 v% filling was possible during melt mixing. The relative viscosities of bimodal suspension were much lower than those of unimodal one and showed minimum values at 0.25 of fine particle fraction. In curing experiment, as curing temperature increased, the time of initiation and completeness of curing reaction became shortened, the torque kept low, and the change of internal temperature decreased.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.369-374
• /
• 2005

In this work, the calcium alginate microcapsules containing lemon oil were prepared by emulsification-internal gelation and their potential use as aromatherapy was examined by the controlled release system. The lemon oil encapsulated in the alginate was successfully observed by Fourier transform (FT-IR) spectroscopy and differential scanning calorimeter (DSC) measurements. Analysis of the diameters and shapes of microcapsules was conducted by scanning electron microscopy (SEM). The mean diameters ranging from 4 to 7 um and encapsulation yield ranging from 50 to $85\%$ were obtained. The controlled release of the lemon oil at $37^{circ}$ was demonstrated by the infrared moisture determination (IMDB). It was found that the amount of released lemon oil decreased with increasing concentrations of alginate and $CaCl_2$ due to the higher the cross-linking density of the capsules prepared. The oil release from the capsule was measured as a function of physical force. We confirmed that the external factor could control the collapse of capsule wall and the release rate.

• Resources Recycling
• /
• v.3 no.3
• /
• pp.27-31
• /
• 1994

We tested the limestone sludge produced in Pohang Iron & Steel Co., Ltd. as a filler powder for the effective use of portland cement. Hydration process was investigated by measuring the hydration rate, the amounts of non-evaporable water and compressive strength of cement-limestone sludge paste prepared by mixing limes-tone sludge with cement. The results obtained in this study can be summarized as follows: 1. There is no significant difference between the cases of adding up to 10% limestone sludge and those of unmixed cement system. However the reaction rate increases in the 5% limestone sludge system(due to the effects of fine). 2. The compressive strength increases proportionally with increasing the measured amount of non-evaporable water, Adding 5% limestone sludge also increases the strength a little higher, and the compressive strength and calcium silicate hydrates. In the case of the mixed limestone sludge, $2\theta$=$11.7^{\circ}$ peak appears in the samples of 28 days hydration. This peak indicted the presence of calcium carboaluminate hydrate. Although limestone sludge is generally regarded as a inert materials, some kinds of cement can produce a calcium carboaluminate by reacting with aluminate in cement pastes.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.266-273
• /
• 2011

Foamed glass was fabricated by using glass powder and foaming agents. For the glass powder, we used sodalime glass which's manufactured by using refused coal ore obtained as by-product from Dogye coal mine in Samcheok. And for the foaming agents, we used Calcium carbonate, Calcium phosphate and powder of shale type refused coal ore itself which has high content of carbon materials. We additionally used liquid binder for forming, and mixed together. And we formed rectangular shape and treated $800^{\circ}C$ for 20 min in an electrical furnace. The various kinds of foam glass samples were fabricated according to the kinds of foaming agents. The physical properties of samples, as specific gravity and compressive strength, were measured. Pore structure of each samples were investigated too. Foam glass with specific gravity of 0.4~0.7 and compressive strength of 30~72 kg/$cm^2$. Especially we get satisfying foam glass sample with low specific gravity of 0.47 and high compressive strength of 72 kg/$cm^2$ by the use of liquid calcium phosphate as foaming agent. It also had small and even shape of pore structure. Therefore, it is concluded that refused coal ore can be used for raw materials to manufacture secondary glass products such as a foamed glass panel for construction and industrial materials.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.113-123
• /
• 2005

In this study, calcium chloride$(CaCl_2)$, sodium chloride (NaCl), organic acids-containing deicer(NS 40, NS 100), mixed deicier$(NaCl\;70%+CaCl_2\;30%,\;NS\;40\;70%+CaCl_2\;30%,\;NaCl\;70%+NS\;40\;30%,\;NS\;40\;70%+NaCl\;30%)$ is investigated based on the laboratory test for deicing performance, freez-thaw resistance of concrete, and corrosion rate of metal. Test items for deicing performance were ice melting and ice penetration, freezing point depressions and eutectic point, pH, thermal properties for selected deicing chemicals as well as their compatibility with concrete and metal were experimentally investigated. As a test results, in case of the use chloride-containing deicier in area that concrete structures has subjected to freez-thaw reaction in winter season, it showed that mixed deicing chemicals with optimum ratio has desirable method than use one deicing chemicals when is consider to deicing performance and effects, corrosion of steel materials, and freez-thaw resistance of concrete. When use various deicing chemicals mixed, NS40(70%)+calcium chloride(30%) showed the best effective method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.204-213
• /
• 1986

The objective of this paper was to examine the response of rice seedling emergence and early growth under the different temperature (day/night, 29/21$^{\circ}C$, 17/17$^{\circ}C$, 12/12$^{\circ}C$) and the different seeding depth (1 cm, 2 cm, 3 cm). The trial was carried out in the phytotron and field in the Crop Experiment Station, Suwon, Korea in 1985. Calcium peroxide-coated seeds were very effctive in promoting seedling emergence, seedling establishment and eary growth of rice. Coated seeds were more effective in low temperature condition (17/17$^{\circ}C$, 12/12$^{\circ}C$) than in high temperature (29/21$^{\circ}C$) at the phytotron trial. The deeper the seeding depth, the less the emergence and seedling establishment, and the available seeding depth was I cm in the direct seeding under the flooded soil. In the field trial (seeding date, May 1) the results for the emergence and seedling establishment were similar to those in the phytotron trial. Available cultivars for the direct seeding cultivation under the flooded soil were Cheonmabyeo, Namyangbyeo, Kihobyeo, Akibare, Nakdongbyeo and Dongjinbyeo in Japonica type, and Taebaegbyeo, Samgangbyeo and Gayabyeo in Indica x Jponica type. Coefficients of variation to the emergence and seedling establishment between rice cultivars were very high. Therefore, in the direct seeding cultivation under the submerged paddy, choice of rice cultivars and improved technique for direct seeding will be more necessary.

• Journal of Life Science
• /
• v.17 no.4 s.84
• /
• pp.529-534
• /
• 2007

The effects of dietary eggs on liver and serum lipids, serum protein and mineral concentrations, and enzyme activities in male rats were studied. Sprague-Dawley rats were fed four types of diets for 4 weeks, respectively: a control diet, a control diet supplemented with 5, 10 or 15% eggs powder. In rats fed 5, 10 or 15% egg diets the body weight gain, the food intake, the weights of kidney and epididymal fat pad were similar to those in rats fed the control diet. The hepatic weight, hepatic cholesterol and triglyceride concentrations of rats fed the all egg diets were significantly higher than those of rats fed the control diet. The concentrations of total cholesterol, HDL-cholesterol, LDL+VLDL-cholesterol, triglyceride and phospholipid in the serum of rats fed the all egg diets were similar to those of rats fed the control diet. In the rats fed 5% egg diet the HDL-cholesterol/total-cholesterol ratios was significantly increased, and the atherogenic index was significantly decreased compared with those in the rats fed 10 or 15% egg diets. The serum total protein and albumin concentrations of rats fed 10 or 15% egg diets were significantly increased compared with those of rats fed the control diet. The serum calcium levels of rats fed the all egg diets were significantly increased compared with those of rats fed the control diet. No differences were noted in the concentrations of urea nitrogen, creatinine, glucose and hemoglobin, and activities of GOT, GPT, ${\gamma}-GTP$ and alkaline phosphatase in the serum among the rats with on all the experimental diets. These results showed that the all egg diets feeding increased cholesterol and triglyceride concentrations in liver, but no differences lipids and lipoprotein cholesterol concentrations in serum of rats.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.124-132
• /
• 2018

This research presents the results of an investigation on the characteristic of multi-component blended high fluidity mortars. The binder was blended ordinary Portland cement(OPC), ground granulated blast furnace slag(GGBFS), calcium sulfoaluminate(CSA) and ultra rapid setting cement(URSC). The GGBFS was replaced by OPC from 30%(P7 series), 50%(P5 series) and 70%(P3 series), CSA and URSC was 10% or 20% mass. The superplasticizer of polycarboxylate type were used. A constant water-to-binder ratio(w/b)=0.35 was used for all mixtures. Test were conducted for mini slump, setting time, V-funnel, compressive strength and drying shrinkage. According to the experimental results, the contents of superplasticizer, V-funnel and compressive strength increases with an increase in CSA or URSC contents for all mixtures. Moreover, the setting time and drying shrinkage ratio decrease with and increase in CSA or URSC. CSA decreased dry shrinkage but URSC had less effect. However, the mixed binders of CSA and URSC had a large effect of reducing drying shrinkage by complementary effect. This is effective for improving the initial strength of URSC, and CSA is effective for the expansion and improvement of long-term strength.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.1011-1018
• /
• 2005

The influence of liquid shotcrete accelerators(alkali aluminate, two types of alkali-free) was investigated. Comparing to the existing alkali aluminate accelerator, new alkali-free accelerator, AF2, shortened initial and final setting of cement system, and after curing for 1 day compressive strength was analogous with others. On the other hand, compressive strength of specimen cured for 12 hour was the highest by the addition of alkali aluminate accelerator, but final strength was the lowest by that. But compressive strengths of AF1, AF2 were similar to Plain up to 28day. Further from XRD(X-Ray Diffractometer) and DSC(Differential Scanning Calorimeter) analyses, we confirmed that setting promoted by alkali aluminate was mainly because of Ca(OH)2(calcium hydroxide), but the accelerating behavior of alkali-free was influenced by the needle-like ettringite$(6CaO{\cdot}Al_2O_3{\cdot}3SO_3{\cdot}32H_2O)$ crystal.