• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.757-762
• /
• 1994

본 연구에서는 정밀진단가공을 위한 파인 블랭킹 기술 개발을 위한 파인 블랭킹용 전용 프레스를 사용 하지 않고 범용 유압 프레스에서 조보 유압 장치에 의해 압력을 조절해가면서 가공특성에 관한 실험적 연구와 이론 해석을 수행한다. 실험을 위해 파인 블랭킹 금형과 유압 장치를 설계 제작하고, 정밀진단 특성에 제일 큰 영향을 미치고 있는 V-돌기( Vee-ring)의 유무와 위치 그리고 스트리핑력 및 카운터 펀 칭력 변화에 따른 제품 정밀도를 조사해 가면서 최적의 정밀도 예측 수단으로 적절함을 확인할 수 있었으며, 실험결과는 작업 조건에 관계없이 모든 제품이 깨끗한 전단면을 나타내고 있으며, 일반적으로 스트리핑력이 감소할수록, 그리고 카운터 펀칭력이 증가할수록 캠버량이 감소하고 특히 카운터 펀칭력에 큰 영향을 받고 있음을 알 수 있었다. 이와같은 현상은 유한 요소해석에 의한 캠버량의 예측에섣고 정성적으로 잘 일치하고 있는 것으로 나타났다.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.15-21
• /
• 1997

This study is performed for investigating the effects of stripping and counter punching forces on shearing characteristics in fine blanking of T-shaped products, such as camber, burr-height and dimensional accuracy, etc by experiments. Conventional hydraulic press is used for experiments so that both the stripping force and counter punching force can be arbitrarily adjusted by another hydraulic unit connected to the fine blanking die. Specimens are selected as hot rolled steel sheet and carbon steel sheet commonly used in auto- mobile company. Based on the experimental results, both the dimensional accuracy and the burr height are not influenced by the stripping and counter punching forces, wherease the camber height representing dish- shaped deflection is much influenced by them, it can be seen through this study that the finely cut surface of T-shaped blank can be obtained even in conventional hydraulic press if additional equipments and specially designed die are employed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.598-602
• /
• 1996

This study is performed for investigating the effects of stripping and counter punching force on shearing characteristics in fine blanking, such as camber, burr-height and dimensional accuracy, etc by experiments. Conventional hydraulic press equipped with specially designed hydraulic unit is used for experiments so that both the stripping force and counter punching force are arbitrarily adjusted according to experimental conditions. Two kinds of materials, hot rolled steel sheet(1mm, 3mm) and pure aluminum(1mm, 3mm) are selected in order to examine the influence of strength and thickness of working materials in blanking of T-shaped products. Based on the experimental results of this study, it can be concluded that the finely cut surface of sheared blank can be obtained even in conventional hydraulic press if additional equipments and special dies are employed.