• Title/Summary/Keyword: 침수형

Search Result 214, Processing Time 0.031 seconds

Mapping Inundation Area Using Analysis Result of SWMM (SWMM 분석결과를 이용한 내수침수지도 작성)

  • Lim, Ji On;Na, Seo Hyeon;Lee, Kyung Su
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.486-490
    • /
    • 2017
  • 도심지에서의 침수피해는 이상홍수 및 국지성 호우 시 우수관거 시설기준 미달, 펌프장 등 배수시설이 설치되지 않아 하천의 계획홍수위보다 제내지의 지반고가 낮은 저지대 지역에서 많이 발생하고 있다. 특히, 내수침수의 경우는 외수에 따른 범람보다는 국민의 재산과 인명피해에 직접적인 영향을 미치므로 침수피해 위험도가 높은 지역의 주민에게 그 지역의 침수빈도와 범위를 인지시키고 사전대응 능력을 향상시킬 필요가 있다. 따라서 연구의 목적으로 매년 피해가 발생한 이력이 있는 위험지구에 대해 전국단위 시군구별 침수피해 지도를 작성하여 침수심 산정과 피해액 예측할 수 있는 기초자료로 활용하고, 주민들의 신속한 대처를 통해 그들의 생명과 재산을 보호하여 재난 안전 국가 이미지 제고에 기여하고자 한다. 본 연구에서는 도심지 유출모형인 XP-SWMM을 활용하여 내수재해 위험요인에 대한 전국을 해석하는 것에 한계가 있어 풍수해저감종합계획에 수록된 XP-SWMM모의 분석 결과 값을 활용하고자 하였다. 기 수립된 전국 풍수해저감종합계획의 과거 피해 자료를 바탕으로 이상 집중호우나 태풍의 내습 시 풍수해 피해 발생 가능성이 제일 높은 지역을 연구범위 대상지역으로 선정하였다. 그 중 풍수해의 주요 원인으로서 태풍, 집중호우 및 해일로 인한 피해발생 빈도가 높은 지역이면서 하천재해 및 내수침수 피해가 많은 경기도 동두천시를 연구대상 지역으로 선정하였으며, 대상지 유역 현황과 지형정보 및 빈도별 침수심을 조사하였다. 수록된 내용에 따르면 경기도 동두천시는 우수관망의 밀도가 높은 4개 위험지구를 내수재해 발생가능성 지역으로 선정하여 10년, 20년, 30년, 50년, 100년, 200년 6개 빈도에 대해 XP-SWMM 모의를 실시하였다. 이와 같이 수록된 각 빈도에 대한 모의 결과 값을 GIS기술을 이용하여 디지털화 하고 부가적인 분석을 위한 GIS데이터화 하는 내삽법을 선정하여 침수면적 및 침수심을 산출하였다. 그러나 면적비교를 통해 모의 결과 값을 디지털화 하는 과정에서 많은 오차가 발생되는 것을 확인하였고, 이를 보완하기 위해 좌표보정 자동화 프로그램을 개발하여 이러한 문제점을 제거하여 신뢰도를 향상시켰다. 이렇게 계산된 연구 대상지역의 침수심과 침수면적을 활용하여 지도제작 표준 지침서 및 가이드라인을 제시하여 한국형 호우피해 지도제작 기술개발에 기여하고, 비구조적 대책으로서 이상홍수에 대한 위험도를 파악하여 지역별 도심침수 방지를 위한 대비체계를 구축하는 등 위험지역에 대한 사전분석 및 활용에 기초자료로 도움이 되고자 한다.

  • PDF

Flood Inundation Analysis using XP-SWMM Model in Urban Area (XP-SWMM 모형을 적용한 도시지역의 침수해석)

  • Lee, Jong-Hyeong;Yeon, Kee-Seuk
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.8 no.5
    • /
    • pp.155-161
    • /
    • 2008
  • The flood damage shows different types in natural river watershed and in urban drainage watershed. In recent, increasing of the impervious area gives rise to short concentration time and high peak discharge comparing with natural watershed and it is a cause of urban flood damage. In this paper, we use a XP-SWMM model developed based on EPA-SWMM version for analyzing the inundation area, inundation depth and inundation area considering building effect. The two events(2005.06, 2005.07) has been used for the validation of model. HEC-RAS model has been applied for simulation of changing water level, and the results has been used for calculating area of the inundation. The observed inundation area(21.41 ha) in August, 1998 was in good agreement with the simulated value(23.45 ha) of XPSWMM model. An influence of inundation area considering building effects has been analized by the DTM of XP-SWMM model.

A Study on Application Analysis Using RETRAN Computer Code for the Environmental Qualification Flood Analysis Following the Main Feed Water Line Break (주급수관 파단에 따른 내환경검증 침수분석용 전산코드 RETRAN의 적용 해석연구)

  • Park, Young-Chan;Cho, Cheon-Hwey;Hong, Sung-In
    • Journal of Energy Engineering
    • /
    • v.16 no.3
    • /
    • pp.103-112
    • /
    • 2007
  • Flood issue for nuclear power plants designed and built in 1970 is extremely severe for main steam header compartment and main feedwater line region of intermediate building and lower floor. A calculation for flood level at the main feedwater line isolation compartment is now performing by hand calculation. But, this methodology is quite conservative assumption. The goal of this study was to develop method to analyze flowrate using the RETRAN-3D computer code, and the developed method was applied to flood level analysis following main feedwater line break. As a result of analysis, flood level was low remarkably.

Analysis of the Tsunami Inundation Trace and it's Expectation Area in Coast Using GIS (GIS를 이용한 지진해일시 연안의 침수 흔적 및 예상 지역 분석)

  • Lee Hyung-Seok
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.24 no.2
    • /
    • pp.175-182
    • /
    • 2006
  • The efficient management for minimum losses and demage precautions of fragile region against coastal disasters such as seismic waves and seawater overflows is proceeding continually. This study is to analyze inundation trace and extract expected damage areas with historic records of tsunami using Geographic Information System. Creating a digital elevation model of the Mangsang and the Nobong region in the east coast, we marked inundation record of tsunami and forecasted the flood area with a seismic wave height between 3 m and 5 m. The inundation trace layers and the expected damage areas on the cadastral map layer were superimposed individually. Consequently, the range and lot numbers of inundation expected area were calculated and inundation areas of 5 m tsunami were increased by 2.8 times than 3 m tsunami in case of subject regions. Analyzed results are expected to use evacuation work in case of seismic waves and to predict the compensation of the damaged area. And this study is expected to use suitable countermeasure for prevention from natural disasters.

Assessment for Applicability Medium and Small Streams of Distributed Flood Inundation Model Based on GIS (GIS기반 분포형 홍수범람모형의 중소하천 적용성 평가)

  • Jeong, Gil-Seob;Choi, Seung-Yong;Cheong, Tae-Sung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.404-404
    • /
    • 2012
  • 최근 지구 온난화에 따른 이상 기후변화로 인해 국지성 집중호우와 같은 강우양상이 지속적으로 발생하고 있으며, 집중호우의 빈도 및 규모 또한 커지면서 이에 따른 인명 및 재산피해가 증가하고 있는 실정이다. 이처럼 국지성 호우의 형태로 집중될 경우 중소천에서는 범람이 순식간에 일어나 피해가 가중될 수 있다. 하지만 소하천에서의 홍수발생특성을 고려한 홍수방재시스템의 구축과 같은 대책 수립은 국가하천이나 지방하천에 비해 여러 가지 측면에서 미흡한 것이 현실이다. 따라서 실제 상황에서 효과적인 홍수범람 예측평가 및 실시간 경보발령을 기반으로 한 방재시스템으로 이어지기 위해서는 소하천 유역의 위험성을 평가하기 위한 명확한 기준이나 시스템에 대한 정리와 적절한 대안의 마련이 필요하다. 이에 본 연구에서는 소하천에 적용하기 위한 GIS기반 분포형 홍수범람모형을 개발하고 연구대상지역의 지형자료(수치고도모델, 토지이용도, 토양도)와 기상자료(강우, 기온)를 입력자료로 하여 홍수범람모형을 모의 한 후 일강우(200mm/day, 300mm/day)시 발생 가능한 침수예상도와 비교 분석하였다. 모의 결과 침수예상도와 개발 모형의 침수해석 결과가 비교적 잘 일치하는 것을 확인할 수 있었다. 연구결과는 향후 소하천정비사업 지구 우선선정을 위한 기준제시 및 피해예상지역의 선정을 통해 재해예방효과를 거두기 위한 선정 기준으로 활용이 가능할 것으로 판단된다.

  • PDF

Method for Flood Runoff Analysis of Main Channel Connected with Interior Floodplain : I. Application for Analysis of Inundation Area in Interior Floodplain (제내지와 하도를 연계한 하천유역의 홍수유출해석: I. 제내지 침수해석에의 적용)

  • Jang, Su Hyung;Yoon, Jae Young;Yoon, Yong Nam;Kim, Won Seok
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.1B
    • /
    • pp.79-88
    • /
    • 2006
  • In this study, a methodology is developed for flood runoff analysis considering the interaction between interior floodplain and channel. Riparian lowland is modeled as storage areas by HEC-RAS and is connected with main channel through gravity drainage structure and pumping stations. As a result, we were able to compute the difference between runoff into the interior floodplain and delayed runoff to main channel from interior floodplain. This allowed us to compute the storage change in the interior floodplain and corresponding inundation areas. Furthermore, the levee is modeled as a lateral structure and the flood from the main channel to interior floodplain is modeled by installing a weir on top of it. In addition, levee breach is also modeled so that flooding from main channel to interior floodplain can be considered. Computed flooding depth in the storage areas are compared with elevation to identify the inundated areas and flood maps can then be produced for a desired time or for the extent of flooding given a flooding depth. Output from this modeling effort can provide many useful information for flood planning such as flow depth in main channel, flooding depth and area in interior floodplain. The method was applied to Sapgyo river basin and the comparison with observed flood events showed that it can reproduce the observation fairly well, hence proving the utility of the method.

Development of a Flood Model GUI using Open Source Software (오픈소스 소프트웨어를 이용한 침수해석 모형 GUI 개발)

  • Choi, Yun-Seok;Park, Sang Hoon;Kim, Joo Hun;Kim, Kyung-Tak
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.372-372
    • /
    • 2019
  • 본 논문에서는 격자 기반의 2차원 침수해석 모형인 G2D(Grid based 2-Dimensional land surface flood model)의 GUI 개발에 대해서 기술하였다. G2D 모형은 ASCII 래스터 포맷의 DEM을 이용하여 정형 사각격자로 구성되는 침수모의 도메인을 설정하고, 수위, 수심, 유량 등의 경계조건과 강우와 유량을 연속방정식의 생성항으로 사용하여 2차원 침수모의를 한다. 주요한 침수모의 결과는 ASCII 래스터 포맷을 가지는 수심과 수위 등이다. 이와 같이 G2D 모형은 ASCII 래스터 파일을 주로 이용하고 있다. 본 연구에서는 우선 래스터 파일의 전후처리와 침수모의 결과의 가시화에 대한 편의성을 높이기 위해서 GIS 소프트웨어를 이용하여 GUI를 개발하고자 하였다. 이와 더불어 사용자들이 소프트웨어 구매 비용에 대한 부담을 없애고, 편리하게 사용할 수 있는 오픈소스 소프트웨어를 이용하고자 하였으며, 이 두 가지 조건을 만족할 수 있는 QGIS를 이용해서 G2D 모형의 GUI인 QGIS-G2D를 개발하였다. QGIS-G2D는 QGIS의 plug-in으로 실행된다. QGIS-G2D는 G2D 모형의 실행에 필요한 프로젝트 파일(.g2p)을 GUI를 이용해서 만들 수 있으며, 모의결과를 애니매이션 등으로 가시화 할 수 있는 후처리 기능을 포함하고 있다. 또한 QGIS-G2D는 DEM 수정 기능과 같이 G2D 모형의 입력자료 전처리를 위해서 QGIS plug-in으로 제공되는 여러 가지 기능을 함께 이용할 수 있다. 또한 물리적 분포형 강우-유출 모형인 GRM(Grid based Rainfall-runoff Model)의 QGIS plug-in인 QGIS-GRM과 연계하여, 유역 유출모의와 침수모의를 QGIS 환경에서 함께 수행할 수도 있다. 개발된 소프트웨어는 오픈소스 플랫폼인 GitHub(https://github.com/floodmodel/)를 통해서 제공된다. 본 연구를 통해서 홍수해석에 필요한 강우-유출 모의와 침수모의를 위한 모형을 제공하고, 이를 편리하게 활용할 수 있는 오픈소스 소프트웨어를 제공할 수 있었다. 이러한 연구들은 홍수 분야의 전문가들에 의해서 다양한 분야의 홍수해석에 사용될 수 있을 것으로 기대한다.

  • PDF

Identification of Palustrine Wetlands in Paldang Reservoir Using Spectral Mixture Analysis of Multi-temporal Landsat Imagery (다중시기 위성영상의 분광혼합화소분석에 의한 팔당 상수원보호구역의 소택형 습지 판별)

  • Kim, Sang-Wook;Park, Chong-Hwa
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.7 no.3
    • /
    • pp.48-55
    • /
    • 2004
  • 본 연구는 중 저해상도 위성영상을 이용하여 하천주변 습지를 판별해내는 보다 개선된 기법을 개발해 내는데 그 목적이 있다. 중 저해상도 위성영상의 하나의 화소는 일반적으로 하나의 동질한 물체의 분광반사값을 나타내기보다는 다양한 분광값을 가진 물체들의 대표값으로 나타나게 된다. 특히 본 연구에서는 식생, 수문 및 토양요소의 혼합체인 습지의 판별을 위해서, 하나의 화소가 하나의 물체를 대표함을 전제로 하는 기존의 분석방법 보다는, 혼합화소 (mixed pixel)를 대상지 의 토지 피복을 가장 잘 반영 하는 순수한 화소값(endmember)들로 분해함으로써 보다 정확한 판별 및 분류를 가능케 하고자 하였다. 이를 위하여 일반적으로 극세분광 위성영상의 분석에 활용되는 기법인 분광혼합화소분석(Spectral Mixture Analysis)을 이용하였는데, 습지 각 화소의 식생, 수문 및 토양요소의 흔합정도를 분해한 후, 이들의 분할영상 (fraction images)을 추출해내고 이를 분석에 이용하였다. 팔당상수원보호구역의 소택형 습지를 대상으로 봄 가을의 Landsat 영상에 대한 분석을 수행하였으며, 도출된 결과는 다음과 같다. 첫째, 봄 가을 각각의 영상에 대하여 4개씩 endmember를 선정하였으며, 분할영상과 원자료 각각에 대하여 습지판별을 수행한 결과, 가을영상에 대하여 분할영상을 이용한 방법의 소택 형 습지 판별 정확도가 가장 높은 값을 보여주었다(생산자 정확도 : 83.3%, 사용자 정확도 : 86.5%). 둘째, 소택형 습지로 판별된 지역만을 대상으로 보다 세분화된 분류가 가능한 지 알아보기 위하여 소택형 습지로 판별된 지역의 영상에 대해 ISODATA 무감독분류를 수행한 결과 2개의 클러스터로 대별되었다. 현장조사, 기존 연구의 수심자료 및 식생에 대한 조사를 바탕으로 위의 2개의 클러스터를 조사한 결과, 수문조건에 따른 분류인 아계(subsystem) 단계의 '영구적 침수형 소택형 습지'와 '계절적 침수형 소택형 습지'로 분류할 수 있었다.

Development of distributed inundation routing method using SIMOD method (SIMOD 기법을 이용한 분포형 침수 추적 기법 개발)

  • Lee, Suk Ho;Lee, Dong Seop;Kim, Jin Man;Kim, Byung Sik
    • Journal of Korea Water Resources Association
    • /
    • v.49 no.7
    • /
    • pp.579-588
    • /
    • 2016
  • Changes in precipitation due to climate change is made to induce the local and intensive rainfall, it is increasing damage caused by inland inundation. Therefore, it requires a technique for predicting damage caused by flooding. In this study, in order to determine whether this flood inundated by any route when the levee was destroyed, Which can simulate the path of the flood inundation model was developed for the SIMOD (Simplified Inundation MODel). Multi Direction Method (MDM) for differential distributing the adjacent cells by using the slope and Flat-Water Assumption (FWA)-If more than one level higher in the cell adjacent to the cell level is the lowest altitude that increases the water level is equal to the adjacent cells- were applied For the evaluation of the model by setting the flooding scenarios were estimated hourly range from the target area. SIMOD model can significantly reduce simulation time because they use a simple input data of topography (DEM) and inflow flood. Since it is possible to predict results within minutes, if you can only identify inflow flood through the runoff model or levee collapse model. Therefore, it could be used to establish an evacuation plan due to flooding, such as EAP (Emergency Action Plan).

Lodging Pattern of Rice Plant in Broadcast-Seeded and Hand -Transplanted Cultivation (벼 담수표면직파재배와 손이앙재배의 도복발생 발생 양상)

  • Kim, Je-Kyu;Lee, Moon-Hee;Oh, Yun-Jin
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.38 no.3
    • /
    • pp.219-227
    • /
    • 1993
  • Broadcast-seeded rice in submerged paddy frequently lodge in the field. In general, the causes of lodging in rice cultivation differ with different cultural methods. This study was conducted to investigate the causes of lodging in broadcast-seeded rice (BSR) and hand-transplanted rice (HTR) under four nitrogen (N) levels. Lodging in BSR was mainly a root lodging due to shallow root distribution, while that in HTR showed a bending type owing to deep rooting system. At the upper soil layer (0-5cm from the surface of ground) the root distribution of BSR (65.2%) was much larger than that of HTR (51.6%), whereas at the 5-10cm soil layer the root distribution of BSR (18.5%) was much smaller than that of HTR (28.0%). The depth of buried culm base was much shallower in BSR (1.2cm) than in HTR (4.0cm). The plant height, fresh weight, lodging index, culm diameter and thickness in HTR were much greater than those in BSR, and the breaking strength of lower internode was similar in the two cultivation methods indicating that HTR would have more lodging causes than BSR. In spite of . the more advantages to lodging resistance in BSR it severely lodged in the field. The main lodging-inducing factors of BSR were the shallow root distribution and shallow depth of buried culm base. Besides these, the higher ratio of gravity center of culm was an important factor. This result suggested that for the fundamental prevention of lodging in BSR, an ideotype of rice plant with ' a deep-rooted behavior ' should be developed.

  • PDF