• Korean Journal of Materials Research
• /
• v.7 no.5
• /
• pp.423-430
• /
• 1997

졸-겔 dip coating법에 의해 제조한 바륨페라이트 박막의 미세구조와 결정학적인 구조 특성에 관해 조사하였다. 기판에 형성된 바륨페라이트 입자는 침상 형태의 입자들로 구성되어 있었으며, C축은 장축 방향이었고, 막 두께가 증가함에 따라 침상형 입자들은 기판에 평행하게 배향하는 경향을 나타내었다. 박막은 바륨페라이트층, Ba, Fe, SiO$_{2}$로 구성되어 있는 중간층, 그리고 기판층인 SiO$_{2}$층으로 구성되어 있었으며, 중간층과 SiO$_{2}$층간의 계면은 Ba 와 SiO$_{2}$간의 화합물로 구성되어 있었다. 침상 형태의 입자는 95$0^{\circ}C$에서 3시간 열처리하므로써 완전히 소실하였고, 130$0^{\circ}C$에서 3시간 열처리하므로써 c면이 기판에 평행하게 위치하는 완전한 육각판상 형태의 입자로 변화되었다.

• Proceedings of the KWS Conference
• /
• 2000.04a
• /
• pp.75-77
• /
• 2000

• Journal of Welding and Joining
• /
• v.18 no.6
• /
• pp.25-32
• /
• 2000

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.37-44
• /
• 1997

Barium ferrite thin films on the thermal oxidized Si substrate were prepared by using sol-gel method (dip coating) from the sol of composition ratio of 5.25, designated by mole ratio 2Fe/Ba. The gelation process was largely divided into 4 step, and the sol prepared by reaction for 90 minutes at 8$0^{\circ}C$ was the suit-able for coating. Needle shaped particles formed on the coating layer were placed parallel to substrate and the inclination was increased with film thickness. The easy-direction of magnetization of needle shaped par-ticles was long-axis direction.

• Journal of Welding and Joining
• /
• v.17 no.3
• /
• pp.96-101
• /
• 1999

Microstructures and mechanical properties of weldments were studied for EH36 TMCP higher-strength hull steel with electrogas welding jprocess. In case of a newly designed EH36 TMCP steel for large heat input welding process, the Microstructures of HAZ shows more narrow width of grain coarsed region than that of conventional EH36 TMCP weldments, the amount of acicular ferrite, which is beneficial to impact toughness, increased while the amount of grain-boundary ferrite decreased. Charpy V-notched impact tests show that a newly designed EH36 TMCP steel weldment satisfies all the requirement of specifications, especially at the fusion line +2mm where the conventional EH36 TMCP steel fails to exceed the requirement.

• Journal of Welding and Joining
• /
• v.14 no.1
• /
• pp.68-74
• /
• 1996

The microstructure of HAZ and the mechanical properties in weldments such as hardness and toughness were studied for mild steel and AH36 grade TMCP steel, as increasing heat input with electrogas welding process. The results of this study can be summarized as follow: 1) In the HAZ of mild steel, the width of coarse grained zone was larger than that of the nomalized zone, however in the case of TMCP steel, the nomalized zone was wider than the coarse grained zone. 2) The grain size of HAZ become coarse with increasing heat input. And at the same heat input, the grain size of TMCP steel was more coarser than that of mild steel. 3) According to the change of heat input, the deviation of hardness values was not significant, and the maximum values of hardness was not in HAZ but in the weld metal. And the hardness values in root part was higher than in face part. 4) Even though the HAZ grain size of mild steel was larger than that of TMCP steel, the impact values for mild steel was higher than those for TMCP steel, and the impact values in face part was higher than those in root part.

• Journal of Welding and Joining
• /
• v.27 no.1
• /
• pp.14-19
• /
• 2009

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.351-353
• /
• 2007

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.250-252
• /
• 2006

• Proceedings of the KWS Conference
• /
• 2008.05a
• /
• pp.3-3
• /
• 2008