• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.193-201
• /
• 2011

The Geopung Cu deposit consists of two subparallel quartz veins that till the NE-trending fissures in Triassic Cheongsan granite. The quartz veins occur mainly massive with partially cavity and breccia. They can be followed along strike for about 500 m and varies in thickness from 0.2 to 2.2 m. Based on the mineralogy and paragenesis of veins, mineralization of quartz veins can be divided into hypogene and supergene stages. Hypogene stage is associated with hydrothermal alteration minerals such as sericite, pyrite, quartz, chlorite, clay minerals and sulfides such as pyrite, arsenopyrite, pyrrhotite, marcasite, sphalerite, stannite, chalcopyrite and galena. Supergene stage is composed of geothite. Fluid inclusion data from quartz indicate that homogenization temperatures and salinity of hypogene stage range from 163 to $356^{\circ}C$ and from 0.2 to 7.2 wt.% eq. NaCl, respectively. They suggest that ore forming fluids were progressively cooled and diluted from mixing with meteoric water. Sulfur (${\delta}^{34}S$: 4.3~9.2‰) isotope composition indicates that ore sulfur was derived from mainly magmatic source although there is a partial derivation from the host rocks. The calculated oxygen (${\delta}^{18}O$: 0.9~4.0‰) and hydrogen (${\delta}D$: -86~-69‰) isotope compositions suggest that magmatic and meteoric ore fluids were equally important for the formation of the Geopung Cu deposit and then overlapped to some degree with another type of meteoric water during mineralization.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.43-57
• /
• 1977

In order to establish methods of potato processing for mixed cooking with rice as main diet, treatment for polyphenol oxidase inactivation in potato tissues, and safety in regard to sanitation were studied. The results were summarized as follows: 1. Cut potato granule which were blanched in boiling water are practical and best in color within $3{\sim}6\;minutes$ dipping. 2. Dipping treatment of potato granules in a saline solution is not pratical because of the resulting color and saline taste. 3. Dipping treatment of potato granules in a boiling saline solution is not practical because of residual salt. 4. Dipping treatment of potato granules in low concentration of hydrochloric acid solution is not effective in color changes but dipping treatment from 0.1N concentration for 4-10 minutes to 0.5N concentration for $1{\sim}10minutes$ shows good effects. 5. Dipping treatment in boiling hydrochloric acid solution of 0.04-0.068N concentration for 3-5 minutes dipping is practical for its resulting color. 6. Dipping treatments in 0.05% of $K_2S_20_5$ solution for $50{\sim}60\;minutes$ and in 0.06% for $40{\sim}60\;minutes$ and 0.065% for $10{\sim}60\;minutes$ shows a small palatability in color but its boiled potato granules shows good color 7. Treatments for any time in $0.01{\sim}0.03%$ of boiling $K_2K_20_5$ solution after predipping in its cold solution for longer time than 30minutes show effective in the color and palatability of the potato granules and their cooked ones. 8. From the view of food sanitation, dipping treatment of the potato granules in the solution of $K_2S_20_5$ is safe because of the few residual amount of $SO_2$. 9. All the methods of treatment that potato granules are dipped for any time at 0.01% of $K_2S_20_5$ solution are safe from the view of fond sanitation. At 0.03% of $K_2S_20_5$ solution, nothing but the methods of treatment that they are dipped within 30 minutes and boiled within 4 minutes are safe.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.552-557
• /
• 2015

A numerical simulation studies were performed to investigate a manoeuvring characteristics as function of stern hull form with the mathematical model. In order to consider the effect of the stern hull form and obtain the manoeuvring characteristics, a parameter($C_{wa}$) which is aft. water plane area coefficient is modified. Because modifying $C_{wa}$(${\pm}2%$) means that the stern hull form is modified to V-type or U-type, the numerical simulation was performed with this modified $C_{wa}$. A changing trend for the manoeuvring characteristics not only in deep water but also in shallow water such as directional stability, turning and zig-zag was investigated and presented as the results. Present study showed that the manoeuvrability in shallow water largely changed when the draught and water depth ratio(=d/H) become 0.5, and the stern hull form can affect to the manoeuvrability of a vessel navigating in restricted water depth. In addition, it showed that approaching the stern hull to U-type makes the advance and tactical diameter of turning motion large and the overshoot angle of zig-zag motions small. Otherwise, it showed approaching the stern hull form to V-type makes the advance and tactical diameter of turning motion small and the overshoot angle of zig-zag motions large in the present study.

• Journal of Sericultural and Entomological Science
• /
• v.9
• /
• pp.49-66
• /
• 1969

Eri-silkworm is known as a tropical insect where as poly-voltine type in that area. It eats caster oil plant leaves which are cultivated as an every year cultivatable seed oil use in this country, even though it grows for many years in tropical countries. That is why, farmers have freedom for its cultivation in any year if they want. Therefore, eri-silkworm rearing service is flexible for its diet procurment as wish of farmer. The eri-cocoon price or economical fluctuation may be reactable for the rearing work not like as mulberry cocoon. Fortunately, it also eats cynthia tree leaves. Standing from such a easy condition, the authors have studied about this problem since 1963 to develope a culturing method of eri-silkworm rearing in this country and the authors brought out the matters to be produced as an industry scale. Here, the authors summarized their works of the results covering with thirty three work tables. The obtained results are as follows.

• The Korean Journal of Mycology
• /
• v.15 no.3
• /
• pp.175-182
• /
• 1987

A raw starch saccharifying enzyme from Aspergillus sp. SN-871 was purified by ammonium sulfate precipitation, DEAE-cellulose column chromatography, CM-Sephadex C-50 column chromatography and Sephadex G-75 gel filtration. The specific activity of purified enzyme was 18 fold and the yeild was 13.40%. The molecular weight of the purified enzyme was estimated as approximately 40,000 dalton by the method of Andrews gel filtration. The optimum pH and temperature for this enzyme were found to be 4 and $40^{\circ}C$, respectively and the stable range of pH was 2 to 5. The enzyme was themostable at below $60^{\circ}C$ and inactivated at $70^{\circ}C$. It showed a tendency to increase the enzyme activity under the presence of 0.01 M $BaCl_2$, but under 0.01 M$Pb(NO_3)_2$, $AgSO_4$, and $K_3Fe(CN)_6$ and citric acid etc. inhibited it completely. The substrate specifity of enzyme showed a tendency to increase the enzyme activity under addition of dextrin and glycogen, but under saccharose inhibited it. COD removal rate of Aspergillus sp. SN-871 was approximately 67 to 68%.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.4
• /
• pp.303-314
• /
• 2001

Background : Matrix metalioproteinase(MMP)-2 and MMP-9 have been known to play an important role in cell migration and the tissue remodeling process by type IV collagen lysis, a major component of the basement membrane. Intra-alveolar fibrosis, secondary to an injury to the basement membrane of the alveolar epithelial lining, is a major process in the pathogenesis of idiopathic pulmonary fibrosis(IPF). Therefore, MMP-2 and MMP-9 was hypothesized to play an important role in IPF pathogenesis. As a result, their level may reflect the activity or prognosis. Method : Forty one progressive IPF patients(age $59.82{\pm}1.73$ years, M:F=23:18), 16 patients with stable IPF for more than one year without therapy(age : $63.6{\pm}2.8$ years, M:F=13:3), and 7 normal controls were enrolled in this study. The MMP-2 and MMP-9 levels in the BAL fluid and alveolar macrophage conditioned media(AM-CM) were measured by zymography and the TIMP-1 level was measured by ELISA. Results : 1) The MMP-2 level in BALF was highest in the progressive IPF group ($1.36{\pm}0.28$) followed by the stable group ($0.46{\pm}0.13$) and the controls ($0.08{\pm}0.09$), which was statistically significant. The MMP-9 level of the IPF ($0.31{\pm}0.058$) and the stable group ($0.22{\pm}0.078$) were higher than that of the control group ($0.002{\pm}0.004$). In the AM-CM, only MMP-9 was detected, which was significantly higher in IPF group ($0.80{\pm}0.1O$) than in the control group($0.23{\pm}0.081$). The TIMP-1 level was also higher in both the IPF ($36.34{\pm}8.62\;{\mu}g/ml$) and stable group ($20.83{\pm}8.53\;{\mu}g/ml$) compared to the control group ($2.80{\pm}1.05\;{\mu}g/ml$) (p<0.05). 3) There was a correlation between the MMP-2 level in the BALF with the total cell number(r=0.298) and neutrophils(r=0.357) (p<0.05), and the MMP-9 level with the number of neutrophils (r=0.407) and lymphocytes (r=0.574)(p<0.05). The TIMP-1 level correlated with the total number of cell (r=0.338, p<0.05) and neutrophils(r=0.449, p=0.059). Conclusion : Both MMP and TIMP appear to play an important role in IPF pathogenesis, and their level may reflect the disease activity.

• Radiation Oncology Journal
• /
• v.13 no.4
• /
• pp.403-409
• /
• 1995

Purpose : Authors tried to enhance the safety and accuracy of radiosurgery by verifying stereotacitc target point in actual treatment position prior to irradiation. Materials and Methods : Before the actual treatment, several sections of anthropomorphic head phantom were used to create a condition of unknown coordinates of the target point. A film was sandwitched between the phantom sections and punctured by sharp needle tip. The tip of the needle represented the target point. The head phantom was fixed to the stereotactic ring and CT scan was done with CT localizer attached to the ring. After the CT scanning, the stereotactic coordinates of the target point were determined. The head phantom was secured to accelerator's treatment couch and the movement of laser isocenter to the stereotactic coordinates determined by CT scanning was performed using target positioner. Accelerator's anteroposterior and lateral portal films were taken using angiographic localizers. The stereotactic coordinates determined by analysis of portal films were compared with the stereotactic coordinates previously determined by CT scanning. Following the correction of discrepancy the head phantom was irradiated using a stereotactic technique of several arcs. After the irradiation, the film which was sandwitched between the phantom sections was developed and the degree of coincidence between the center of the radiation distribution with the target point represented by the hole in the film was measured. In the treatment of the actual patients, the way of determining the stereotactic coordinates with CT localizers and angiograuhic localizers was the same as the phantom study. After the correction of the discrepancy between two sets of coordinates, we proceeded to the irradiation of the actual patient. Results : In the phantom study, the agreement between the center of the radiation distribution and the localized target point was very good. By measuring optical density profiles of the sandwitched film along axes that intersected the target point, authors could confirm the discrepancy was 0.3 mm. In the treatment of an actual patient, the discrepancy between the stereotactic coordinates with CT localizers and angiographic localizers was 0.6 mm. Conclusion : By verifying stereotactic target point in actual treatment position prior to irradiation, the accuracy and safety of streotactic radiosurgery procedure were established.

• Journal of Animal Environmental Science
• /
• v.15 no.2
• /
• pp.91-98
• /
• 2009

Object of this study were to determine the influence of collection times of rumen fluid on in vitro dry matter digestibility (IVDMD) of forage crops. The donor cow was fed concentrate once a day and given free access to grass-legume mixture hay. Main plot was consisted of different collection time of rumen fluid; T1: 1 hour before concentrate feeding, T2: 1 hour after feeding, T3: 4 hour after feeding and T4: 8 hour after feeding. A total of 7 samples of 4 different forage crops (barely, Italian ryegrass, crimson clover, rye) were used for the estimation of IVDMD and tested in three replicates. For the $DAISY^{II}$ incubation, each sample was inserted into each filter bag then heat-sealed and incubated in a digestion vessel for 48 h at $39^{\circ}C$. The times of rumen fluid collection had no significant effect on the IVDMD values over all varieties except for 2 breeds of IRG (Kogreen and Kospeed). IVDMD values with T1 over all varieties were slightly higher than other treatments, however those with both T1 of Kogreen and Kospeed varieties were significantly higher than T2 (p<.05).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.3
• /
• pp.261-275
• /
• 2020

When excavating a small cross-section tunnel in a fault fracture zone using the shield TBM method, there is a high possibility of excessive convergence and collapse. Appropriate ground reinforcement is required to minimize construction cost loss and trouble due to a fault fracture zone. In this study, the optimal reinforcement area was suggested and the surrounding ground behavior was investigated through numerical analysis using MIDAS GTS NX (Ver. 280). For the parameters, the width of the fault fracture zone, the existence of fault gouge, and the groundwater level and depth of cover were applied. As a result, when there is not fault gouge, the convergence and ground settlement are satisfied the standard when applying ground reinforcement by up to 0.5D. And, due to the high permeability coefficient, it is judged that it is necessary to apply 0.5D reinforcement. There is a fault gouge, it was possible to secure stability when applying ground reinforcement between the entire fault fracture zone from the top of the tunnel to 0.5D. And, because the groundwater discharge occurred within the standard value due to the fault gouge, reinforcement was unnecessary.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.205-208
• /
• 2005

최근 열선 화학 기상 증착법(HWCVD)은 낮은 온도에서 TFT용 Poly Si 중착을 할 수 있다는 점과 실리콘 박막을 빠른 속도로 증착할 수 있다는 점에서 각광을 받고 있다. 본 연구에서는 HWCVD를 이용하여 태양전지를 제조하고 그 특성을 평가하였다. 조건에 따른 실리콘 박막의 특성 변화를 알기 위해 corning glass 및 실리콘 wafer에 다양한 조건에서 단위 박막(intrinsic layer)을 증착하였고 이 결과를 바탕으로 p/i/n 구조의 태양전지를 제조하였다. Ta 열선 온도는 1700-2000도였고 가스 원료인 $SiH_4$와 수소의 비율을 조절하면서 그 영향을 관찰하였다. 태양전지의 경우 p충과 n충은 PECVD로 증착하였으며 단위박막 및 태양전지 i충 증착시 기판과 열선간의 거리는 7cm, 기판 온도는 $200^{\circ}C$와 $250^{\circ}C$로 고정하였고 작업압력은 30mTorr였다. 단위 박막 특성 평가를 위해 암/광 전도도, SEM, Raman Scattering, FT-IR등을 사용하였으며 태양전지 특성 평가를 위해 I-V 및 Spectral response를 측정하였다. 열선 온도가 증가함에 따라 증착속도 및 결정화 분율은 증가하였다. 특히 비정질에서 결정질로 전이되는 구간은 매우 좁았으며 여러 분석 방법에서 일치되는 결과를 보였다. $SiH_4$ 유량이 늘어날수록 비정질이 결정질로 바뀌는 열선 온도가 증가하였으며 기판 온도가 낮을 경우 또한 결정으로 바뀌는 열선 온도가 증가하였다. 태양전지의 경우 열선 온도가 증가함에 따라 $V_{oc}$ 및 W가 낮아졌으며 $J_{sc}$, 는 증가하는 경향을 보였으며 결정질 비율이 증가하는 것을 관찰할 수 있었다. 이러한 경향은 quantum efficiency 결과에서도 확인할 수 있었다.용을 반복하면서 석재 내부와 외부의 암석 및 결정에 균열과 미세열극 등이 생성되어 석재 자체의 구조적 안정성에 영향을 주고 있다. 따라서 감은사지 석탑은 지리적 환경 차이로 인해 일반적인 환경의 석조물들과는 다른 형태의 풍화양상을 보이고 있어서 풍화양상 및 풍화형태에 대한 정확한 연구와 이해를 바탕으로 보존대책이 마련되어야 한다.되었다. 이런 모든 시편들을 각 탈염방법에 따라 탈염처리한 후 XRD와 SEM-EDS으로 분석한 결과 인철광과 침철광은 어떠한 변화도 보이지 않았고, 다만 적금광으로 동정된 시편만이 잔존하지 않았다. 철기 제작별 $Cl^-$ 이온 추출량과 탈염효과에 대한 비교 실험은 이온 크로마토그래피 분석 결과와 마찬가지로 단조 철제유물이 주조 철제보다 $Cl^-$ 이온을 많이 가지고 있었으며, 탈염 처리 후에는 $Cl^-$ 이온은 전혀 발견되지 않았다. 이상의 결과 $K_2CO_3$와 Sodium 용액은 탈염처리에서 가장 적합한 탈염처리 용액으로 알수가 있었으며 특히 어떠한 탈염 용액으로 유물을 처리한다 해도 철제유물에 생성된 부식물은 제거되지 않는다는 것을 알게 되었다. 따라서 보존처리자는 유물 표면의 부식 상태만을 보고 처리하기 보다는 철기제작물로 고려하여 처리하는 것이 필요하다. 또한 금속에 부식을 야기시키는 $Cl^-$ 이온과 부식물을 완전하게 제거하여 탈염처리를 하는 것이 유물 부식을 최대한 지연시킬 수 있는 것이라 생각된다.TEX>$88\%$)였다.(P=0.063). 결론: 본 연구에서는 MTHFR C/T & T/T 유전자 다형성이 위암의 발생과 그 위치에 대해 관련이 있는 것으로 여겨지고, 흡연력, 음주력과는 관련이 없는 것으로 여겨진다.험이 커지는 경향을 보였으나, 나이 및 병기, 종양의 크기, MD-BED $Gy_{10}$ 등의 예후 인자를 보정한 다변