• The Journal of the Korean dental association
• /
• v.16 no.3 s.106
• /
• pp.223-234
• /
• 1978

성장기에 있어서 치아우식병발생은 특히 국민학교아동에게서 크게 나타나며 손쉬운 대책으로 발전된 것이' 치과치료사(dental therapist)혹은 치과간호원(dental nurse)제도이다. 이 제도는 약 50년전 Newzealand에서 시작되어 국민학교아동에 대한 간단한 치료와 구강위생교육급예방에 대한 제도를 주임무로 삼고 각학교에 배치되었다. 최근 이 제도는 대양주각국에 도입되어 유사업무에 임하고 있다. 한국에는 각종보조원학교가 있으나 이 제도와는 업무분야가 다르고 국민학교아동에 대한 전담제도가 확립되어 있지 않기에 '뉴-사우스웨일즈주'에 있는 학교를 예로 들어 학교의 행선적구조, 인력, 교과내용 훈련방법, 실사회활동, 급 본인들의 직업적 만족도등을 조사연구하였음.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1257-1265
• /
• 1998

Hertzian contact tests were used to investigate the evolution of fracturedamage in the coating layer as functions of contact load and coating thickness by studying crack patterns in porcelain on glass-infiltrated alumina bilayer system conceived to simulate the crown structure of a tooth. Cone cracks initiated at the coating top surface without delamination at interface and crack propagation to substrate. Preferentially the cracks made multi-cracks at the coating top surface rather than proceeding to interface. The cracks were highly stabilized with wide ranges between the loads to initiate first cracking and to cause final failure im-plying damage-tolerant capability. Finite element modelling was used to evaluate the stress distribution. Maximum tensile stress were responsible for the cracking at the coating layer and had a profound influence on the crack pattern and fracture damage in the layered structure materials.

• Korean Journal of Materials Research
• /
• v.17 no.10
• /
• pp.544-547
• /
• 2007

Human teeth were scratched by the abrasive paper, dropping in hydroxyapatite solution during 1, 2, 3, 4 months. We studied teeth surface change with SEM each months. After 1 months treatment the surface appeared the change. Because of the hydroxyapatite ion exchange mechanism. The scratched surface was recovered by the hydroxyapatite. The results of EDS showed that $Ca^{2+}$ ion and $PO_4^{3-}$ ion were removed from hydroxyapatite solution to scratched teeth surface.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.4
• /
• pp.337-347
• /
• 2011

The basic structure of the primary crowns usually resemble their succeeding permanent teeth. However, maxillary second primary molars resemble ipsilateral first permanent molars. Accordingly in this study, odontometric data of the two teeth was obtained, then analyzed to verify the morphological relationship and sex difference between the two teeth. Dental study casts were examined for their mesiodistal and buccolingual width of the crowns, diameter of each cusps, and intercuspal distances. Photographs of the crowns were taken to measure the angles between each cusp tip. The results are as follows : 1. In boys, PrI, PaI, DBC angle, and MBC angle did not show any statistically significant difference between the two teeth(p>0.05), and moderate level of correlations were observed. 2. In girls, crown index, DBC angle, and MBC angle of the two teeth did not show any statistically significant difference(p>0.05), and moderate level of correlations were recognized. 3. Measurements that did not show statistically significant difference between the two teeth in both boys and girls were DBC angle and MBC angle(p>0.05). In DLC angle, however, statistically significant difference was observed(p<0.01). 4. Most of the measurements showed sex differences, except DBC angle, which did not show any sex difference in both teeth(p>0.05).

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.324-332
• /
• 2009

The purpose of this study was to investigate the effect of rigidity of post core systems on stress distribution by the theoretical technique, finite element stress-analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia ceramic crown were prepared and 1.5 mm ferrule height was provided. Each model contained cortical bone, trabecular bone, periodontal ligament, 4 mm apical root canal filling, and post-and-core. Six combinations of three parallel type post (zirconia ceramic, glass fiber, and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. A 50 N static occlusal load was applied to the palatal surface of the crown with a $60^{\circ}$angle to the long axis of the tooth. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. An increase of the elastic modulus of the post material increased the stress, but shifted the maximum stress location from the dentin surface to the post material. Buccal side of cervical region (junction of core and crown) of the glass fiber post restored tooth was subjected to the highest stress concentration. Maximum von Mises stress in the remaining radicular tooth structure for low elastic modulus resin core (29.21 MPa) was slightly higher than that for high elastic modulus resin core (29.14 MPa) in case of glass fiber post. Maximum displacement of glass fiber post restored tooth was higher than that of zirconia ceramic or stainless steel post restored tooth.

• Progress in Medical Physics
• /
• v.12 no.1
• /
• pp.51-58
• /
• 2001

Synchrotron radiation (SR) has several advantages over convetional x-rays, including its phase, collimation, and high flux. A synchrotron radiation beamline 5C1 at Pohang Light Source (PLS) was recently built for imaging applications. We have shown that a SR imaging system is useful in imaging microscopic structures. SR with broad-band energy spectrum were adjusted to an object by Si wafers and their energy were approximately ranging from 6 keV to 30 keV. SR were passed through an object and finally transformed into visible lights by CdWO$_4$ scintillator screen. The visible lights which were reflected at an angle of 90 degrees by gold plated mirror were detected by a CCD camera and the image data were acquired using image acquisition system. A high-resolution phantom, capacitor, adult tooth, child tooth, cancerous breast tissue, and mouse lumbar vertebra were imaged with SR imaging system. The Objects were rotated within the field of view of the CCD detector, and their projection image data were obtained at 250 steps over 180 degrees rotation. Image reconstructions were carried out in a PC by using IDLTM(Research systems, Inc., US) program. The spatial resolution of the images acquired by the SR imaging system was measured with a high-resolution chart manufactured for several micrometer resolution. The specimens were also imaged with conventional x-ray radiography system to compare the image quality of radiography obtained with the SR imaging system. The results showed more structural details and high contrast images with SR imaging system than conventional x-ray radiography system. The SR imaging system may have a potential for imaging in biological researches, material applications, and clinical radiography.

• Journal of the Korean Society of Radiology
• /
• v.7 no.2
• /
• pp.131-136
• /
• 2013

Panorama of dental radiation generators can observe the wide anatomical structures of oral and maxillofacial areas but there can be distortion of lengths, angles, or shapes. CBCT can diagnose 3D images and get the ones whose errors by superposition and interference are remarkably smaller between anatomical structures. But the quality of the images by movement of subjects can be lowered as it takes long to diagnose them. And if there are impermeable radiation objects like metal in mouths, impermeable radiation lines can radially appear with the objects as center. This study tries to analyze accuracy of panorama and CBCT and get useful anatomical information in dental treatment by comparing the length of wisdom teeth which were measured by Panorama and CBCT with the teeth which were actually extracted and analyzing distortion of the teeth. The test result could be found that Panorama is expanded by average 7.3% as the errors of Panorama and Digital Vernier Caliper range from 110.7% to 103.9%. The length of wisdom teeth which were measured in CBCT and Digital Vernier Caliper could be found that the error range is 1.3%. And the length of wisdom teeth which were measured in Panorama and Digital Vernier Caliper has found that the error range shows 7.3%. So it could be found that the images of CBCT is about 6% more exact than those of Panorama. It could be found that CBCT shows the more exact images than those of Panorama. But because the examination expenses of CBCT are higher than those of Panorama and exposure dose of CBCT is much more than that of Panorama, it is thought to find proper ways in examination.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.173-178
• /
• 2018

The direct metal laser sintering (DMLS) technique would be promising for the full-arch implant-supported restorations due to reduced cost and manufacturing time without potential human errors and casting defects. The aims of this case report were to describe the successful outcome of an implant-supported fixed dental prosthesis in the edentulous maxilla by using the DMLS technology and computer-aided design and computer-aided manufacturing (CAD/CAM) monolithic zirconia crowns, and to describe its clinical implications. A healthy 51-year-old Korean woman visited Seoul National University Dental Hospital and she was in need of a rehabilitation of her entire maxilla due to severe tooth mobility. In this case, all maxillary teeth were extracted and an implant-supported fixed dental prosthesis was fabricated that involved a cobalt-chromium (Co-Cr) framework with the DMLS technique and CAD/CAM monolithic zirconia crowns. Six months after delivery, no distinct mechanical and biological complications were detected and the prosthesis exhibited satisfactory esthetics and function. In this case report, with the DMLS system, the three-dimensional printed prosthesis was created without additional manual tooling and thus, reliable accuracy and passive fit were obtained.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.80-91
• /
• 2003

Mutans streptococci, especially S. mutans and S. sobrinus strongly implicated in pathogenesis of dental caries, the major cause of tooth loss in children. Use of an antibacterial agent controlling dental caries has been rationalized. The present study was performed to observe the antibacterial effect of inorganic polyphosphates (polyP) on S. mutans and S. sobrinus. S. mutans GS5 and S. sobrinus 6715 were grown in brain-heart infusion broth with or without polyP. Minimal inhibitory concentration (MIC) of polyP for S. mutans GS5 was determined to be 0.08% and that for S. sobrius 6715 was 0.17%. PolyP 15 added to the growing culture of S. mutans GS5 and S. sobrinus 6715 at their exponential phase was as effective in inhibiting the growth of S. mutans GS5 and S. sobrinus 6715 as polyP added at the very beginning of the culture. More than 85% of the cells lost their viability determined by viable cell count when polyP 15 was added to the culture of growing S. mutans GS5 at MIC, suggesting that polyP 15 has bacterial effect on the bacterium. And more than 99.9% of the cells lost their viability determined by viable cell count when polyP 15 was added to the culture of growing S. sobrinus 6715 at MIC, suggesting that polyP 15 has bacterial effect on the bacterium. Intracellular nucleotide release from S. mutans CS5 and S. sobrinus 6715 was increased in the presence of polyP 15 for 5h but was not really reversed by the addition of divalent cations like $Ca^{++}\;and\;Mg^{++}$. The majority of the cells appeared to be atypical in their shape, demonstrating accumulation of highly electron-dense granules and ghost cells. The overall results suggest that polyP have a strong bactericidal activity against S. mutans and S. sobrinus in which lysis in relation to chelation may not play the major role but unknown mechanism that possibly affects the viability of the bacterium may be involved. PolyP may be used as an agent for prevention of dental caries.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.259-260
• /
• 2011

대기압 플라즈마는 멸균과 살균, 지혈, 피부재생, 치아 미백 등 여러 의학 분야를 대상으로 그 효과를 나타내고 있으며, 플라즈마 장비를 만들어 내기 위해 부피가 큰 진공 장비가 필요하지 않다는 점에서 대기압 플라즈마는 그 활용과 효과에 있어 큰 기대를 받고 있다. 대기압에서 플라즈마는 다양한 주파수를 이용하여 만들어져 왔으며, 본 연구실에서 연구하고 있는 수백 MHz-수 GHz 대역의 파워를 사용하는 플라즈마의 경우 대기압 플라즈마를 의학 분야에 사용할 때 만족해야 할 조건들에 만족하는 특성을 보여준다. 기존의 고주파를 사용하는 장비의 경우 추가적인 Matching 장비로 인해 플라즈마를 만들기 위해 큰 장비와 높은 파워가 필요한 단점이 있었다. 하지만 이 마이크로웨이브 장비는 전송선 이론을 기반으로 장비 자체가 구조적인 Matching이 이루어 지도록 설계되었다(그림 1). 즉, 추가적인 Matching 장비의 필요 없이 외부에서 파워를 주는 것만으로 플라즈마를 발생 시킬 수 있으며, 50% 이상의 파워 효율을 보여준다. 또한 그 크기도 손에 쥐고 사용할 수 있을 볼펜 정도의 크기이며, 3W의 정도의 저 전력으로 플라즈마를 발생 시켰다. 높은 에너지를 가지는 전자들은 공급되는 기체뿐만 아니라, 주변 공기와의 반응하여 여러 응용분야에 적합한 활성 종을 다량 만들어내게 된다. 본 연구실의 강점인 플라즈마 시뮬레이션으로 얻은 결과에서 주파수가 올라 갈수록 높은 에너지를 가지는 전자들이 많아지는 것을 보여준다. 그리고 발생시킨 플라즈마의 광학 특성에서도 생의학 분야에 적합한 많은 활성 종들이 발생 되는 것을 확인하였다. 일반적으로 의학 분야에 사용되는 플라즈마의 경우 플라즈마에서 발생하는 열에 의한 피해를 최소화 하는 것이 중요하다. 마이크로웨이브 플라즈마의 경우, 그 플라즈마의 온도가 50$50^{\circ}$C 미만으로 의학 분야에 사용하기 적합하다. 또한 구동 주파수가 올라갈수록 플라즈마를 유지하는데 필요한 전압이 상대적으로 낮아지게 되는데, 이는 전기적 쇼크 등 플라즈마 의용에서 발생하는 안전성 문제에 있어서도 마이크로 웨이브 장비가 좋은 점이다. 본 플라즈마 장비를 구동하기 위한 손바닥 크기 정도의 소형의 전용 파워 장치를 개발함으로써 저전력 소형 플라즈마 장치를 개발하는 것을 목표로 하고 있다. 마이크로 웨이브 장비는 여러 가지 분야에서 그 효과를 검증 받았다. 혈액 응고 실험에서 30초 정도의 짧은 처리만으로도 자연 응고에 비해 탁월한 지혈 효과를 보여줬다 (그림 2). 충치를 발생시키는 대표적인 구강균인 S.mutans의 살균 실험에서 Ti02와의 복합적인 처리를 통해 30초 미만의 처리로 처리하지 않은 것에 비해 10-6 만큼의 줄어드는 살균 효과를 보여줬다. 뿐만 아니라 치아의 미백에 있어서도 탁월한 효과를 나타냈다. 현재 본연구실에서는 마이크로 웨이브 장비의 기본적인 구조를 응용하여, 좀더 넓은 영역을 처리할 수 있는 대면적 마이크로 웨이브 장비를 위한 연구를 수행 중이다.