• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.121-125
• /
• 2004

Recently, High Tensile Steel is adapt to thin plate on the steel structure and marine structure is used widely, It is possible for buckling happens great. Specially, Initial deflection of ship structure happens in place absence necessarily by heat processing of welding or cutting etc. This Initial Deflection is exerted negative impact when thin plate absence complicated nonlinear behaviour accompanied secondary budding. As a result, must idealize initial deflection that occurrence is possible to endow stability and accuracy in the hull structure or marine structure and reflect in early structure design considering secondary buckling. Longi direction of compressive load interacts and analyzed finite element series analysis that apply various kinds initial deflection shape measured actually on occasion that is arranged simply supported condition in this research. Applied ANSYS (elasto-plasticity large deformation finite element method) to be mediocrity finite element program for analysis method and analysis control used in Newton-Raphson method & Arc-length method.

• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.223-228
• /
• 2008

As most of small fishing boats made of FRP have been constructed by experience in Korea, some structural safety problems have been occurred occasionally. To improve the structural strength and reduce the costs for construction and operation, optimum design for small fishing boat was carried out in this study. The weight of fishing boat and the main dimensions of structural members are chosen as objective function and design variables, respectively. By the combination of global and local search methods, a hybrid optimization algorithm was developed to escape the local minima and reduce CPU time in analysis procedure, and finite element analysis was performed to determine the constraint parameters at each iteration step in optimization loop. Optimization results were compared with the real existing fishing boat, and the effects of optimum design were examined from points of view; structural strength, material cost, etc.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.415-415
• /
• 2011

수문학 또는 하천유출은 크게 기후학적은 인자 (온도, 바람, 상대습도 등)나 지형학적 인자 (지표면 경사, 흙의 종류, 하천의 면적, 하천의 길이 등)들에 의해 결정된다. 지형학적 인자들 중인 하천의 면적 그리고 주하천의 길이에 의한 영향은 비첨두홍수량의 과 수문곡선의 모양에 크게 관여되어 있다. 일반적으로 유역형상이 좁고 주하천의 길이(유로연장)가 긴 하천의 경우 단위면적당 유출량과 시간과의 그래프에서 수문곡선은 넓고 낮은 형태 모습을 지니지만 유역의 형상이 넓고 주하천의 길이기 짧은 하천은 수문곡선이 좁고 높은 형태의 모습을 가진다. 이러한 유역형상의 차이에 따라 Horton (1932)은 유역의 면적과 주하천의 길이의 비로 형상계수 (Shape Factor)의 공식을 제시하였다. 유역면적에 비해 유로연장이 길면 형상계수가 작아지고 첨두홍수량이 작아지는 반면 유역면적에 비해 유로연장이 짧을수록 형상계수가 커져 첨두홍수량이 커지는 형상을 발견할 수 있다. 형상계수와 비첨두홍수량의 상관관계를 알아보기 위하여 상수 전용댐 안전성 대책 및 치수능력 증대 방안연구 (2008) 보고서에서 적용한 유역들을 비교하였다. 이 보고서에 있는 38개의 유역들 중에서 형상계수가 0< <1 인 유역들을 선택한 후 형상계수와 지속시간별 비첨두홍수량의 관계 그리고 유역면적과 지속시간별 비첨두홍수량의 관계를 도시하였다. 추세선에 의한 결정계수인 $R^2$ 의 값을 비교하여 형상계수와 비첨두홍수량과의 관계를 조명하였다. 또한, 형상계수에 따른 순간단위도의 첨두시간 및 첨두유량을 비교하기 위하여 유역면적이 $300m^2$내외이며, 서로 다른 형상계수를 갖는 유역을 선정하여 연구를 진행하였다. 대상유역의 관측값을 이용하여 Nash모형을 적용한 순간단위도를 산정하였으며, 형상계수에 따른 첨두시간 및 첨두유량의 비교분석을 수행하였다.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.751-754
• /
• 2008

Recently according to increasing of damage in creeks, it has been needed to develop a close-to-nature creek improvement technique considering flood safety as well as the functions of ecosystem and scenery preservation. In this study, the monitoring on creeks in seven provinces was accomplished to develop the technique applicable to domestic creeks between 2002 and 2007. Although the riparian ecosystem was disturbed, after just finishing the improvement on pilot creeks, the result of monitoring showed that restoration rates of creeks were satisfactory by constructing close-to-nature creek revetments. However it is hard to analyze on restoration and permissible tractive force of each revetments constructed in most creeks, because of insufficient monitoring data. Therefore the feasible study on the close-to-nature creek revetments should be performed in the near future through continuous monitoring on creeks.

• Journal of the Korean Institute of Gas
• /
• v.3 no.3 s.8
• /
• pp.58-64
• /
• 1999

This paper has been analyzed for the stress behavior problems of the ring knot membrane unit using the finite element method about the pitch design of the membrane unit, which is one of the most important parameters in manufacturing of the membrane type LNG storage tanks. The FEM results have been compared those of the existing pitch design length. The safety problem of the ring knot membrane model, which is considered in this study, does not come out any more no matter what the pitch length is used in the extra large LNG storage tanks. But in the case of the membrane for LNG tankers, it is advantageous to design the pitch short because of fatigue strength caused by repeated loadings. Looking at the deformation behaviors of the membrane corrugation, the deformation of the hight in the y direction occurs $15{\~}50\%$ more than that of the width in the z direction. It shows also that the deformation of the membrane with $-162^{\circ}C$ cryogenic temperature is not so great compared with the deformation by hydrostatic pressure.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.2
• /
• pp.35-45
• /
• 2019

The enlargement and reduction of river channels can not only change the flow of water but also alter sedimentation patterns, thus hindering smooth flood conveyance. Accordingly, this study aims to analyze the effects of the sudden enlargement of river channels on changes in the riverbed and river flow. For this purpose, as part of the "Hometown River" Construction Project, this study examined the local river Kyungpo-cheon, which a section of the river channel was widened by at least two- to three-fold, using RMA-2 and SED-2D models to simulate the changes in flow characteristics and riverbed variation due to the widening of the channel. The results of the study indicated that widening the Kyungpo -cheon river channel secured its dimensional stability in comparison to before widening. however, due to a flood frequency of more than once per year, future maintenance and management will be costly and time-consuming.

• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.605-618
• /
• 2018

Korea follows the slope design criteria during construction. It was enacted by the Ministry of Land, Transport and Maritime Affairs. There are cases where the Soil-nail is designed as a measure to secure slope stability. The arrangement of the soil-nail may be arranged at equal intervals or may be arranged differently depending on the soil failure model. The optimum design of the countermeasure method is determined by securing stability of the slope through optimization of dimensions and shape. However, when uniform nails are placed at low elevations in slopes, the standard safety factor is exceeded, which may hinder economic design. It is preferable to arrange the reinforcement of the nails over the entire slope. When the horizontal spacing of the nails was topology optimized according to the slope height, it was possible to minimize the amount of reinforcement while satisfying the standard safety factor. Since the active load is reduced in the section where the slope height is lowered, the safety factor after reinforcement may be excessively increased. Therefore, the phase optimization method is proposed as an economical optimal design method using the reinforcing shape density. In addition, a relational expression was designed to optimize the horizontal spacing by slope height.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.261-273
• /
• 2011

Recently, the demands for steel frame are increasing because of the trend and due to the demand for bigger and higher buildings. In the analysis of typical steel frame, connections are based on the idealized fixed or pinned connection. A fixed connection assumes that the relative angle of each member before deformation is the same after the transformation. Therefore, the stiffener reinforces the connection to sufficient rigidity and stability of the panel zone. In the economical aspect, however, the necessity of connection that the stiffener reinforcement has omitted is increasing due to the excessive production as well as labor costs of connection. In contrast, pinned connection is assumed that bending moments between the beams and columns do not transfer to each member. This is easy to make in the plant and the construction is simple. However, the structural efficiency is reduced in pinned connection because connection cannot transfer moments. The introduction of this semirigid process can decide efficient cross-sectional dimensions that promote ease in the course of structural erection, as performed by members in the field-a call for safety in the entire frame. Therefore, foreign countries exert efforts to study the practical behavior and the results are applied to criterion. This paper analyzes the semirigid connection of domestic steel by design specifications of AISC/LRFD and make data bank that pertain to each steel. After wards, the results are compared to those of idealized connection; at the same time, this paper presents a design method that matches economic efficiency, end-fixity, and rotational stiffness.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.205-215
• /
• 2017

This study presents an example of conceptual design for hollow circular section multi-column tower system subjected to 10MW level wind load by introducing a method based on member utilization that examine both structural stability and economical efficiency. The basic assumptions for the proto type of a multi-column tower that can replace a single-cylinder tower were suggested and structural models were constructed following the assumptions and analyzed for identifying member forces. Based on the calculated member strengths and acting loads, the member utilization of the proposed multi-column tower structures were calculated for axial force, shear, bending and torsion and evaluaed for suitability as a wind tower. Design parameters such as steel tube dimensions, slenderness ratio, and number of floors for braces was proposed in the acceptable range of member utilization for conceptual design of multi-column wind towers.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.817-820
• /
• 2008

The river environments of many streams in korea have been deteriorate through the rapid industrialization and urbanization since the 1960s. In korea, on the other hand, much efforts on the research and project have been made for the restoration of the deteriorated streams to close-to-nature. in order to restore the deteriorated streams, therefore, it is necessary to investigate such advanced technologies and materials. In view of this requirement, various research paths are being taken focusing on coarse aggregates to make multi-functional porous concrete having continuous voids so as to improve water and air permeability, acoustic absorption, water purification and applicability to vegetation. The Purpose of this study is to investigate the method for recovery of the environment in the streams area using porous concrete retaining wall block. the multi-P.O.C block applies for test in the Jangduri-cheon have been monitored planting, stability etc. after 6 months, plant grows flourishing and reconstructed in state such as nature rivers.