• Journal of the Korean Home Economics Association
• /
• v.49 no.10
• /
• pp.49-56
• /
• 2011

The purpose of this study is to research the difference between the size suggested by brand uniforms and the size suitable for high school girls. We compared and analyzed the size system of brand uniforms after researching the wearing conditions of uniforms of 4 brands (A, B, C, D) in order to establish a size system of brand uniforms that fits different body types of teenagers. First, we conduct research on the actual condition of brand uniforms worn by high school girls, and investigate unsatisfactory factors and problems. Second, we actually measure the uniform size of each brand and analyze measurement differences between each brand. Our results show each brand uniform has different size specifications and the importance of appropriate size specification is greater as students select uniform based on design and brand awareness rather than body size. Compared with the average body size the skirt and especially the blouse is much smaller with no extra room compared with standard size 85 blouses and size 71 skirts. Therefore, the adjustment of size specification is needed in brand school uniforms. However, a larger scale investigation is needed as this study was conducted with a limited sample size.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.715-721
• /
• 2003

Dental injuries with crown fracture occur frequently, especially in young patient Reattachment of the crown fragment has been shown to yield good esthetic results in that original tooth anatomy is restored with a material that abrades at a rate indntical to that of the adjacent tooth substance and at the same time permits continual monitoring of pulpal status through the fragment. Case 1 was complicated crown fracture with pin-point bleed ing, that was treated by direct pulp capping with calcium hydroxide and fragment reattachment. Case 2 was in trusive luxation with complicated crown fracture and was treated by pulp treatment and fragment reattachment. Case 3 was uncomplicated crown fracture, and fracture line involved slightly biologic width and treated by reattachment of the crown fragment.

• Journal of agricultural medicine and community health
• /
• v.35 no.1
• /
• pp.56-66
• /
• 2010

Objectives: The study aimed to explore dental status and denture satisfaction in some rural elderly people. Methods: A total of 546 participants aged over 65 years was surveyed cross-sectionally. The subjects were surveyed with regard to their denture satisfaction by a structured questionnaire. The Wilcoxon or Kruskal-Wallis test was used for analysis. Results: As for respondents' satisfaction for dentures by the Likert scale of 5 score, aesthetic satisfaction (3.73) was highest, followed by general satisfaction (3.56) and masticatory functions satisfaction (3.45). In addition, the educational level, occupation, monthly income, the number of remaining teeth, use of denture variables have statistically significant difference in the denture satisfaction of those elderly people interviewed. Conclusions: The results showed that denture satisfaction in some rural elderly people was different in each categories. Consequently, providing tailor-made oral health education programs for the effective denture management of the elderly people should be needed in order to improve the quality of life of the aged.

• Journal of Korean Home Economics Education Association
• /
• v.21 no.1
• /
• pp.141-155
• /
• 2009

Purchasing used school uniforms is to reduce environmental pollution and expenses, and to enhance a feeling of wearing satisfaction for school uniforms by improving size fitting. In order to improve reutilization of used school uniforms, uniform purchasing behavior, awareness of the reutilizing markets of used school uniforms, and the running conditions of reutilizing markets of used school uniforms were analyzed through the survey. The subjects are 741 students of middle and high schools in Seoul and Kyeonggi Province in this study. The results are as follows. First, the better-fitted uniforms students wear, the higher satisfaction they feel. Therefore, it is desirable for students to wear the uniforms which are well fitted for each student. Second, the higher aware of environment students are and the more environmental preservation behavior they do, the higher awareness of wearing used school uniforms they are. In order to enhance students' awareness of reutilizing markets of used school uniforms, it is important to educate students about the environment systematically and to promote recycling events. Third, the reasons for not purchasing used school uniforms are difficulty in access to the repurchasing market and the sanitary problem. Therefore, it is suggested that environmental education which boosts students' awareness of environment and reutilization events should be held to make reutilizing markets of used school uniforms vigorous. Moreover, it is necessary to make reutilizing markets easy to access and improve cleaning and repairing system.

• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.48-53
• /
• 1996

The role of the torquer in dynamically tuned gyroscope (DTG) is to erect the slanted rotor straight. This IBper presents the design method of the torquer. The torquer must satisfy the desired maximum angular velocity condition. The performance of magnet-residual flux density, maximum energy product, and so on-is limited by the material characteristics. So we should design the torquer with the limited condition that magnet performance is given. If the mechanical size of DTG is deter-mined, the dimension of the torquer is calculated and the space of the torquer becomes constant. Therefore, if we determine the diameter of the torquer coil, the number of coil turns is calculated automatically. Using these dimensions, we can calculate the torque and the scale factor. The maximum angular velocity is computed if we know the maximum current density. The analysis of the torquer was carried out by the 3-dimensional finite element method. The proposed algorithm of the torquer design was valid in comparison with the experimental data obtained from fabricated DTG.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.315-326
• /
• 2001

This study is to suggest data for setting school uniform size with the size satisfaction degree through finding out the physical body change and uniform size problems following an increase in age during middle school girl days. For this purpose, by analyzing the physical body size data of 13~15 age of girls among $\ulcorner$human body size data of the youth for product design$\lrcorner$publicized under sponsorship of National Technology Quality Institute in 1999 the physical body size change by part following an increase in age during middle school girl days was found out and the most frequent physical body size by grade was suggested. Questionnaire about uniform production status and product size at the object of uniform makers were measured directly, a school uniform wearing status and size satisfaction degree by part were at the abject of middle school girls were examined by means of questionnaire and unsatisfactory factors in uniform size were found out. Based on collected data the most optimum product size in each part by item were suggested. The method of suggesting the most optimum size suitability by item was decided based on the result of survey into corresponding title and product size by maker and that of survey into the size satisfaction degree of middle school girls by maker, and the product size of maker showing the highest size satisfaction degree was selected as the most optimum product size.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.323-324
• /
• 2021

본 연구는 애슬레저 레깅스의 주 소비층인 20대 여성의 체형에 적합한 레깅스 패턴을 개발하기 위한 선행연구로, 20대 대학생을 대상으로 레깅스의 착용실태를 알아보고 애슬레저 레깅스의 선호도를 파악하고자 하였다. 본 연구는 20대 여대생 189명을 대상으로 하였으며, 구글 설문지를 통해 조사하였다. 분석은 SPSS 26.0 프로그램을 활용하였다. 레깅스는 운동용으로 착용하고 검은색의 발목까지 오는 밀착되는 기본 레깅스 디자인에 대한 선호가 높았으며, Y존 부위에 대한 불편함을 호소하는 경우가 많았다. 동작 시에는 허리가 노출되는 것에 대한 불편함을 호소하는 경우가 많았다. 선호 브랜드는 아디다스가 가장 많았고 레깅스에 몸매 보정 기능이 추가되기를 원하였다. 선호하는 브랜드를 구매했을 경우 디자인, 치수, 소재, 활동성, 내구성 등 대부분 항목에서 만족도가 높았다. 원단을 고려하여 레깅스를 구매한 경우에는 봉제상태에 대한 만족도가 높고, 브랜드를 고려하여 구매한 경우 가격에 대한 만족도가 높은 것으로 나타났다. 본 연구의 결과를 일반화시키는 데 주의하여야 하며, 향후 연구에서는 좀 더 포괄적인 연령대와 남성에 대한 조사가 이루어져야 할 것으로 생각된다.

• Korean Journal of Human Ecology
• /
• v.9 no.2
• /
• pp.205-213
• /
• 2000

The purpose of this study was to study the degree of consciousness and satisfaction of body cathexis of high school girls' lower bodyshape. The subjects in this study were 296 high school girls. The results were as follows : 1. The degree of satisfactions of girth items in lower part of the body were influenced by real body size than ideal body size. But the degree of satisfaction of weight was influenced by ideal body size and height was influenced by real size body. 2. The high school girls thought ideal body shape was tall in height, long in leg, slim in girth and light in weight. Therefore, they wanted to have slimmer, longer, and lighter body size than real body size. 3. The high school girls were more satisfied with lean body type than with standard body type or with obesity body type. Therefore they wanted to be lean body type.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.04a
• /
• pp.190-201
• /
• 1996

설계자는 설계를 진행시켜 가면서 많은 의사 결정을 내려야 한다. 그 결정은 크게 선택 결정과 타협 결정으로 나뉘어질 수 있다. 선택 결정은 여러 평가 기준을 고려해 여러 대안들 중 하나를 선택하는 결정이며 타협 결정은 제한 조건과 목표들을 가장 잘 만족하는 설계 대안의 주요 치수를 결정하는 것이다. 이때 두 결정의 결과는 설계자의 의사에 크게 의존하게 된다. 따라서 설계자의 의사를 체계적이고 정확하게 반영시켜줄 필요가 있다. AHP 기법은 불분명한 선택 문제에 있어서 문제를 계층적으로 분석하여 평가함으로써 설계자의 의사를 체계적으로 반영시켜줄 수 있다. 또한 정성적인 성질들을 정량적인 판단 기준에 따라 평가함으로써 설계자의 의사를 보다 일관적으로 반영할 수 있다. 보통 공학 문제의 경우 하나의 설계 대안을 선택하고 또한 그 대안의 주요 치수를 동시에 결정해야 하는 결합된 문제이다. 이때 선택에 필요한 각 대안의 속성이 타협 문제 변수들의 함수로 표현되기 때문에 최적 과정 중에 계속 변화하게 된다. 또한 여러 속성을 고려할 경우 자릿수와 단위가 모두 다르기 때문에 속성들의 평가가 표준적으로 이루어져야 한다. 이 부분에 학습된 인공 신경망을 도입함으로써 변화하는 속성치를 자동적으로 평가할 수 있으며 설계자의 의사와 경험적인 지식도 반영할 수 있게 되었다.

• The Research Journal of the Costume Culture
• /
• v.20 no.2
• /
• pp.154-168
• /
• 2012

This study examined size combination suitability of the underwear sets in home shopping and discussed the degree of consumer satisfaction as well as purchase criteria and evaluation after purchase of women's underwear. The survey was conducted from 1st to 15th September 2010 on a total of 300 women aged between 20 to 50, living in Seoul and Gyeonggi-do region who had bought women's underwear through home shopping. The completed data, 245 out of 300, was used for the final analysis. The analysis conducted in the study with SPSS statistics package includes frequency analysis, reliability analysis, factor analysis, chi-square analysis, $t$-test, ANOVA and Duncan's Multiple Range test. Evaluation items on purchase criteria and evaluation after purchase were processed with factor analysis. The results of the present study showed that product differentiation strategies are required based on age in order to improve consumer satisfaction and repurchase intention in home shopping underwear. Moreover, most of underwear products sold in sets in home shopping are provided based on the brassiere size. As a result, women who do not fit into the home shopping underwear size combination may be less satisfied. When consumers choose their own brassier and briefs size or combinations of various brassier and briefs sizes, it would increase consumer satisfaction.