• The Journal of the Korean dental association
• /
• v.18 no.10 s.137
• /
• pp.791-797
• /
• 1980

• The Journal of the Korean dental association
• /
• v.18 no.10 s.137
• /
• pp.783-790
• /
• 1980

• The Journal of the Korean dental association
• /
• v.29 no.12 s.271
• /
• pp.925-928
• /
• 1991

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.266-270
• /
• 2010

In case of the Dental X-ray apparatus, the diameter (or the field size) of the tip of the cone should be less than 7 cm according to the Diagnosis Radiation Equipment Safety Management. However, deviation from the field is not expected to be big as photography is made at close range from the skin. Also, as the size of film or digital detector used in intra-oral photography is $3\times4cm^2$, the size mentioned above can be considered to be much bigger. Furthermore, the patient dose by short-distance photography can not be ignored. Therefore, effect on the patient dose, resolution and image qualty was examined by reducing the cone diameter by 0.5 cm interval. The result showed that the patient dose was reduced and a partial improvement in picture contrast was observed. Therefore, it can be concluded from these results that further investigation may be worthwhile in terms of policy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.425-431
• /
• 2019

This clinical case report describes the digital workflow that combines a face scan, cone beam computed tomography and an intraoral scan to visualize the outcome of prosthodontic treatment in the anterior region. This approach improves communication between clinic, laboratory and patients. A patient with healthy general condition came for a restorative treatment to treat post-traumatic central incisors of maxilla. A virtual patient replica was made by incorporating a face scan, cone beam computed tomography and an intraoral scan. Design mockup of definitive restorations was shown to the patient and modified according to the patient's desire. This digital workflow facilitates the fabrication of optimal esthetic restorations, and enhances the predictability of outcome of restorations.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.16 no.1
• /
• pp.103-112
• /
• 1986

The purpose of this study was to investigate the numbers and causes of retakes in 300 complete mouth radiographic surveys made by 75 senior dental students. According to radiographic techniques and film holding methods, they were divided into 4 groups: Group Ⅰ: Bisecting-angle technique with patient's fingers. Group Ⅱ: Bisecting-angle technique with Rinn Snap-A-Ray device. Group Ⅲ: Paralleling technique with Rinn XCP instrument (short cone) Group Ⅳ: Paralleling technique with Rinn XCP instrument (long cone) The most frequent cause of retakes, the most frequent tooth area examined, of retakes and average number of retakes per complete mouth survey were evaluated. The obtained results were as follows: Group Ⅰ: Incorrect film placement(47.8%), upper canine region, and 0.89 Group Ⅱ: Incorrect film placement (44.0%), upper molar region, and 1.12. Group Ⅲ: Incorrect film placement (79.2%), upper molar region, and 2.05 Group Ⅳ: Incorrect film placement (67.7%), upper molar region, and 1.69. The average number of retakes per complete mouth survey of paralleling technique (Group Ⅲ＋Ⅳ) was higher than that of bisecting-angle technique (Group Ⅰ ＋ Ⅱ) (p<0.01). There was no difference between Group Ⅰ and Group Ⅱ, and between Group Ⅲ and Group Ⅳ in the average number of retakes per complete mouth survey (p>0.05).

• The Journal of the Korean dental association
• /
• v.43 no.10 s.437
• /
• pp.662-671
• /
• 2005

• Journal of the Korean Society of Radiology
• /
• v.5 no.6
• /
• pp.343-349
• /
• 2011

This study was aimed to evaluate the absorbed dose in brain of dental radiography. For radiographic exposure, PLD(photoluminescence dosimetry) chips placed in Rando phantom to measurement the absorbed dose to pituitary gland, orbit, maxillary sinus and submandibular glands, thyroid gland, esophagus. Equipments were used Kodak 2200, Kodak 8000C dental radiographic systems and computed tomography(Lightspeed VCT). The absorbed doses were measured at the same exposure parameters and distance by the clinical factor(kV, mA, sec). The result were as follows ; The absorbed dose for intra-oral radiography were 0.02~2.47cGy, the greatest absorbed dose was 2.47cGy for thyroid gland in maxillary right molar projection. the lowest adsorbed dose was 0.02cGy for submandibular glands in lower anterior projection. The absorbed dose for extra-oral radiography were 0.36~3.44cGy of cephalometric method, 0.14~12.82cGy of panoramic method, 8.17~253.63cGy of computed tomography, the greatest adsorbed dose was 253.63cGy for submandibular glands in maxillary CT scan. the lowest adsorbed dose was 0.14cGy for orbit in panoramic method. As a result, extra-oral radiography was measured more than intra-oral radiography. In particular, method which used computed tomography was measured more than 100 times than intra-oral radiography highly. Therefore, you must show a guideline in extra-oral radiography and an effort to reduce absorbed dose is demanded.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.109-120
• /
• 2010

The purpose of this study was first to analyze the utilization of dental examination through questionnaire to develop a diagnostic reference level of patient doses for dental radiography in korea. 77 dental institutions were classified into three groups: A group for the dental hospitals of the college of dentistry (11 institutions), B group for dental hospitals (30 institutions) and C group for dental clinics (36 institutions). The results were as follows : The mean numbers of unit chairs and medical staffs were 140.2, 15.3 and 5.8 sets, 112.6, 7.3 and 1.7 dentists, 3.1, 0.5 and no one radiologic technologists, and 19.7, 12.5 and 3.3 dental hygienists in A, B and C groups, respectively. The mean numbers of dental X-ray equipments were 14.64, 3.21 and 2.19 in A, B and C groups, respectively. Intraoral dental X-ray unit was used the most, the following equipments were panoramic, cephalometric, and cone-beam CT units. The most used X-ray imaging system was also digital system (above 50%) in all three groups. Insight dental film (Kodak, USA) having high sensitivity was routinely used for periapical radiography. The automatic processor was not used in many dental institutions, but the film-holding device was used in many dental institutions. The utilization rates of PACS in A, B and C groups were 90.9%, 83.3% and 16.7% respectively, and the PACS software program was used the most PiView STAR (Infinitt, Korea). The annual mean number of radiographic cases in one dental institution in 2008 for A group was 6.8 times and 21.2 times more than those for B and C groups, and periapical and panoramic radiographs were taken mostly. Tube voltage (kVp) and tube current (mA) for periapical radiography were similar in all three groups, but exposure time in C group was 12.0 times and 3.5 times longer than those in B and C groups. The amount of radiation exposure in C group, in which dental hygienists take dental radiographs, was more than those in other groups. The exposure parameters for panoramic radiography were similar in all three groups. In conclusion, the exposure parameters in dental radiography should be determined with reference level, not past experiences. Use of automatic processor and film-holding devices reduces the radiation exposure in film system. The quality assurance of dental equipments are necessary for the reduction of the patient dose and the improvement of X-ray image quality.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.1
• /
• pp.45-52
• /
• 2015

The purpose of this study was to compare and evaluate facemask effects when two types of intraoral appliances were used for maxillary protraction for patients with class III malocclusion. Eighteen patients with class III malocclusion were treated with a facemask for an average of 12 months. Two types of intraoral appliances were used: nine patients were treated with bonded expander (Group 1), and nine patients with Hyrax (Group 2). Cephalometric radiographs were taken before and after treatment. Cephalometric radiographs were traced, analyzed, and the results such as sagittal, vertical and soft-tissue changes were compared between two groups. The amount of anchorage loss was also measured to evaluate the difference between two groups. All patients showed significant sagittal skeletal changes after treatment, and there was no statistically significant difference between the two groups. When anchorage loss was evaluated, no differences were shown between the two. Facemask with Hyrax or bonded expander is similarly an effective method as a treatment in class III malocclusion patients.