• The korean journal of orthodontics
• /
• v.40 no.5
• /
• pp.294-303
• /
• 2010

Objective: This study was designed to measure the surface roughness at the slot floor of various ceramic brackets. Methods: One kind of stainless steel bracket ($Succes^{(R)}$), two kinds of monocrystalline brackets (Inspire $Ice^{(R)}$, $Perfect^{(R)}$) and two kinds of polycrystalline brackets (Crystalline $V^{(R)}$, $Invu^{(R)}$) were examined. Atomic force microscopy (AFM) was used to measure the surface roughness of each bracket. Data acquisition and processing were performed using $SPIP^{TM}$. Results: The differences in values of Sa, Sq, and Sz in $Invu^{(R)}$ and Inspire $Ice^{(R)}$ were not statistically different from the control group $Succes^{(R)}$. The values of Sa, Sq, and Sz of $Perfect^{(R)}$ and Crystalline $V^{(R)}$ were greater than those of $Succes^{(R)}$. Differences of all the Sa, Sq, and Sz values between $Perfect^{(R)}$ and Crystalline $V^{(R)}$ were not statistically significant. Conclusions: It is concluded that the slot surfaces of $Succes^{(R)}$, Inspire $Ice^{(R)}$, and $Invu^{(R)}$ were smooth compared to those of Crystalline $V^{(R)}$ and $Perfect^{(R)}$.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.205-218
• /
• 1996

A given facial type can be considered as a syndrome in which various features are aggregated, so a single parameter is not sufficient to accurately identify a given facial type. This study was designed to identify & characterize the skeletal types that blend under the headline-'Cl III,deepbite'. Cephalograms of thirty-four untreated mixed dentition patients, selected mainly on the basis of clinical impression of Cl III with reduced lower face heights were studied. The following conclusion can be drawn. 1. Cl III malocclusion with reduced lower face height could be classified into three types. 2. Subtype 1 was identified by the following features : strong ramus, more anteriorly positioned upper molars without alveolar hypoplasia, acutely reduced Mn. plane angle. 3. Subtype 2 was characterized by a short ramus, sharply reduced postrior alveolar height, and normal Mn. plane angle. In general, this type had hypoplasia tendency in the vertical dimension. 4. In subtype 3, the AUFH occupying more percentage than ALFH was a outstanding feature. Ramal height was in normal range, alveolar hypoplasia and slightly reduced Mn. plane angle was observed. 5. The features of the subtypes were reflected in certain indices, which can be regarded as discriminative index. LAFH: if reduced, regardless of subtypes, indicates reduced lower ant. face height consistently. FHR: when this ratio is increased, it indicates subtype 1. FHI: when this ratio is in normal range, it indicates subtype 2. FPI: if reduced greatly, it indicates subtype 3.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.117-123
• /
• 2010

Tooth eruption is the movement of the tooth from the developing place in the alveolar bone to the functional position in the oral cavity. The permanent incisors originate from the dental lamina on the lingual side of preceding deciduous tooth and erupt to the level of the occlusion through the well developed gubernacular cord. Ectopic eruption is a developmental disturbance in the eruption pattern of the permanent dentition. Most of the ectopically erupted lower incisor has been found in lingual side. The ectopically erupted tooth could be repositioned by orthodontic force in the early mixed dentition, which could help preventing the problems of loss of space and the lingual tilting of the lower anterior teeth. An eight-year-old girl visited the department of pediatric dentistry, Yonsei Dental University Hospital, for the evaluation and the treatment of the lower right lateral incisor, which was horizontally erupted in the lingual side, parallel to the mouth floor. Her tongue was placed on the labial side of that tooth. There was no previous dental history of dental caries or trauma on the pre-occupied primary incisor. Clinical and radiographic examinations including the computed tomography(CT), showed no evidence of dilacerations on root. Therefore, we decided to start active orthodontic traction of the lower right lateral incisor. We designed the fixed type of buccal arch wire and the lip bumper with hook for the traction. Button was attached to the lingual side of the ectopically positioned tooth. Elastic was used between the appliance and the button on that tooth. After the tooth become upright over the tongue level, appliance was change to the removable type and periodic check-up with occlusal guidance was followed to monitor the position of the tooth. In this case using the fixed appliance with modified form of lip bumper and hook embedded in acrylic part instead of extraction was very efficient up-righting the ectopically erupted tooth toward the occlusal plane.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.815-824
• /
• 1997

The purpose of this study is to develop the basic algorithm for the finite element method modeling of individual malocclusions. Usually, a great deal of time is spent in preprocessing. To reduce the time required, we developed a standardized procedure for measuring the position of each tooth and a program to automatically preprocess. The following procedures were carried to complete this study. 1. Twenty-eight teeth morphologies were constructed three-dimensionally for the finite element analysis and saved as separate files. 2. Standard brackets were attached so that the FA points coincide with the center of the brackets. 3. The study model of a patient was made. 4. Using the study model, the crown inclination, angulation, and the vertical distance from the tip of a tooth was measured by using specially designed tools. 5. The arch form was determined from a picture of the model with an image processing technique. 6. The measured data were input as a rotational matrix. 7. The program provides an output file containing the necessary information about the three-dimensional position of teeth, which is applicable to several finite element programs commonly used. The program for a basic algorithm was made with Turbo-C and the subsequent outfile was applied to ANSYS. This standardized model measuring procedure and the program reduce the time required, especially for preprocessing and can be applied to other malocclusions easily.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.93-107
• /
• 2004

Enlow's counterpart analysis explains the complex with anatomic and developmental characteristics where craniofacial aspect of Individuals has been developed. Counterpart analysis does not compare individual measurement with the normal value from the average of majority but analyzes by comparison of values that each individual has. In this study we examined surgical changes in skeletal Class III malocclusion patients(male 40, female 40) and compared them with normal occlusion patients using counterpart analysis. The results indicated that : 1. Skeletal anterior-posterior discrepancy was relieved by shortening of the ramus width(B3). 2. The ramus alignment(R3, R4) was displaced posteriorly and the occlusal plane angle(R5) was rotated clockwise. 3. Skeletal Class III pattern was relieved in the post-operative group, but differences in the level of the cranium(R1, R2) was remaining compared to the normal occlusion patients. 4. In the comparison of surgery methods, the two-jaw surgery group presented changes In the maxillary length(A4), ramus alignment(R3, R4) and occlusal plane angle(R5) compared to the one-jaw surgery group, but the differences were not significant. In the past study about Korean skeletal Class m patients, the skeletal characteristics are upward backward rotation of the cranial base, posterior displacement of the maxilla, forward inclination of the ramus and lengthening of the mandibular body, but in this study, skeletal Class m pattern was relieved by shortening of the ramus width and maxillary advancement by orthognathic surgery, because orthognathic surgery is usually performed on limited areas in the maxilla and the mandible.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.74-83
• /
• 2006

Analysis of lateral cephalometric radiograph (cephalogram) has been used routinely to evaluate skeletal and dental relationships, but analysis of the lateral facial photograph has not been used frequently for evaluation of skeletal relationships. As concerns about harm of X-ray irradiation increases, this study was planned to evaluate the possibility of substituting analysis of the lateral cephalogram with analysis of the lateral facial photograph by comparing these two analyses. According to the ANB values from cephalometric analysis, subjects were divided into three groups: Class I malocclusion group (n=32). Class II malocclusion group (n=32), and Class III malocclusion group (n=31). After measurements of angles indicating horizontal and vertical relationships of the maxilla and mandible on the lateral cephalograms and photographs, differences between Class I, II and III groups were evaluated. To evaluate the similarity between two similar values in the cephalograms and photographs, t-test using standardized variable Z and correlation analysis were performed in the Class I malocclusion group. The results showed that 1) SnN'Pg' on the photograph can be used to evaluate the antero-posterior relationship of the maxilla and mandible (ANB), 2) N'-Sn/Sn-Pg' on the photograph can be used to evaluate facial convexity (NA/APg), 3) Sn-Tra-Me' on the photograph can be used as a measurement similar to FMA. In conclusion, partly substituting lateral cephalogram analysis with lateral facial photograph analysis was possible in the evaluation of the maxilla and mandible.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.159-172
• /
• 2001

Three dimensional analysis of malocclusion and craniofacial deformation is essential for the successful orthodontic treatment. But the orthodontists are not familiar with diagnosis and treatment plane based on lateral cephalometric analysis. Since orthodontists do not posses a sufficient knowledge in standard value of posteroanterior cephalometric anaysis and of clinical importance for transverse jaw growth. In this study male(n=130) and female(n=171) aged from 6 to 16 and diagnosed as Class I malocclusion were selected to analysis width of cranium, maxilla and mandible on the posteroanterior cephalogram. The changes as a function of chronologic age and cervical vertebrae maturity index(CVXI) were examined. The Proper regression model was selected by sex with polynominal regression models and method of variable selection. Mean of each measurements and 70% confidence interval of individual measurement according to age was assesed and a graphs were made. Results are as follows :1. All the measurements for the width are gradually incresed as increase in chronologic age and CVMI. From the total amount of change between age 6 and 16, there is a tendency that mandibular width is broader than maxillary width and the width of male is broader than female. 2. There is no statistically significant sexual difference in Mx-Mn difference, Mx-Mn width differential, Mx/Mn ratio according to age and CVMI. 3. Mean of each measurement and 70% confidence interval of individual measurement according to age and sex were assessed and graphs were made for maxillary width, mandibular width, Mx-Mn difference, Mx/Mn ratio. 4. The width of maxilla and mandible in Korean children are broader than Western children during growth period.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.359-371
• /
• 1996

The purpose of this study was to investigate the changes about the cellular activity on DNA synthesis in the periodontal ligament of dog, in which experimental tooth movement was performed. A control and 5 experimental dogs, one and half year in age, were studied. Light force (50-75g) was applied by placing open-coil spring between left mandibular premolars ; heavy force (250-300g), between right mandibular premolars. Experimental dogs were sacrificed after infusion of bromodeoxyuridine(BrdU), at 12 hours, 1, 3, 7 and 14 days after force application, respectively. And the histologic and the immunohistochemical evaluation were performed on the obtained periodontal tissue around mandibular premolars, using anti-romodeoxyuridine antibody, which can indicate proliferating cells. The results were as follows: 1. The tearing of periodontal ligament and the vascular dilatation at tension side were observed in 12 hours, increasing until 3 days. After then it decreased; Such a finding was more evident in heavy force group than in light force group. 2. The hyalinization of the periodontal ligament and the activity of osteoclast at pressure side were observed in 12 hours, increasing until 3 days. But from 7 days on, it decreased; Such a finding was more evident in heavy force group than in light force group. 3. The BrdU expression in the control group was positive, mainly in the oral epithelium and the fibroblasts in the periodontal ligament, but negative in bone cells in periodontal ligament. 4. The BrdU expression in the experimental group was more positive in tension side than in pressure side; The expression was a little more positive in the periapical area than in the cervical area of tooth. 5. The BrdU expression in light force group was the highest in 1 day, after which it decreased; In heavy force group, it was the highest in 12 hours, after which it decreased. But in 14 days, there was no difference between the experimental group and control group.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.325-340
• /
• 1996

Along with traditional goal of 'straightening teeth', today's orthodontics put more and more emphasis on facial esthetics. Naturally, the importance of soft tissue, which dictates one's facial form, is noticed. There have been many cephalometric studies on growth of hard tissue ; however, only a few on that of soft tissue. In Korea, various methods of sampling, measuring and analysing were used to study soft tissue changes, and yet, soft tissue changes along with process of normal growth have not been studied. The author carried out this study as a part of semi-longitudinal study on craniofacial growth and development of Korean children from ages of six to seventeen. 409 boys and 436 girls who'd had no systemic disease for the last three years and shown normal developmental and occlusal status were chosen as subjects. Cephalometric X-rays were taken of each subject, and facial form, lip position & form, nose form, and lip thickness were measured. Mean values and standard deviations were calculated according to age and gender, and figures and tables were drawn accordingly. The following results were obtained: 1. In respect to facial form, boys showed growth for longer period compared to girls. Also, lower face showed higher growth rate than upper face. 2. There was not much change in thickness of upper and lower lips with age; however, they appeared more prominent compared to caucasian children. 3. Nose grew horizontally with age. 4. Horizontal thickness of lower face increased with age, and upper lip thickness at nose base[A-Sn(FH)] showed more growth than anywhere else.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.171-181
• /
• 2007

Objective: The present study was aimed at an analytical formulation of the micro-implant related torque as a function of implant size, i.e. the diameter and length, screw size, and the bony resistance at the implant to bone interface. Methods: The resistance at the implant to cancellous bone interface $(S_{can})$ was assumed to be in the range of 1.0-2.5 MPa. Micro-implant model of Absoanchor (Dentos Inc. Daegu, Korea) was used in the course of the analysis. Results: The results showed that the torque was a strong function of diameter, length, and the screw height. As the diameter increased and as the screw size decreased, the torque index decreased. However the strength index was a different function of the implant and bone factors. The whole Absoanchor implant models were within the safe region when the resistance at the implant/cancellous bone $(=S_{can})$ was 1.0 or less. Conclusion: For bone with $S_{can}$ of 1.5 MPa, the cervical diameter should be greater than 1.5 mm if micro-implant models of 12 mm long are to be placed. For $S_{can}$ of 2.0 MPa, micro-implant models of larger cervical diameter than 1.5 mm were found to be safe only if the endosseous length was less than 8 mm.