• 대한치과교정학회지
• /
• 제52권6호
• /
• pp.399-411
• /
• 2022

Objective: The objective of this randomized clinical trial was to study the skeletal and dental effects of low-level laser therapy (LLLT) along with a miniscrew-assisted expander (Hyrax) after six months of retention. Methods: After sequence generation, concealed allocation, and implementation, 24 female patients were randomly divided (1:1) into two-groups: bone-borne rapid palatal expansion (BBE) without LLLT (n = 12) and BBE with LLLT (n = 12). Eligibility criteria included female patients aged 10-13 years old with bilateral posterior crossbites. Intraoral and extraoral photographs, cone-beam computed tomography images, and digital study models were obtained before expansion and six months after retention. The 7 mm Hyrax appliance was anchored to four palatal mini-screws, which were activated twice daily for 15 days, then locked and kept in place as a retainer. LLLT was performed in the laser group during expansion and retention, according to the guidelines provided. Results: The records of 24 patients were analyzed. According to the post-retention measurements, both groups showed a significant increase in nasal and maxillary widths and total facial height. In the laser group, the Sella-Nasion-Point A and Point A-Nasion-Point B angles and the interpremolar apical distance were significantly increased. Conclusions: Within the limitations of this study, the results suggest that the parameters and protocol of LLLT do not clinically affect the efficiency of BBE in prepubertal and pubertal patients.

• 대한치과교정학회지
• /
• 제52권6호
• /
• pp.412-419
• /
• 2022

Objective: This study evaluated the effect of cyclic pre-calcification treatment on the improvement of bioactivity and osseointegration of Ti-6Al-4V mini-screws. Methods: The experimental groups were: an untreated group (UT), an anodized and heat-treated group (AH), and an anodized treatment followed by cyclic pre-calcification treatment group (ASPH). A bioactive material with calcium phosphate was coated on the mini-screws, and its effects on bioactivity and osseointegration were evaluated in in vitro and in vivo tests of following implantation in the rat tibia. Results: As a result of immersing the ASPH group in simulated body fluid for 2 days, protrusions appearing in the initial stage of hydroxyapatite precipitation were observed. On the 3rd day, the protrusions became denser, other protrusions overlapped and grew on it, and the calcium and phosphorus concentrations increased. The removal torque values increased significantly in the following order: UT group (2.08 ± 0.67 N·cm), AH group (4.10 ± 0.72 N·cm), and ASPH group (6.58 ± 0.66 N·cm) with the ASPH group showing the highest value (p < 0.05). In the ASPH group, new bone was observed that was connected to the threads, and it was confirmed that a bony bridge connected to the adjacent bone was formed. Conclusions: In conclusion, it was found that the surface treatment method used in the ASPH group improved the bioactivity and osseointegration of Ti-6Al-4V orthodontic mini-screws.

• 대한치과교정학회지
• /
• 제52권6호
• /
• pp.420-431
• /
• 2022

Objective: This systematic review aimed to evaluate periodontal parameters in orthodontically tractioned teeth compared with the respective non-tractioned contralateral teeth. Methods: Search strategies were developed for six electronic databases and gray literature. Random-effects meta-analyses were performed for the outcomes of interest. Furthermore, the certainty of the evidence was assessed using the GRADE (Grading of Recommendations Assessment, Development, and Evaluation) tool. Results: Overall, 2,082 articles were identified, of which 24 were selected for the qualitative synthesis. A significant difference was observed between the impacted and contralateral teeth (mean difference [MD] = 0.25; 95% confidence interval [CI] = 0.10-0.40; I² = 0%) when the gingival index was evaluated. Additionally, impacted teeth showed a greater probing depth, with a significant mean difference between the groups (MD = 0.14; 95% CI = 0.07-0.20; I² = 6%). Most studies had a low risk of bias; however, the certainty of the evidence was very low owing to the design of existing studies. Conclusions: The evidence in the literature indicated that tractioned teeth might show worsening of periodontal parameters related to the gingival index and probing depth; however, the evidence remains uncertain about this outcome. Furthermore, probing depth should be considered regarding its clinical significance because of the small effect size observed.

• 대한치과교정학회지
• /
• 제53권1호
• /
• pp.3-15
• /
• 2023

Objective: Body dysmorphic disorder (BDD) is a form of obsessive-compulsive disorder that may be negatively associated with the self-image. It might be associated with orthodontic treatment demand and outcome, and therefore is important. Thus, this study was conducted. Methods: The Yale-Brown Obsessive-Compulsive Scale modified for Body Dysmorphic Disorder (BDD-YBOCS) questionnaire was used in 699 orthodontic patients above 12 years of age (222 males, 477 females), at seven clinics in two cities (2020-2021). BDD diagnosis and severity were calculated based on the first 3 items and all 12 items of the questionnaire. The dental health component of the index of orthodontic treatment need (IOTN-DHC) was assessed by orthodontists. Multivariable and bivariable statistical analyses were performed on ordinal and dichotomized BDD diagnoses to assess potentially associated factors (IOTN-DHC, age, sex, marital status, education level, and previous orthodontic consultation) (α = 0.05). Results: IOTN-DHC scores 1-5 were seen in 13.0%, 39.9%, 29.8%, 12.4%, and 4.9% of patients. Age/sex/marital status/education were not associated with IOTN-DHC (p > 0.05). Based on 3-item questionnaire, 17.02% of patients had BDD (14.02% mild). Based on 12-item questionnaire, 2.86% had BDD. BDD was more prevalent or severer in females, married patients, patients with a previous history of orthodontic consultation, and patients with milder IOTN-DHCs (p < 0.05). Conclusions: IOTNDHC was negatively/slightly associated with BDD in orthodontic patients. Being female and married may increase BDD risk.

• 대한치과교정학회지
• /
• 제53권1호
• /
• pp.16-25
• /
• 2023

Objective: We aimed to evaluate the cell viability and antimicrobial effects of orthodontic bands coated with silver or zinc oxide nanoparticles (nano-Ag and nano-ZnO, respectively). Methods: In this experimental study, 30 orthodontic bands were divided into three groups (n = 10 each): control (uncoated band), Ag (silver-coated band), and ZnO (zinc oxide-coated band). The electrostatic spray-assisted vapor deposition method was used to coat orthodontic bands with nano-Ag or nano-ZnO. The biofilm inhibition test was used to assess the antimicrobial effectiveness of nano-Ag and nano-ZnO against Streptococcus mutans, Lactobacillus acidophilus, and Candida albicans. Biocompatibility tests were conducted using the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay. The groups were compared using oneway analysis of variance with a post-hoc test. Results: The Ag group showed a significantly higher reduction in the number of L. acidophilus, C. albicans, and S. mutans colonies than the ZnO group (p = 0.015, 0.003, and 0.005, respectively). Compared with the control group, the Ag group showed a 2-log₁₀ reduction in all the microorganisms' replication ability, but only S. mutants showed a 2-log₁₀ reduction in replication ability in the ZnO group. The lowest mean cell viability was observed in the Ag group, but the difference between the groups was insignificant (p > 0.05). Conclusions: Coating orthodontic bands with nano-ZnO or nano-Ag induced antimicrobial effects against oral pathogens. Among the nanoparticles, nano-Ag showed the best antimicrobial activity and nano-ZnO showed the highest biocompatibility.

• 대한치과교정학회지
• /
• 제53권1호
• /
• pp.26-34
• /
• 2023

Objective: The purpose of the present study was to compare the root positions in virtual tooth setups using only crowns in a simulated treatment with those achieved in the actual treatment. Methods: Pre- and post-treatment intraoral and corresponding cone beam computed tomography (CBCT) scans were obtained from 15 patients who underwent orthodontic treatment with premolar extraction. A conventional virtual tooth setup was used for the treatment simulation. Pre- and post-treatment three-dimensional digital tooth models were fabricated by integrating the patients' intraoral and CBCT scans. The simulated root positions in the virtual setup were obtained by merging the crown in the virtual setup and root in the pre-treatment tooth model. The root positions of the simulated and actual post-treatment tooth models were compared. Results: Differences in root positions between the simulated and actual models were > 1 mm in all teeth, and statistically significant differences were observed (p < 0.05), except for the maxillary lateral incisors. The differences in the inter-root angulation were > 1° in all teeth, and statistically significant differences were observed in the maxillary and mandibular canines. Conclusions: The virtual tooth setup using only crown data showed errors over the clinical limits. The clinical application of a virtual setup using crowns and roots is necessary for accurate and precise treatment simulation, particularly in extraction treatment.

• 대한치과교정학회지
• /
• 제53권1호
• /
• pp.35-44
• /
• 2023

Objective: Surgically assisted maxillary protraction is an alternative protocol in severe Class III cases or after the adolescent growth spurt involving increased maxillary advancement. Correction of the maxillary deficiency has been suggested to improve pharyngeal airway dimensions. Therefore, this retrospective study aimed to analyze the airway changes cephalometrically following surgically assisted maxillary protraction with skeletal anchorage and Class III elastics. Methods: The study population consisted of 15 Class III patients treated with surgically assisted maxillary protraction combined with skeletal anchorage and Class III elastics (mean age: 12.9 ± 1.2 years). Growth changes were initially assessed for a mean of 5.5 ± 1.6 months prior to treatment. Airway and skeletal changes in the control (T0), pre-protraction (T1), post-protraction (T2), and follow-up (T3) periods were monitored and compared using lateral cephalometric radiographs. Statistical significance was set at p < 0.05. Results: The skeletal or airway parameters showed no statistically significant changes during the control period. Sella to nasion angle, N perpendicular to A, Point A to Point B angle, and Frankfort plane to mandibular plane angle increased significantly during the maxillary protraction period (p < 0.05), but no significant changes were observed in airway parameters (p > 0.05). No statistically significant changes were observed in the airway parameters in the follow-up period either. However, Sella to Gonion distance increased significantly (p < 0.05) during the follow-up period. Conclusions: No significant changes in pharyngeal airway parameters were found during the control, maxillary protraction, and follow-up periods. Moreover, the significant increases in the skeletal parameters during maxillary protraction were maintained in the long-term.

• 대한치과교정학회지
• /
• 제53권1호
• /
• pp.45-53
• /
• 2023

Objective: This study aimed to evaluate the shear bond strength (SBS) of orthodontic brackets bonded to three-dimensionally (3D)-printed materials after various surface treatments and artificial aging compared with that bonded to computer-aided design/computer-aided manufacturing (CAD-CAM) polymethyl methacrylate (PMMA)-milled materials. Methods: Eighty cylindrical specimens were 3D printed and divided into the following four subgroups (n = 20 each) according to the surface treatment and artificial aging procedure. Group A, sandblasted with 50 ㎛ aluminum oxide particles (SA) and aging; group B, sandblasted with 30 ㎛ silica-coated alumina particles (CO) and aging; group C, SA without aging; and group D, CO without aging. For the control group, 20 CAD-CAM PMMA-milled cylindrical specimens were sandblasted with SA and aged. The SBS was measured using a universal testing machine (0.25 mm/min), examined at ×2.5 magnification for failure mode classification, and statistically analyzed (p = 0.05). Results: The retention obtained with the 3D-printed materials (groups A-D) was higher than that obtained with the PMMA-milled materials (control group). However, no significant difference was found between the study and control groups, except for group C (SA without aging), which showed significantly higher retention than the control group (PMMA-SA and thermocycling) (p = 0.037). Study groups A-D predominantly exhibited a cohesive specimen mode, indicating specimen fracture. Conclusions: Orthodontic brackets bonded to 3D-printed materials exhibit acceptable bonding strengths. However, 3D-printed materials are prone to cohesive failure, which may result in crown fractures.

• 대한치과교정학회지
• /
• 제53권5호
• /
• pp.307-316
• /
• 2023

Objective: To evaluate the effects of an electric toothbrush with vibrational frequencies of 125 Hz and 150 Hz on the orthodontic tooth movement (OTM) rate and the production of prostaglandin E2 (PGE2). Methods: Out of thirty patients (aged 18-25 years; 16 females and 14 males), ten patients each formed Group A and B, who used electric toothbrushes with 125 Hz and 150 Hz vibrations, respectively. The remaining ten patients (Group C) served as the control group and did not use electric toothbrushes. The rate of OTM and levels of PGE2 using microcapillary pipettes were calculated before the start of retraction (T0), on the 30th day (T1), on the 60th day (T2), and on the 90th day (T3) from the start of retraction in all the groups. Results: There was a statistically significant difference in the mean OTM values and PGE2 levels in all three groups at different time intervals, with the maximum difference seen in Group B compared to Group A and least in Group C at T1, T2 and T3. Conclusions: The rate of OTM and levels of PGE2 were highest in patients who used an electric toothbrush with 150 Hz mechanical vibration compared to those who used an electric toothbrush with 125 Hz mechanical vibration and least in patients who did not use an electric toothbrush. Mechanical vibration led to an increase in the PGE2 levels and accelerated the OTM.

• 대한치과교정학회지
• /
• 제53권5호
• /
• pp.336-342
• /
• 2023

Objective: To determine whether the gonial angle on digital panoramic radiographs is associated with vitamin D receptor (VDR) Taql polymorphism. Methods: Genomic DNA samples were collected from the buccal mucosa of patients aged 26-43 years. TaqMan assay for single nucleotide polymorphism genotyping was used to detect the genotype of Taql polymorphism. The gonial angle was measured bilaterally on panoramic radiography. The normal gonial angle was fixed as 121.8°, and it represented the cutoff value for the high gonial angle (HGA) and low gonial angle (LGA) groups. Various genetic models were analyzed, namely dominant (homozygous [AA] vs. heterozygous [AG] + polymorphic [GG]), recessive (AA + AG vs. GG), and additive (AA + GG vs. AG), using the chi-squared test. Results: The reliability of the gonial angle measurement was analyzed using a random sample (26%) of the tests, with the intra-examiner correlation showing an intra-class correlation coefficient of 0.99. The frequencies of the AA, AG, and GG genotypes of rs731236 polymorphism were 40.5%, 41.9%, and 17.6% in the HGA group and 21.8%, 51.0%, and 27.2% in the LGA group, respectively (P = 0.042). A statistically significant difference was observed in the allele frequencies between the two groups (P = 0.011). Moreover, a significant correlation was observed in the dominant genetic model. Conclusions: Taql polymorphism in the VDR gene plays a critical role in the vertical growth of the mandible and decreased gonial angle.