• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.283-283
• /
• 2010

17~18% 대역의 고효율 결정질실리콘 태양전지를 양산하기 위하여 국내외에서 다양한 연구개발이 수행되고 있으며 국내 다결정실리콘 태양전지 양산에서도 새로운 구조와 개념에 입각한 공정기술과 관련 장비의 국산화에 집중적인 투자를 진행하고 있다. 주지하는 바와 같이, 태양전지의 광전효율은 표면에 입사되는 태양광의 반사를 제외하면 흡수된 광자에 의해 생성되는 전자-정공쌍의 상대적인 비율인 내부양자효율에 의존하게 된다. 실제 생성된 전자-정공쌍은 기판재료의 결정상태와 전기광학적 물성 등에 의해 일부가 재결합되어 2차적인 광자의 생성이나 열로서 작용하고 최종적으로 전자와 정공이 완전히 분리되고 전극에 포집되어 실질적인 유효전류로 작용한다. 16% 이상의 고효율 결정질 실리콘 태양전지 양산이 요구되고 있는 현실에서 광전효율 개선 위해 가장 우선적으로 고려되어야 할 변수는 입력 태양광스펙트럼에 대한 결정질 실리콘 표면반사율을 최소화하여 광흡수를 극대화하는 것이라 할 수 있다. 현재까지 다결정 실리콘 표면을 화학적으로 혹은 플라즈마이온으로 50-100nm 직경의 바늘형 피라미드형상으로 texturing 함으로 단파장대역에서 광반사율의 감소를 기대할 수 있기 때문에 결정질실리콘 태양전지효율 개선에 긍정적인 영향을 미치는 것으로 알려져 있다. 고효율 다결정실리콘 태양전지 양산공정에 적용하기 위해 마스크를 사용하지 않는, RIE기반 건식 저반사율 결정질실리콘 표면 texturing 패턴연구를 수행하였다. 마스크없이 표면 texturing이 완료된 시료들에 대하여 A1.5G 표준태양광스펙트럼의 300-1100nm 파장대역에서 반사율과 minority carrier들의 life time 분포를 측정하고 검토하여 공정조건을 최적화 하였다. 저반사율의 건식 결정질실리콘 표면 texturing에 가장 적합한 플라즈마파워는 100W 내외로 낮았고 $SF_6/O_2$ 혼합비율은 0.8~0.9 범위엿다. 본 연구에서 확인된 최적의 texturing을 위한 플라즈마공정 조건은 이온에 의한 Si표면원자들의 스퍼터링과 화학반응에 의한 증착이 교차하는 상태로서 확인된 최저 평균반사율은 ~14% 내외였고 p-형 결정질실리콘 표면 texturing 패턴과 minority carrier의 life time 상관는 단결정이 16uS대역에서 14uS대역으로 감소하는 반면에서 다결정은 1.6uS대역에서 1.7uS대역으로 오히려 미세한 증가를 보여 다결정 웨이퍼생산과정에서 발생하는 saw-damage 제거의 긍정적 효과와 texturing공정의 표면 결함발생에 의한 부정적 효과가 상쇄되어 큰 변화를 보이지 않는 것으로 해석된다.

• Water for future
• /
• v.29 no.4
• /
• pp.209-221
• /
• 1996

It may be difficult to make exact estimates of peak discharge or runoff depth of a flood and to establish the proper measurement for the flood protection since water stages or discharges have been rarely measured at small river basins in Korea. Three small catchments in the Su-Young river basin in Pusan were selected for the study areas. Various runoff parameters for the study areas were determined, and runoff analyses were performed using three different runoff models available in literatures; the storage function method, the discrete, linear, input-output model, and the linear reservoir model. The hydrographs calculated by three different methods showed good agreement with the observed flood hydrographs, indicating that the models selected are all capable of sucessfully modeling the flood events for small watersheds. The storage function method gave the best results in spite of its weakness that it could not be applicable to small floods, while the linear reservoir model was found to provide relatively good results with less parameters. The capabilities of simulating flood hydrographs were also evaluated based on the effective rainfall from the storage function parameters, the $\Phi$-index method, and the constant percentage method. For the On-Cheon stream watershed, the storage function parameters provided better estimates of effective rainfall for regenerating flood hydrographs than any others considered in the study. The $\Phi$-index method, however, resulted in better estimates of effective rainfall for the other two study areas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.592-592
• /
• 2016

국내에는 17,500여개의 농업용 저수지가 전국적으로 분포하고 있다. 국내 농업용 저수지는 대부분이 소규모이며, 연중 수량 변동이 심하고, 유역배율이 작아 태생적으로 수질오염에 취약한 구조로 되어 있다. 특히 농업용 저수지는 도시 근교나 농촌지역에 많이 위치하고 있어 유역 내 축산 농가나 미처리 생활하수에서 유래된 유기물 및 영양염류 유입에 의한 수질오염도가 높다. 저수지에 고농도로 유입되는 유기물, TN, TP를 처리하기 위하여 농어촌연구원과 수생태복원(주)에서는 공동으로 친환경 수처리시설인 생태융합형 접촉산화시스템을 개발하였다. 생태융합 접촉산화수로는 상부 식생과 수로 내의 섬유상 끈상 미생물 접촉재를 이용하여 오염수가 수로를 흐르면서 침전, 여과, 흡착, 산화, 흡수 등 물리학적, 화학적, 생물학적 원리를 이용하여 고농도의 유기물과 질소, 인을 제거하는 물리적, 생물학적 공정을 융복합 기술이다. 본 연구에서는 경기도 시흥시에 소재하고 있는 M 저수지에 현장 Test-bed를 구축하여 수질정화효율을 평가하였다. M 저수지는 유효저수지량이 약 23만톤에 해당하는 소규모 저수지로, 1941년도 준공된 아주 노후화된 저수지로 평균 수심이 2m 이하이고 연중 수질오염도가 높은 저수지이다. 매화저수지 수변에 설치된 생태융합형 접촉산화수로의 전체규모는 길이 8.6m, 폭 2m, 수심 2m에 해당하며, 끈상 미생물 메디아조 3개($2{\times}2{\times}6m^3$), 침전조 1개($2{\times}2{\times}2m^3$)로 구성되어 있다. 기타 부대 장치로는 끈상 메디아조에 산소공급을 위한 Air-mist(마이크로 버블 발생장치), 자동운전계기판, 유입펌프 등이 있다. 생태융합형 접촉산화수로의 처리 공정은 유입수${\rightarrow}$에어미스트${\rightarrow}$고속복합응집장치${\rightarrow}$융복합 산화조(3조)${\rightarrow}$침전조${\rightarrow}$방류로 구성되어 있다. 테스트 베드는 2015년 8월 말경에 구축 완료하였으며, 끈상 미생물 메디아조의 수질정화효율을 평가하기 위하여 9월부터 11월까지 총 7회 걸쳐 유입수와 유출수를 각각 조사하였다. 현장 측정항목인 수온, pH, EC, DO 등은 유입수 및 유출수간 큰 차이가 없었고, COD, SS, Chl-a, TP 등은 수처리시스템 초기 가동시에는 메디아에 미생물 부착율 저조로 유입수 및 유출수 수질농도에 큰 차이가 없었으나, 운영시간의 경과와 함께 메디아의 미생물 충진율이 높아짐에 따라 처리효율이 최대 SS 69.6%, Chl-a 89.3%, TP 89%까지 도달하는 것으로 나타났다. 생태융합 접촉산화수로는 부지 집약적인 컴팩트한 수처리 시설로서 현재 널리 이용되고 있는 인공습지를 대체할 수 있는 경제적인 시설로 판단된다.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.669-673
• /
• 2003

We fabricated a buried-ridge waveguide laser diode (B-RWG LD) which has more advantages for obtaining lateral single mode operation on the same ridge width and for the planarization of the device surface, compared to the conventional RWG LD. In this LD, the difference of the lateral effective refractive index can be controlled by the thickness of the InGaAsP layer which is grown on the active and the p-InP layers. The InGaAsP multiple quantum well was grown on a n-InP substrate by the CBE. The buried ridge structure was formed by selective wet etchings, followed by liquid phase epitaxy methods. The fabricated LD with the ridge width of 7 ${\mu}{\textrm}{m}$ showed a linear increase of the optical power up to 20 ㎽ without any kinks and a saturated output power of more than 80 ㎽. By measuring the far field pattern, we demonstrate that LDs with the ridge widths of 5 ${\mu}{\textrm}{m}$ and 7 ${\mu}{\textrm}{m}$ were operated in a lateral single mode up to 2.7I$_{th}$ and 2.4I$_{th}$, respectively.ely.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.230-231
• /
• 2019

This study is a development on condition based maintenance(CBM) technology which is a core item of future autonomous ships. It is developing to design & installation of condition monitoring system and acquisition & processing of data from ongoing ships for fault prediction & prognosis of engine in operation. The ultimate goal of this study is to develop a predicts and decision support software for marine engine faults. To do this, the FMEA and fault tree analysis of the main engine should be accompanied by the analysis of classification of system, identification of the components, the type of faults, and the cause and phenomenon of the failure. Finally, the CBM system solution software could predict and diagnose the failure of main engine through integrated analysis for bid-data of ongoing ships and engineering knowledge. Through this study, it is possible to pro-actively cope with abnormal signals of engine and to manage efficiently, and as a result, expected that marine accident and ship operation loss during navigation will be prevented in advance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.454-464
• /
• 2023

This paper proposes a low-power 8-bit asynchronous SAR ADC with a sampling rate of 1 MS/s for sensor node applications. The ADC uses bootstrapped switches to improve linearity and applies a VCM-based CDAC switching technique to reduce the power consumption and area of the DAC. Conventional synchronous SAR ADCs that operate in synchronization with an external clock suffer from high power consumption due to the use of a clock faster than the sampling rate, which can be overcome by using an asynchronous SAR ADC structure that handles internal comparisons in an asynchronous manner. In addition, the SAR logic is designed using dynamic logic circuits to reduce the large digital power consumption that occurs in low resolution ADC designs. The proposed ADC was simulated in a 180-nm CMOS process, and at a 1.8 V supply voltage and a sampling rate of 1 MS/s, it consumed 46.06 𝜇W of power, achieved an SNDR of 49.76 dB and an ENOB of 7.9738 bits, and obtained a FoM of 183.2 fJ/conv-step. The simulated DNL and INL are +0.186/-0.157 LSB and +0.111/-0.169 LSB.

• Journal of Chest Surgery
• /
• v.37 no.1
• /
• pp.1-10
• /
• 2004

Background: Currently, the cardiopulmonary machine with non-pulsatile pumps, which are low in internal circuit pressure and cause little damage to blood cells, is widely used. However, a great number of experimental studies shows that pulsatile perfusions are more useful than non-pulsatile counterparts in many areas, such as homodynamic, metabolism, organ functions, and micro-circulation. Yet, many concerns relating to pulsatile cardiopulmonary machines, such as high internal circuit pressure and blood cell damage, have long hindered the development of pulsatile cardiopulmonary machines. Against this backdrop, this study focuses on the safety and effectiveness of the pulsatile cardiopulmonary machines developed by a domestic research lab. Material and Method: The dual-pulsatile cardiopulmonary bypass experiment with total extracorporeal circulation was conducted on six calves, Extracorporeal circulation was provided between superior/inferior vena cava and aorta. The membrane oxygenator, which was placed between the left and right pumps, was used for blood oxygenation. Circulation took four hours. Arterial blood gas analysis and blood tests were also conducted. Plasma hemoglobin levels were calculated, while pulse pressure and internal circuit pressure were carefully observed. Measurement was taken five times; once before the operation of the cardiopulmonary bypass, and after its operation it was taken every hour for four hours. Result: Through the arterial blood gas analysis, PCO2 and pH remained within normal levels. PO2 in arterial blood showed enough oxygenation of over 100 mmHg. The level of plasma hemoglobin, which had total cardiopulmonary circulation, steadily increased to 15.87 $\pm$ 5.63 after four hours passed, but remained below 20 mg/㎗. There was no obvious abnormal findings in blood test. Systolic blood pressure which was at 97.5$\pm$5.7 mmHg during the pre-circulation contraction period, was maintained over 100 mmHg as time passed. Moreover, diastolic blood pressure was 72.2 $\pm$ 7.7 mmHg during the expansion period and well kept at the appropriate level with time passing by. Average blood pressure which was 83$\pm$9.2 mmHg before circulation, increased as time passed, while pump flow was maintained over 3.3 L/min. Blood pressure fluctuation during total extracorporeal circulation showed a similar level of arterial blood pressure of pre-circulation heart. Conclusion: In the experiment mentioned above, pulsatile cardiopulmonary machines using the doual-pulsatile structure provided effective pulsatile blood flow with little damage in blood cells, showing excellence in the aspects of hematology and hemodynamic. Therefore, it is expected that the pulsatile cardiopulmonary machine, if it becomes a standard cardiopulmonary machine in all heart operations, will provide stable blood flow to end-organs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.9
• /
• pp.1378-1386
• /
• 2013

Atopic dermatitis (AD) is a common skin disease characterized by chronic and relapsing inflammatory dermatitis with immunological disturbances. In spite of the continuous increase in the incidence of AD, it is regrettable that till date there is no effective treatment to treat the same. Therefore, the present study was designed to examine the possible anti-atopic effects of Castanea crenata inner shell extracts fermented by Lactobacillus bifermentans (FCS) in 2,4-dinitrochlorobenzene (DNCB) induced AD in NC/Nga mice. Based on the results of HPLC analysis, we found that FCS contains anti-inflammatory factors such as gallic acid (10.18 mg/g) and ellagic acid (2.14 mg/g). The groups that we have used in this study included 0.1%, 1%, 5% fermented Castanea crenata inner shell extracts (FCS 0.1, FCS 1, FCS 5), 1,3-butylene glycol treated control (AD), and normal mice. After topical FCS treatment, we observed that the clinical severity score for AD was lower in both the FCS 1 and FCS 5 groups than the AD group. We also proved beyond doubt that there was improvement of melanin, erythema and skin moisture indices in the FCS 5 group. Spleen index and gene expression levels of pro-inflammatory cytokines such as IL-$1{\beta}$ and TNF-${\alpha}$ were significantly decreased in the FCS 5 group compared to the AD group (P<0.05). Further, we also found that the level of serum immunoglobulin E (IgE) in the FCS-treated group was decreased in a concentration-dependent manner. The results of our study suggest that FCS can be effectively used as a cosmeceutical ingredient for both the prevention and improvement of AD.

• Journal of the Korean Society of Radiology
• /
• v.11 no.1
• /
• pp.9-17
• /
• 2017

A high degree of precision and accuracy in Gamma Knife Radiosurgery(GKRS) is a fundamental requirement for therapeutical success. Elaborate radiation delivery and dose gradients with the steep fall-off of radiation are clinically applied thus necessitating a dedicated Quality Assurance(QA) program in order to guarantee dosimetric and geometric accuracy and reduce all the risk factors that can occur in GKRS. In this study, as a part of QA we verified the accuracy of single-shot dose profiles used in the algorithm of Gamma Knife Perfexion(PFX) treatment planning system employing Variable Ellipsoid Modeling Technique(VEMT). We evaluated the dose distributions of single-shots in a spherical ABC phantom with diameter 160 mm on Gamma Knife PFX. The single-shots were directed to the center of ABC phantom. Collimating configurations of 4, 8, and 16 mm sizes along x, y, and z axes were studied. Gamma Knife PFX treatment planning system being used in GKRS is called Leksell GammaPlan(LGP) ver 10.1.1. From the verification like this, the accuracy of GKRS will be doubled. Then the clinical application must be finally performed based on precision and accuracy of GKRS. Specifically the width at the 50% isodose level, that is, Full-Width-of-Half-Maximum(FWHM) was verified under such conditions that a patient's head is simulated as a sphere with diameter 160mm. All the data about dose profiles along x, y, and z axes predicted through VEMT were excellently consistent with dose profiles from LGP within specifications(${\leq}1mm$ at 50% isodose level) except for a little difference of FWHM and PENUMBRA(isodose level: 20%~80%) along z axis for 4 mm and 8mm collimating configurations. The maximum discrepancy of FWHM was less than 2.3% at all collimating configurations. The maximum discrepancy of PENUMBRA was given for the 8 mm collimator along z axis. The difference of FWHM and PENUMBRA in the dose distributions obtained with VEMT and LGP is too small to give the clinical significance in GKRS. The results of this study are considered as a reference for medical physicists involved in GKRS in the whole world. Therefore we can work to confirm the validity of dose distributions for all collimating configurations determined through the regular preventative maintenance program using the independent verification method VEMT for the results of LGP and clinically assure the perfect treatment for patients of GKRS. Thus the use of VEMT is expected that it will be a part of QA that can verify and operate the system safely.

• Clinical and Experimental Pediatrics
• /
• v.48 no.9
• /
• pp.960-968
• /
• 2005

Purpose : This multi-center, open-label, clinical study was designed to evaluate the safety and immunogenicity of a trivalent, live, attenuated measles-mumps-rubella(MMR) vaccine, $Priorix^{TM}$ in Korean children. Methods : From July 2002 to February 2003, a total of 252 children, aged 12-15 months or 4-6 years, received $Priorix^{TM}$ at four centers : Han-il General Hospital, Kyunghee University Hospital, St. Paul's Hospital at the Catholic Medical College in Seoul, and Korea University Hospital in Ansan, Korea. Only subjects who fully met protocol requirements were included in the final analysis. The occurrence of local and systemic adverse events after vaccination was evaluated from diary cards and physical examination for 42 days after vaccination. Serum antibody levels were measured prior to and 42 days post-vaccination using IgG ELISA assays at GlaxoSmithKline Biologicals (GSK) in Belgium. Results : Of the 252 enrolled subjects, a total of 199 were included in the safety analysis, including 103 from the 12-15 month age group and 96 from the 4-6 year age group. The occurrence of local reactions related to the study drug was 10.1 percent, and the occurrence of systemic reactions was 6.5 percent. There were no episodes of aseptic meningitis or febrile convulsions, nor any other serious adverse reaction. In immunogenicity analysis, the seroconversion rate of previously seronegative subjects was 99 percent for measles, 93 percent for mumps and 100 percent for rubella. Both age groups showed similar seroconversion rates. The geometric mean titers achieved, 42 days pos-tvaccination, were : For measles, in the age group 12-15 months, 3,838.6 mIU/mL [3,304.47, 4,458.91]; in the age group 4-6 years, 1,886.2 mIU/mL [825.83, 4,308.26]. For mumps, in the age group 12-15 months, 956.3 U/mL [821.81, 1,112.71]; in the age group 4-6 years, 2,473.8 U/mL [1,518.94, 4,028.92]. For rubella, in the age group 12-15 months, 94.5 IU/mL [79.56, 112.28]; in the age group 4-6 years, 168.9 IU/mL [108.96, 261.90]. Conclusion : When Korean children in the age groups of 12-15 months or 4-6 years were vaccinated with GlaxoSmithKline Biologicals' live attenuated MMR vaccine ($Priorix^{TM}$), adverse events were limited to those generally expected with any live vaccine. $Priorix^{TM}$ demonstrated excellent immunogenicity in this population.